PLXS F13 10-K
Table of Contents

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10–K
(mark one)
   X    
 
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended September 28, 2013
OR
_____
 
TRANSITION REPORT PURSUANT TO SECTION 13 or 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
Commission file number 001-14423
PLEXUS CORP.
(Exact Name of Registrant as Specified in its Charter)
Wisconsin
 
 
 
39-1344447
        (State or other jurisdiction of
        incorporation or organization)
 
 One Plexus Way
Neenah, Wisconsin 54956
(920) 722-3451
 
(I.R.S. Employer Identification No.)
(Address, including zip code, of principal executive offices and Registrant’s telephone number, including area code)
Securities registered pursuant to Section 12(b) of the Act:
    Title of Each Class
  
Name of Each Exchange on Which Registered
Common Stock, $.01 par value
  
The NASDAQ Global Select Market
Preferred Share Purchase Rights
  
The NASDAQ Global Select Market
Securities registered pursuant to Section 12(g) of the Act:                    None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes    Ÿ    No       
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes        No    Ÿ  
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes    Ÿ    No      
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  Yes    Ÿ    No      
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of the registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. [  Ÿ  ]
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.
 
  
Large accelerated filer    Ÿ  
  
Accelerated filer       
  
 
 
  
Non-accelerated filer         
  
Smaller reporting company         
  
 
 
  
(Do not check if a smaller reporting company)
  
 
  
 
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes         No    Ÿ  
As of March 30, 2013, 34,360,029 shares of common stock were outstanding, and the aggregate market value of the shares of common stock (based upon the $24.31 closing sale price on that date, as reported on the NASDAQ Global Select Market) held by non-affiliates (excludes 415,757 shares reported as beneficially owned by directors and executive officers – does not constitute an admission as to affiliate status) was approximately $825.2 million.
As of November 18, 2013, there were 33,796,557 shares of common stock outstanding.
DOCUMENTS INCORPORATED BY REFERENCE
 
                Document
    
Part of Form 10-K Into Which
Portions of Document are Incorporated
 
Proxy Statement for 2014 Annual
    
 
 
Meeting of Shareholders
    
Part III


Table of Contents

PLEXUS CORP.
TABLE OF CONTENTS
Form 10-K for the Fiscal Year Ended
September 28, 2013
 
 
 




Table of Contents

“SAFE HARBOR” CAUTIONARY STATEMENT UNDER THE PRIVATE SECURITIES LITIGATION REFORM ACT OF 1995:

The statements contained in this Form 10-K that are guidance or which are not historical facts (such as statements in the future tense and statements including believe, expect, intend, plan, anticipate, goal, target and similar terms and concepts), including all discussions of periods which are not yet completed, are forward-looking statements that involve risks and uncertainties. These risks and uncertainties include, but are not limited to: the risk of customer delays, changes, cancellations or forecast inaccuracies in both ongoing and new programs; the poor visibility of future orders, particularly in view of changing economic conditions; the adequacy of restructuring and similar charges as compared to actual expenses; the economic performance of the industries, sectors and customers we serve; the effects of the volume of revenue from certain sectors or programs on our margins in particular periods; our ability to secure new customers, maintain our current customer base and deliver product on a timely basis; the particular risks relative to new or recent customers or programs, which risks include customer and other delays, start-up costs, potential inability to execute, the establishment of appropriate terms of agreements, and the lack of a track record of order volume and timing; the risks of concentration of work for certain customers; our ability to manage successfully a complex business model characterized by high customer and product mix, low volumes and demanding quality, regulatory, and other requirements; the risk that new program wins and/or customer demand may not result in the expected revenue or profitability; the fact that customer orders may not lead to long-term relationships; the effects of shortages and delays in obtaining components as a result of economic cycles or natural disasters; the risks associated with excess and obsolete inventory, including the risk that inventory purchased on behalf of our customers may not be consumed or otherwise paid for by the customer, resulting in an inventory write-off; the weakness of areas of the global economy; the effect of changes in the pricing and margins of products; the effect of start-up costs of new programs and facilities, such as our new facilities in China, Romania and the United States, our announced plans to open a new facility in Mexico and our other recent, planned and potential future expansions or replacements; increasing regulatory and compliance requirements; possible unexpected costs and operating disruption in transitioning programs; raw materials and component cost fluctuations; the potential effect of fluctuations in the value of the currencies in which we transact business; the potential effects of regional results on our taxes and ability to use deferred tax assets; the potential effect of world or local events or other events outside our control (such as drug cartel-related violence in Mexico, changes in oil prices, terrorism and weather events); the impact of increased competition; and other risks detailed below in “Risk Factors”, otherwise herein, and in our Securities and Exchange Commission filings.

In addition, see Risk Factors in Part I, Item 1A and Management's Discussion and Analysis of Financial Condition and Results of Operations in Part II, Item 7 for a further discussion of some of the factors that could affect future results.

*    *    *


3

Table of Contents

PART I
ITEM 1.
BUSINESS
Overview
Plexus Corp. and its subsidiaries (together “Plexus,” the “Company,” or “we”) participate in the Electronic Manufacturing Services (“EMS”) industry. We deliver optimized solutions to our customers through our unique Product Realization Value Stream.  Our customer-focused solutions model seamlessly integrates innovative product conceptualization, design, commercialization, manufacturing, fulfillment and sustaining solutions. Plexus delivers comprehensive end-to-end solutions for customers in the Americas (“AMER”), Europe, Middle East, and Africa (“EMEA”) and Asia-Pacific (“APAC”) regions.

We provide award-winning customer service to more than 140 branded product companies in the Networking/Communications, Healthcare/Life Sciences, Industrial/Commercial and Defense/Security/Aerospace market sectors. Our customers have stringent quality, reliability and regulatory requirements, mandating exceptional production and supply chain agility. Their products require complex configuration management, direct order fulfillment (to end customers) and global logistics management and sustaining solutions. To service the complexities our customers' products demand, we utilize our Product Realization Value Stream, addressing our customers' products from concept to end of life -- conceptualization, design, commercialization, manufacturing, fulfillment and sustaining solutions.

Plexus is passionate about striving to be the leading EMS company in the world at servicing mid-to-low volume, higher complexity customer programs, characterized by unique flexibility, technology, quality and regulatory requirements. To support and deliver on our strategy, we align our operations, processes, workforce and financial metrics through a multidimensional business strategy that includes:

A high performance, accountable organization with a highly skilled and talented workforce that strives to provide customer service excellence,
A customer driven, disciplined deployment of strategic growth through sector based go-to-market strategies,
Execution through continuous evaluation and optimization of our business processes, supporting our return on invested capital (“ROIC”) goal.

We operate flexible manufacturing facilities and processes designed to accommodate customers with multiple product lines and configurations. Each of our customers is supported by a multi-disciplinary customer team. One or more uniquely configured “focus factories,” supported by a supply chain and logistics solution, are designed to meet the flexibility and responsiveness to support customer fulfillment requirements.

Our go-to-market strategy is tailored by business development and customer management teams dedicated to each of the four sectors we serve. These teams execute our sector strategies through expertise in markets and technology as well as unique quality and regulatory capabilities. Our sector teams help define Plexus' strategy for growth with a particular focus on expanding the value-added solutions we offer customers.

Our financial model aligns with our business strategy. Our primary focus is to earn a return on invested capital (“ROIC”) 5% over our weighted average cost of capital (“WACC”). We review our internal calculation of WACC annually; at the end of fiscal 2013 we reduced our estimated WACC from 12.0% to 11.0% for fiscal 2014. We believe economic profit is a fundamental driver of shareholder value. Plexus measures economic profit by taking the difference between ROIC and WACC and multiplying it by invested capital. By exercising discipline to generate an ROIC in excess of our WACC, with focus on economic profit, our goal is to ensure that Plexus creates value for our shareholders.

Relative to our competition, overriding factors such as lower manufacturing volumes, flexibility and fulfillment requirements, as well as complex regulatory environments, typically result in higher investments in inventory and selling and administrative costs. The cost variance from our competitors is especially evident relative to those that provide EMS services for high-volume, less complex products, with less stringent requirements (e.g., consumer electronics).

Plexus serves a diverse customer landscape that includes industry-leading, branded product companies, along with many other technology pioneering start-ups or emerging companies that may or may not maintain manufacturing capabilities. As a result of serving market sectors that rely on advanced electronics technology, our business is influenced by critical technological trends such as the level and rate of development of wired and wireless telecommunications infrastructure, communications data and data bandwidth growth, and Internet usage. In addition to prime technology advancements, key government and policy trends impact our business, including the U.S. Food and Drug Administration's (“FDA”) approval of new medical devices,

4

Table of Contents

defense procurement practices, and other government and regulatory processes. Plexus may benefit from increasing outsourcing trends.

We provide most of our optimized solutions on a turnkey basis, and we procure some or all materials required for product assembly. We provide select services on a consignment basis, meaning the customer supplies the necessary materials and Plexus provides the labor and other services required for product assembly. In addition to manufacturing, turnkey services require material procurement and warehousing and involve greater resource investments than consignment services. Other than certain test equipment and software used for internal operations, we do not design or manufacture our own proprietary products.
Established in 1979 as a Wisconsin corporation, we have approximately 9,200 full-time employees, including approximately 1,740 engineers and technologists dedicated to product development and design, test equipment development and design, and manufacturing process development and control, all of whom operate from 27 active facilities, totaling approximately 4.1 million square feet. Plexus' facilities are strategically located to support the global supply chain, as well as manufacturing and engineering needs of customers in our targeted market sectors.

Plexus maintains a website at www.plexus.com. As soon as is reasonably practical, and after we electronically file or furnish all filings to the Securities and Exchange Commission (“SEC”), we provide online copies, free of charge. These reports include: Proxy Statements, Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, and amendments to those reports. Our Code of Conduct and Business Ethics is also posted on our website. You may access these SEC reports and the Code of Conduct and Business Ethics by following the links under “Investor Relations” at our website.

Solutions

As an integrated, fully accountable partner, we deliver optimized product realization solutions that carry our customers' products from concept to end of life. Tailoring our Product Realization Value Stream to each product and program, Plexus provides unique solutions designed to meet the needs of each of our customers. As our partnerships grow and mature, we aim to engage our customers in full utilization of our Product Realization Value Stream.

Conceptualize. During the product development and conceptualization phases, new product ideas are created and evaluated with both the customer's and Plexus' engineering teams. We closely collaborate with our customers to capture their new product vision and clarify requirements. Our industrial design team attempts to analyze a product through the end user's eyes focusing on ergonomics, use case research, user interface, aesthetics and evaluation mockups. Upon completion of concept evaluations, the Plexus team prototypes what it believes to be the most promising designs, working concurrently with engineering, manufacturing and supply chain teams. Future phases ensure design intent is maintained, while realizing the final product solution.

Design. Plexus invests in the latest technology, design and automation tools to provide comprehensive design and value-engineering solutions. We engage with our customers in a variety of ways - from supporting a short-term expansion of their engineering design capabilities to collaborating on complex turn-key product design. Our disciplined approach and structure enables significant project schedule flexibility via work-sharing across our organization. Product design includes, but is not limited to, the following solutions:
Program management
Feasibility studies
Product conceptualization
Specification development for product features and functionality
Circuit design (digital, microprocessor, power, analog, radio frequency (“RF”), optical and micro-electronics)
Field programmable gate array design (“FPGA”)
Printed circuit board layout
Embedded software design
Mechanical design (thermal analysis, fluidics, robotics, plastic components, sheet metal enclosures and castings)
Test specifications development and product verification testing
Plexus also provides comprehensive value-engineering solutions, extending the product life cycle. Our value-add solutions span a wide range - engineering change-order management, cost reduction redesign, component obsolescence management, product feature expansion, test enhancement and component re-sourcing.


5

Table of Contents

Commercialize. Of all the phases in our Product Realization Value Stream, the commercialize phase carries the most influence with respect to converting ideas into viable products. Commercialization starts early in the design phase and extends through manufacturing transition, often in tandem with Design for Excellence (“DFX”). Our DFX solutions encompass a wide collection of specific design solutions including design for test, design for manufacturability/assembly and design for fabrication. The goal of DFX is to facilitate an efficient transition from engineering to manufacturing. The commercialize phase also includes prototyping, new product introduction, design for supply chain, test development and transition management. We believe our commercialization solutions provide significant value by accelerating time-to-market, reducing change activity and providing customers with a robust and enduring product.

Manufacture. Plexus applies an optimized manufacturing approach, not a one-size-fits-all model. Our scalable manufacturing solutions integrate flexibility for our customers through tailored supply chain solutions. Our focus-factory model provides a dedicated team designed to drive success while saving time and money. Focus-factories place the customer at the center of operations, executing within a culture of continuous improvement. Plexus exclusively focuses on mid-to-low volume, higher-complexity programs that range from lower-level assemblies to finished electro-mechanical products. Our manufactured products typically fall into one of the following categories in our assembly spectrum:

Printed circuit board assembly - a printed circuit board (“PCB”) populated with electronic components
Basic assembly - a sub-assembly that includes PCBs and other components
System integration - a finished product or sub-system assembly that includes more complex components such as PCBs, basic assemblies, custom engineered components, displays, optics, metering and measurement or thermal management
Mechatronic integration - more complex system integration that combines electronic controls with mechanical systems and processes such as motion control, robotics, drive systems, fluidics, hydraulics or pneumatics

System and mechatronic integration products may run larger in size than other assemblies; the products range from kiosks to finished healthcare devices and life sciences equipment to other complex electro-mechanical assemblies. These products often combine other integrated solutions we provide and may require further unique facility configurations or supply chain solutions.

Fulfill. Plexus offers fulfillment and logistics solutions to all our customers in the forms of Direct Order Fulfillment (“DOF”), Build to Order (“BTO”) and Configure to Order (“CTO”). Plexus receives DOF orders from our customers that provide the final specifications required by their end customer. Through BTO and CTO, Plexus delivers the product directly to the end customer. The DOF process relies on Enterprise Resource Planning (“ERP”) systems integrating the overall supply chain, from parts procurement through manufacturing and logistics.

Sustain. Plexus provides our customers with a range of solutions support after product launch including sustaining engineering, supply chain, and manufacturing solutions. In support of certain customers, we may provide these tailored sustaining solutions for products that we may not have originally manufactured:
Sustaining Engineering Solutions
Revitalization of existing products to extend the product lifecycle, including redesign for cost reduction, improved reliability and obsolescence mitigation
Failure and root cause analysis
Regulatory compliance surveillance and remediation
    
Sustaining Supply Chain Solutions
Reverse logistics management
Logistics optimization
Component lifecycle analysis including proactive obsolescence management
Alternate component sourcing and supplier qualification
    
Sustaining Manufacturing Solutions
Receiving and diagnostic analysis on returned goods
Warranty and non-warranty repair
Refurbishment and upgrade to outdated products
Advanced field replenishment strategies

Regulatory requirements. All Plexus manufacturing and engineering facilities are certified to a baseline Quality Management System standard per ISO9001:22008. We have developed and maintained processes and tools to meet industry-specific

6

Table of Contents

requirements at facilities, where necessary. We have capabilities to assemble finished medical devices meeting FDA Quality Systems Regulation requirements, and similar regulatory requirements in other countries.

Our manufacturing and engineering facilities are certified to the most current revision of the ISO 9001 standard. We have additional certifications and/or registrations held by certain facilities in the following regions:
 
AMER
 
APAC
 
EMEA
Medical Standard ISO 13485:2003
X
 
X
 
X
21 CFR Part 820 (FDA) (Medical)
X
 
X
 
X
CFDA (Medical)
 
 
X
 
 
JMGP accreditation
X
 
X
 
X
Environmental Standard ISO - 14001
X
 
X
 
X
Environmental Standard OSHAS 18001
 
 
X
 
X
ANSI/ESD (Electrostatic Discharge Control Program) S20.20
X
 
X
 
 
Telecommunications Standard TL 9000
X
 
X
 
 
ITAR (International Traffic and Arms Regulation) self-declaration
X
 
 
 
 
Aerospace Standard AS9100
X
 
X
 
X
NADCAP certification
X
 
X
 
X
FAR 145 certification (FAA repair station)
X
 
 
 
 
ATEX/IECEx certification
 
 
X
 
X
Customers and Market Sectors Served
We provide services to a wide variety of customers, ranging from large multinational companies to smaller emerging technology companies. During fiscal 2013, we served approximately 140 customers. We offer advanced design and production capabilities, allowing our customers to concentrate on their core competencies. Plexus helps accelerate our customers' time to market, reduce their investment in engineering and manufacturing capacity, and optimize total product cost.

Juniper Networks, Inc. (“Juniper”), which accounted for 13 percent of our net sales in fiscal 2013, 16 percent in fiscal 2012 and 17 percent in fiscal 2011, disengaged from Plexus in 2013, and we expect no further shipments to Juniper in fiscal 2014. No other customer accounted for 10 percent or more of our net sales in fiscal 2013, 2012 or 2011. The loss of any of our other major customers could have a significant negative impact on our financial results.

Net sales to our largest customers may vary from time to time depending on the size and timing of customer program commencements, terminations, delays, modifications and transitions. We generally do not obtain firm, long-term purchase commitments from our customers. Customers' forecasts can and do change as a result of changes in their end-market demand and other factors, including global economic conditions. Any material change in forecasts or orders from these major accounts, or other customers, could materially affect our results of operations. In addition, as our percentage of net sales to customers in a specific sector becomes larger relative to other sectors, we will become increasingly dependent upon the economic and business conditions affecting that sector.
Many of our large customers contract with us through independent multiple divisions, subsidiaries, production facilities or locations. We believe that in most cases our sales to any one such division, subsidiary, facility or location are independent of sales to others.
The distribution of our net sales by market sectors for fiscal 2013, 2012 and 2011 is shown in the following table:
Industry
 
 
2013
 
2012
 
2011
Networking/Communications
 
37%
 
39%
 
46%
Industrial/Commercial
 
25%
 
29%
 
24%
Healthcare/Life Sciences
 
25%
 
22%
 
21%
Defense/Security/Aerospace
 
13%
 
10%
 
9%
 
 
100%
 
100%
 
100%


7

Table of Contents

Although our current business development focus is based on our targeted market sectors, we evaluate our financial performance and allocate our resources geographically (see Note 12 in Notes to Consolidated Financial Statements regarding our reportable segments). Plexus offers a uniform array of services for customers in each market sector and we do not dedicate operational equipment, personnel, facilities or other resources to particular market sectors, nor internally track our costs and resources per market sector.

Materials and Suppliers

We typically purchase raw materials, including printed circuit boards and electronic components, from manufacturers and distributors. Under certain circumstances, we will purchase components from brokers, customers or competitors. The key electronic components we purchase include: specialized components (such as application-specific integrated circuits), semiconductors, interconnect products, electronic subassemblies (including memory modules, power supply modules and cable and wire harnesses), inductors, resistors and capacitors.

We may also purchase non-electronic components used in manufacturing and higher-level assembly. These components include molded/formed plastics, sheet metal fabrications, aluminum extrusions, robotics, motors, vision sensors, motion/actuation, fluidics, displays, die castings and various other hardware and fastener components. All components range from standard to highly customized and vary widely in terms of market availability and price.

Component shortages and subsequent allocations by suppliers are an inherent risk to the electronics industry, and have particularly been an issue for us and the industry from time to time. We discuss the causes of these shortages more fully in “Risk Factors” in Part I, Item 1A herein. We actively manage our business to try to minimize our exposure to material and component shortages.

The Plexus global supply chain management organization attempts to create strong supplier alliances and ensure a steady flow of components and products at competitive prices. Our global expediting and escalation processes track and analyze supply chain health and anticipate constraints. Plexus can often influence the selection of new product components throughout the design phase of the Product Realization Value Stream. The advanced supply chain solutions we develop in partnership with our customers improve the continuity of supply and supply chain flexibility.

New Business Development

Our new business development team is organized around our targeted market sectors and comprised of dedicated resources. A market development vice president and customer management vice president oversee and provide leadership to business development directors, customer directors, customer managers, business development, supply chain and manufacturing subject matter experts, and market sector analysts. Our sales and marketing efforts focus on targeting new customers and expanding business with existing customers. We believe our ability to provide a full range of product realization services gives Plexus a business advantage.

Competition

Plexus operates in a highly competitive market, with a goal to be best-in-class at meeting the unique needs of our customers. We provide flexible solutions, timely order fulfillment, and strong engineering, testing and production capabilities. A number of competitors may provide electronics manufacturing and engineering services similar to Plexus. Others may be more established in certain industry sectors, or have greater financial, manufacturing or marketing resources. Smaller competitors compete mainly in specific sectors and within limited geographical areas. Plexus occasionally competes with in-house capabilities of current and potential customers. Plexus maintains strong awareness and knowledge of our competitors' capabilities, in order to remain highly competitive within the broad scope of the EMS industry.

Intellectual Property

We own various service marks that we use in our business; these marks are registered in the trademark offices of the United States and other countries. Although we own certain patents, they are not currently material to our business. We do not have any material copyrights.


Information Technology


8

Table of Contents

Our integrated ERP, warehouse management and shop floor control systems serve all of our manufacturing sites, providing a core set of consistent, global business applications. This consistency augments our other management information systems, allowing us to standardize our ability to translate data from multiple production facilities into operational and financial information. The related software licenses are of a general commercial character on terms customary for these types of agreements.

Environmental Compliance

We are subject to a variety of environmental regulations relating to air emission standards and the use, storage, discharge and disposal of hazardous chemicals used during our manufacturing process. We believe that we are in compliance with all federal, state and foreign environmental laws and do not anticipate any significant expenditures in maintaining our compliance; however, there can be no assurance that violations will not occur which could have a material adverse effect on our financial results.

Social Responsibility

We are committed to social responsibility within our business and global operations. Our commitment to social responsibility extends to human rights, labor practices, the environment, worker health and safety, fair operating practices and the Company’s social impact in the communities where we operate. We consider a variety of standards for socially responsible practices, including local and federal legal requirements in the jurisdictions where we operate, the International Organization for Standardization’s “Guidance on Social Responsibility” (ISO 26000) and standards established by the Electronics Industry Citizenship Coalition.
Employees

Our employees are one of our primary strengths, and we make a considerable effort to maintain a well-qualified and motivated work force. We have been able to offer enhanced career opportunities to many of our employees. Our human resources department identifies career objectives and monitors specific skill development opportunities for employees with potential for advancement. We invest at all levels of the organization to ensure that employees are well trained. We have a policy of involvement and consultation with employees at every facility and strive for continuous improvement at all levels.
We employ approximately 9,200 full-time employees. Given the quick response times required by our customers, we seek to maintain flexibility to scale our operations as necessary to maximize efficiency. To do so we use skilled temporary labor in addition to our full-time employees. In the United Kingdom, approximately 239 of our employees are covered by union agreements. These union agreements are typically renewed at the beginning of each year, although in a few cases these agreements may last two or more years. Our employees in China, Germany, Malaysia, Mexico, Romania and the United States are not covered by union agreements. We have no history of labor disputes at any of our facilities. We believe that our employee relationships are generally positive and stable.

9

Table of Contents

ITEM 1A.
RISK FACTORS
Our net sales and operating results may vary significantly from period to period.
Our quarterly and annual results may vary significantly depending on various factors, many of which are beyond our control. These factors include:

the volume and timing of customer demand relative to our capacity
the typical short life-cycle of our customers' products
customers' operating results and business conditions
changes in our, and our customers', sales mix, as well as the volatility of these changes
variations in sales and margins among geographic regions
varying gross margins among different programs, including as a result of pricing concessions to certain customers
failures of our customers to pay amounts due to us
challenges associated with the engagement of new customers or additional work from existing customers
unanticipated customer disengagements
the timing of our expenditures in anticipation of future orders
our effectiveness in planning production and managing inventory, fixed assets and manufacturing processes
changes in cost and availability of labor and components
exchange rates and
changes in U.S. and global economic and political conditions and world events.


The majority of our net sales come from a relatively small number of customers and a limited number of market sectors; if we lose any of these customers or if there are problems in those market sectors, our net sales and operating results could decline significantly.
Net sales to our ten largest customers have represented a majority of our net sales in recent periods. Our ten largest customers accounted for approximately 55 percent of our net sales for the fiscal year ended September 28, 2013, and 60 percent of our net sales for the fiscal year ended September 29, 2012. For each of the fiscal years ended September 28, 2013 and September 29, 2012, there was one customer, Juniper, that represented 10 percent or more of our net sales. As previously announced, Juniper disengaged from us during fiscal 2013.
Our principal customers may vary from period to period, and our principal customers may not continue to purchase services from us at current levels, or at all, particularly given the volatile nature of certain programs. Especially given our discrete number of customers, significant reductions in net sales to any of these customers, the loss of major customers or our failure to make appropriate choices as to the customers we serve could seriously harm our business.
In addition, we focus our net sales to customers in only a few market sectors, and we endeavor to carefully choose those sectors. Each of these sectors is subject to macroeconomic conditions as well as trends and conditions that are sector specific. Shifts in the performance of a sector served by Plexus, as well as the economic, business and/or regulatory conditions that affect the sector, or our failure to choose appropriate sectors can particularly impact Plexus. For instance, sales in the Healthcare/Life Sciences sector are substantially affected by trends in the healthcare industry, such as government reimbursement rates and uncertainties relating to the financial health of, and pending changes in the structure of, the U.S. health care sector generally, including as a result of the Patient Protection and Affordable Care Act (the "Affordable Care Act"). Further, potential reductions in U.S. defense spending, including those due to sequestration, potential government shutdown, failure to raise the debt ceiling or similar political issues, could substantially affect our opportunities in our Defense/Security/Aerospace sector. Any weakness in the market sectors in which our customers are concentrated could affect our business and results of operations.
From time to time, our customers, including formerly significant customers, have been affected by merger and acquisition activity. While these transactions may present Plexus with opportunities to capture new business, they also create the risk that these customers will partially or completely disengage as a result of transitioning such business to other contract manufacturers or deciding to manufacture the products internally.

Plexus is a multinational corporation and operating in multiple countries exposes us to increased risks, including adverse local developments and currency risks.
We have operations in many countries; operations outside of the U.S. in the aggregate now represent a majority of our revenues. We also purchase a significant number of components manufactured in various countries. These international aspects

10

Table of Contents

of our operations, which are likely to increase over time, subject us to the following risks that could materially impact our operations and operating results:
 
economic, political or civil instability, including significant drug cartel-related violence in Mexico
transportation delays or interruptions
exchange rate fluctuations
changes in labor markets, such as government mandated wage increases, and difficulties in appropriately staffing and managing personnel in multiple cultures
compliance with laws, such as the U.S. Foreign Corrupt Practices Act and the U.K. Bribery Act, applicable to companies with global operations
significant natural disasters and other events or factors impacting local infrastructure
the effects of international political developments and
regulatory requirements and potential changes to those requirements.
We continue to monitor our risk associated with foreign currency translation and have entered into limited forward contracts to address this risk. As our international operations expand, our failure to appropriately address foreign currency transactions and/or the currency exposures associated with assets and liabilities denominated in non-functional currencies could adversely affect our consolidated financial condition, results of operations and cash flows.
In addition, changes in policies by the U.S. or other governments could negatively affect our operating results due to changes in duties, tariffs, taxes or limitations on currency or fund transfers, as well as government imposed restrictions on producing certain products in, or shipping them to, specific countries. For example, our facility in Juarez, Mexico operates under the Mexican Maquiladora ("IMMEX") program, and we expect that our new facility in Guadalajara, Mexico will qualify as well. This program provides for reduced tariffs and eased import regulations; we could be adversely affected by changes in the IMMEX program or our failure to comply with its requirements.

Our customers do not make long-term commitments and may cancel or change their production requirements.
EMS companies must respond quickly to the requirements of their customers in both design and production. We generally do not obtain firm, long-term purchase commitments from our customers, and frequently do not have visibility as to their future demand. Customers also cancel requirements, change engineering or other service requirements, change production quantities, delay production or revise their forecasts for a number of reasons that are beyond our control. The success of our customers’ products in the market and the strength of the markets themselves affect our business. Cancellations, reductions or delays by a significant customer, or by a group of customers, could seriously harm our operating results and negatively affect our working capital levels. Such cancellations, reductions or delays have occurred and may continue to occur.
In addition, we make significant decisions based on our estimates of customers’ requirements, including determining the levels of business that we will seek and accept, production schedules, component procurement commitments, working capital management, facility requirements, personnel needs and other resource requirements. The short-term nature of our customers’ commitments and the possibility of rapid changes in demand for their products reduce our ability to accurately estimate the future requirements of those customers. Since many of our operating expenses are fixed, a reduction in customer demand can harm our operating results. Moreover, since our margins vary across customers and specific programs, a reduction in demand with higher margin customers or programs will have a more significant adverse effect on our operating results.
Rapid increases in customer requirements may stress personnel and other capacity resources. We may not have sufficient resources at any given time to meet all of our customers’ demands or to meet the requirements of a specific program.

We have a complex business model, and our failure to properly manage that model could affect our operations and financial results.
Our business model focuses on products and services in the mid-to-lower-volume, higher-complexity segment of the EMS market. Our customers’ products typically require significant production and supply-chain flexibility, in some cases necessitating optimized demand-pull-based manufacturing and supply chain solutions across an integrated global platform. The products we manufacture are also typically complex, highly regulated, and require complicated configuration management and direct order fulfillment capabilities to global end customers. Relative to many of our competitors that manufacture more standardized products with larger production runs, our business model requires a greater degree of attention, flexibility and resources. These resources include working capital, management and technical personnel, and the development and maintenance of systems and procedures to manage diverse manufacturing, regulatory and service requirements for multiple programs of varying sizes simultaneously, including in multiple locations. We also depend on bringing new customers and

11

Table of Contents

programs online and on transitioning production for new customers and programs, which creates added complexities related to managing the start-up risks of such projects.
The complexity of our service model often results in complex and challenging contractual obligations as well as commitments from us to our customers. If we fail to meet those obligations, it could result in claims against us and/or affect our reputation and our ability to obtain future business, as well as impair our ability to enforce our rights (including those related to payment) under those contracts.
If we fail to effectively manage or execute our business model, we may lose customer confidence and our reputation may suffer. The Company’s reputation is the foundation of our relationships with key stakeholders. If we are unable to effectively manage real or perceived issues, which could negatively impact sentiments toward the Company, our ability to maintain or expand business opportunities could be impaired and our financial results could suffer on a going-forward basis.

Challenges associated with the engagement of new customers or programs could affect our operations and financial results.
Our engagement with new customers, as well as the addition of new work for existing customers, can present challenges in addition to opportunities. We must initially determine whether it would be in our interests from a business perspective to pursue a particular potential new customer or program, including evaluating the customer’s and/or program’s fit with our value proposition as well as its potential end-market success. If we make the decision to proceed, we need to ensure that our terms of engagement, including our pricing and other contractual provisions, appropriately reflect the anticipated costs, risks, and rewards of an opportunity. The failure to make prudent engagement decisions and/or to establish appropriate terms of engagement could adversely affect our profitability and margins.
Also, there are inherent risks associated with the timing and ultimate realization of a new program’s anticipated revenue; these factors can sometimes extend for a significant period. Some new programs require us to devote significant capital and personnel resources to new technologies and competencies; in addition, as a result of production startup costs, new programs are inherently less efficient in their earlier phases than mature programs. We may not meet customer expectations, which could damage our relationships with the affected customers and impact our ability to deliver conforming product on a timely basis. Further, the success of new programs may depend heavily on factors such as product reliability, market acceptance, regulatory approvals and/or economic conditions. The failure of a new program to meet expectations on these factors, or our inability to effectively execute on a new program’s requirements, could result in lost financial opportunities and adversely affect our results of operations.

Our manufacturing services involve inventory risk.
Most of our contract manufacturing services are provided on a turnkey basis, under which we purchase some, or all, of the required materials and components based on customer forecasts and/or orders. Suppliers may require us to purchase materials and components in minimum order quantities that may exceed customer requirements. A customer’s cancellation, delay or reduction of forecasts or orders can also result in excess inventory or additional expense to us. Engineering changes by a customer may result in obsolete materials or components. While we attempt to cancel, return or otherwise mitigate excess and obsolete inventory and require customers to reimburse us for these items, we may not actually be reimbursed timely or be able to collect on these obligations. Excess or obsolete inventory, or other failures to manage our working capital, could adversely affect our operating results, including our return on invested capital.
In addition, we provide managed inventory programs for some of our customers under which we hold and manage finished goods or work-in-process inventories. These managed inventory programs result in higher inventory levels, further reduce our inventory turns and increase our financial exposure with such customers. Even though our customers generally have contractual obligations to purchase such inventories from us, we remain subject to the risk of enforcing those obligations.

Failure to manage periods of growth or contraction, if any, may seriously harm our business.
Our industry frequently sees periods of expansion and contraction to adjust to customers’ needs and market demands. Plexus regularly contends with these issues and must carefully manage its business to meet customer and market requirements. If we fail to manage these growth and contraction decisions effectively, we can find ourselves with either excess or insufficient resources and our business, as well as our profitability, may suffer.
Expansion, including the transfer of operations to larger facilities, can inherently include additional costs and start-up inefficiencies. During fiscal 2013, we opened a new manufacturing facility in China (Xiamen) and a replacement facility in Romania (Oradea). In the first quarter of fiscal 2014, we opened a new manufacturing facility in the U.S. (Neenah, Wisconsin), which is replacing two existing leased facilities and one owned facility. In addition, in fiscal 2013, we entered into a lease for a

12

Table of Contents

new facility in Guadalajara, Mexico. Construction of the new facility is expected to be complete in the second half of fiscal 2014. If we are unable to effectively manage our currently anticipated growth, or related anticipated net sales are not realized, our operating results could be adversely affected. In addition, we may expand our operations in new geographical areas where currently we do not operate. Other risks of current or future expansion include:
 
the inability to successfully integrate additional facilities or incremental capacity and to realize anticipated synergies, economies of scale or other value
challenges faced as a result of transitioning programs
incurrence of restructuring or other charges that may not have their intended effects
additional fixed or other costs, or selling, general and administrative ("SG&A") expenses, which may not be fully absorbed by new business
a reduction of our return on invested capital, including as a result of excess inventory or excess capacity at new facilities
difficulties in the timing of expansions, including delays in the implementation of construction and manufacturing plans
diversion of management’s attention from other business areas during the planning and implementation of expansions
strain placed on our operational, financial and other systems and resources and
inability to locate sufficient customers, employees or management talent to support the expansion.

Periods of contraction or reduced net sales, or other factors affecting particular sites, create other challenges. We must determine whether facilities remain viable, whether staffing levels need to be reduced, and how to respond to changing levels of customer demand. While maintaining excess capacity or higher levels of employment entail short-term costs, reductions in capacity and/or employment could impair our ability to respond to market improvements or to maintain customer relationships. Our decisions to reduce costs and capacity can affect our short-term and long-term results. When we make decisions to reduce capacity or to close facilities, we frequently incur restructuring charges.
In addition, to meet our customers’ needs, particularly when the production requirements of certain products is site-specific, or to achieve increased efficiencies, we sometimes require additional capacity in one location while reducing capacity in another. Since customers’ needs and market conditions can vary and change rapidly, we may find ourselves in a situation where we simultaneously experience the effects of contraction in one location and expansion in another location. We may also encounter situations where our lack of a physical presence in certain locations may limit or foreclose opportunities.

Changes in tax laws, potential tax disputes, negative or unforeseen tax consequences and/or further developments affecting our deferred tax assets could affect our results.
The Company has been granted a tax holiday for its Malaysian subsidiary. This tax holiday expires in 2024 and is subject to certain conditions with which the Company expects to comply and would risk adverse tax consequences if we do not.
Given the scope of our international operations and our international tax arrangements, proposed changes to the manner in which U.S. based multinational companies are taxed in the U.S. could have a material impact on our operating results and competitiveness. In addition, other recently adopted or potential changes to tax laws in the other jurisdictions in which we operate could also affect our results.
Plexus is eligible for up to $15 million in Wisconsin state tax credits in connection with our new manufacturing facility in Neenah, if we meet certain requirements related to, among other matters, job creation and retention, employee training and capital investment. If we do not comply with these requirements, we may not be able to realize all, or any, of these tax credits. As of September 28, 2013, approximately $4.7 million has been recognized as a miscellaneous receivable related to the credits.
The Company reviews the probability of the realization of our net deferred tax assets each period based on forecasts of taxable income in both the U.S. and foreign jurisdictions. This review uses historical results, projected future operating results based upon approved business plans, eligible carryforward periods, tax planning opportunities and other relevant considerations. Adverse changes in the profitability and financial outlook in the U.S. or foreign jurisdictions may require the creation of an additional valuation allowance to reduce our net deferred tax assets. Such changes could result in material non-cash expenses in the period in which the changes are made.

We and our customers are subject to increasingly extensive government regulations and industry standards, and the impact of certain future regulations remains uncertain; failure to comply with such regulations and standards could have an adverse affect on our business, customer relationships, reputation and profitability.

13

Table of Contents

We are subject to extensive government regulation and industry standards relating to the products we design and manufacture as well as how we conduct our business, including regulations and standards relating to labor and employment practices, workplace health and safety, the environment, sourcing and import/export practices, the market sectors we support and many other facets of our operations. The regulatory climate in the U.S. and other countries has become increasingly complex and fragmented, and regulatory activity has increased in recent periods. Failure or noncompliance with such regulations or standards could have an adverse effect on our reputation, customer relationships, profitability and results of operations.
As a publicly-held company, we are subject to increasingly stringent laws, regulation and other requirements, including those resulting from the Sarbanes-Oxley Act and the Dodd-Frank Wall Street Reform and Consumer Protection Act, affecting, among other areas, our accounting, internal controls, corporate governance practices, securities disclosures and reporting. For example, in fiscal 2013, the SEC adopted disclosure requirements related to the use of specified "conflict" minerals that are necessary to the functionality or production of products manufactured, or contracted to be manufactured, by publicly-held companies. Compliance with such requirements could increase costs and affect the manufacturing and sale of our products.
Governments worldwide are becoming increasingly aggressive in enforcing and adopting anti-corruption laws. The U.S. Foreign Corrupt Practices Act and the U.K. Bribery Act, among others, apply to us and our operations.
The Affordable Care Act significantly affects the provision of both health care services and benefits in the United States and is expected to impact our cost of providing our employees and retirees with health insurance and/or benefits, and may also impact various other aspects of our business.
Our Healthcare/Life Sciences sector is subject to statutes and regulations covering the design, development, testing, manufacturing and labeling of medical devices and the reporting of certain information regarding their safety, including Food and Drug Administration ("FDA") regulations and similar regulations in other countries. Failure to comply with these regulations can result in, among other things, fines, injunctions, civil penalties, criminal prosecution, recall or seizure of devices, or total or partial suspension of production.
We also design and manufacture products for customers in the defense and aerospace industries. Companies that design and manufacture products for these industries face significant regulation by the Department of Defense, Department of State, Federal Aviation Authority, and other governmental agencies in the U.S. as well as in other countries, and also under the Federal Acquisition Regulation.
In addition, whenever we pursue business in new sectors and subsectors, or our customers pursue new technologies or markets, we need to navigate the potentially heavy regulatory and legislative burdens of such sectors, technologies or markets.
The regulatory climate can itself affect the demand for our services. For example, government reimbursement rates and other regulations, as well as the financial health of health care providers, and pending changes in how health care in the U.S. is structured, including as a result of the Affordable Care Act, and how medical devices are taxed, could affect the willingness and ability of end customers to purchase the products of our customers in this sector as well as impact our margins.
Our customers are also required to comply with various government regulations, legal requirements and industry standards, including many of the industry-specific regulations discussed above. Our customers' failure to comply could affect their businesses, which in turn would affect our sales to them. In addition, if our customers are required by regulation or other requirements to make changes in their product lines, these changes could significantly disrupt particular programs for these customers and create inefficiencies in our business.

A failure to comply with customer-driven policies and standards, and third party certification requirements, including those related to social responsibility, could adversely affect our business.
In addition to government regulations and industry standards, our customers may require us to comply with their own social responsibility, conflict minerals or other business policies or standards, which may be more restrictive than current laws and regulations as well as our pre-existing policies, before they commence, or continue, doing business with us. Such policies or standards may be customer-driven, established by the industry sectors in which we operate or imposed by third party organizations. For example, certain of these policies or standards may relate to overseas labor and may require us to comply with standards or policies to which we would not otherwise be subject. As a result of customer requirements and the need to enhance our competitive position, we may seek to obtain and maintain various certifications from third parties relating to our quality systems and standards.
Our compliance with these policies, standards and third party certification requirements could be costly, and our failure to comply could adversely affect our operations, customer relationships, reputation and profitability.

An inability to successfully manage the procurement, development, implementation or execution of information systems, or to adequately maintain these systems and their security, as well as to protect data and other confidential information, may adversely affect our business and reputation.

14

Table of Contents

As a global company with a complex business model, we heavily depend on our information systems to support our customers’ requirements and to successfully manage our business. Any inability to successfully manage the procurement, development, implementation, execution or maintenance of our information systems, including matters related to system and data security, privacy, reliability, compliance, performance and access, as well as any inability of these systems to fulfill their intended purpose within our business, could have an adverse effect on our business.
In the ordinary course of business, we collect and store sensitive data and information, including our proprietary and regulated business information and that of our customers, suppliers and business partners, as well as personally identifiable information about our employees. Our information systems, like those of other companies, are susceptible to outages due to natural disasters, power loss, telecommunications failures, viruses, industrial espionage, break-ins and similar events, or breaches of security. We have taken steps to maintain adequate data security and address these risks and uncertainties by implementing security technologies, internal controls, network and data center resiliency and recovery processes. However, any operational failure or breach of security from increasingly sophisticated cyber threats could lead to the loss or disclosure of both our and our customers’ financial, product and other confidential information, result in regulatory actions and have a material adverse effect on our business and reputation.

If we are unable to maintain our engineering, technological and manufacturing process expertise, our results may be adversely affected.
The markets for our manufacturing, engineering and other services are characterized by rapidly changing technology and evolving process developments. Our internal processes are also subject to these factors. The continued success of our business will depend upon our continued ability to:
 
retain our qualified engineering and technical personnel, and attract additional such personnel
maintain and enhance our technological capabilities
choose and maintain appropriate technological and service capabilities
successfully manage the implementation and execution of information systems
develop and market manufacturing services which meet changing customer needs and
successfully anticipate, or respond to, technological changes on a cost-effective and timely basis.
Although we believe that our operations utilize the assembly and testing technologies, equipment and processes that are currently required by our customers, we cannot be certain that we will develop the capabilities required by our customers in the future. The emergence of new technology, industry standards or customer requirements may render our equipment, inventory or processes obsolete or noncompetitive. In addition, we may have to acquire new design, assembly and testing technologies and equipment to remain competitive. The acquisition and implementation of new technologies and equipment may require significant expense or capital investment that could reduce our liquidity and negatively affect our operating results. Our failure to anticipate and adapt to our customers’ changing technological needs and requirements, and our need to maintain our personnel and other resources during times of fluctuating demand, could have an adverse effect on our business.

Start-up costs and inefficiencies related to new, recent or transferred programs can adversely affect our operating results.
In the current environment, our revenue growth has been heavily biased toward ramping new program wins as compared to end-market growth of mature programs. The management of resources in connection with the establishment of new or recent programs and customer relationships, as well as program transfers between facilities, and the need to estimate required resources in advance of production can adversely affect our gross and operating margins and level of working capital. These factors are particularly evident in the early stages of the life-cycle of new products and programs, which lack a track record of order volume and timing as well as production efficiencies in the early stages. We are managing a number of new programs at any given time; therefore, we are exposed to these factors in varying magnitudes. In addition, if any of these programs or customer relationships were terminated, our operating results could worsen, particularly in the short term.
The effects of these start-up costs and inefficiencies can also occur when we transfer programs between locations. We conduct these transfers on a regular basis to meet customer needs, seek long-term efficiencies or respond to market conditions, as well as due to facility openings and closures. Although we try to minimize the potential losses arising from transitioning customer programs between Plexus facilities, there are inherent risks that such transitions can result in operational inefficiencies and the disruption of programs and customer relationships.
While these factors tend to affect new, recent or transferred programs, they can also impact more mature, or maturing programs and customer relationships, especially programs where end-market demand can be somewhat volatile.


15

Table of Contents

There may be problems with the products we design or manufacture that could result in liability claims against us and reduced demand for our services.
The products that we design and/or manufacture may be subject to liability or claims in the event that defects are discovered or alleged. We design and manufacture products to our customers’ specifications, many of which are highly complex, and produce products for industries, such as health care, defense and aerospace, that tend to have higher risk profiles. Despite our quality control and quality assurance efforts, problems may occur, or may be alleged, in the design and/or manufacturing of these products, including as a result of business continuity issues. Whether or not we are responsible, problems in the products we manufacture, whether real or alleged, whether caused by faulty customer specifications, the design or manufacturing processes or a component defect, may result in delayed shipments to customers and/or reduced or canceled customer orders. If these problems were to occur in large quantities or too frequently, our business reputation may also be tarnished. In addition, problems may result in liability claims against us, whether or not we are responsible. These potential claims may include damages for the recall of a product and/or injury to person or property.
Even if customers or third parties, such as component suppliers, are responsible for defects, they may not, or may not be able to, assume responsibility for any such costs or required payments to us. While we seek to insure against many of these risks, insurance coverage may be inadequate, not cost effective or unavailable, either in general or for particular types of products or issues. We occasionally incur costs defending claims, and any such disputes could affect our business relationships.

Intellectual property infringement claims against our customers or us could harm our business.
Our design and manufacturing services and the products offered by our customers involve the creation and use of intellectual property rights, which subject us and our customers to the risk of claims of intellectual property infringement from third parties. In addition, our customers may require that we indemnify them against the risk of intellectual property infringement. If any claims are brought against us or our customers for infringement, whether or not these have merit, we could be required to expend significant resources in defense of those claims. In the event of an infringement claim, we may be required to spend a significant amount of money to develop non-infringing alternatives or obtain licenses. We may not be successful in developing alternatives or obtaining licenses on reasonable terms or at all. Infringement by our customers could cause them to discontinue production of some of their products, potentially with little or no notice, which may reduce our net sales to them and disrupt our production.
Additionally, if third parties on whom we rely for products or services, such as component suppliers, are responsible for an infringement (including through the supply of counterfeit parts), we may or may not be able to hold them responsible and we may incur costs in defending claims or providing remedies. Such infringements may also cause our customers to abruptly discontinue selling the impacted products, which would adversely affect our net sales of those products, and could affect our customer relationships more broadly. Similarly, claims affecting our suppliers could cause those suppliers to discontinue selling materials and components upon which we rely.

Our products are for end markets that require technologically advanced products with relatively short life-cycles.
Factors affecting the technology-dependent end markets that we serve, in particular short product life-cycles, could seriously affect our customers and, as a result, Plexus. These factors include:
the inability of our customers to adapt to rapidly changing technology and evolving industry standards that result in short product life-cycles
the inability of our customers to develop and market their products, some of which are new and untested and
the potential that our customers’ products may become obsolete or the failure of our customers’ products to gain widespread commercial acceptance.
Even if our customers successfully respond to these market challenges, their responses, including any consequential changes we must make in our business relationships with them and our production for them, can affect our production cycles, inventory management and results of operations.

Increased competition may result in reduced demand or reduced prices for our services.
The EMS industry is highly competitive and has become more so as a result of economic challenges affecting the industry and the economy as a whole. We compete against numerous EMS providers with global operations, as well as those which operate on only a local or regional basis. In addition, current and prospective customers continually evaluate the merits of manufacturing products internally and may choose to manufacture products themselves rather than outsource that process. Consolidations and other changes in the EMS industry result in a changing competitive landscape.

16

Table of Contents

Some of our competitors have a larger geographic footprint than we do, in addition to substantially greater managerial, manufacturing, engineering, technical, financial, systems, sales and marketing resources than ourselves. These competitors may:
respond more quickly to new or emerging technologies
have greater name recognition, critical mass and geographic and market presence
be better able to take advantage of acquisition opportunities
adapt more quickly to changes in customer requirements
devote greater resources to the development, promotion and sale of their services and
be better positioned to compete on price for their services.
We may operate at a cost disadvantage compared to other EMS providers that have lower internal cost structures or greater direct buying power with component suppliers, distributors and raw material suppliers. Our manufacturing processes are generally not subject to significant proprietary protection, and companies with greater resources or a greater market presence may enter our market or become increasingly competitive. Increased competition could result in significant price reductions, reduced sales and margins, or loss of market share.
We may experience raw material and component shortages and price fluctuations.
We do not have any long-term supply agreements. At various times we have experienced raw material and component shortages due to supplier capacity constraints or their failure to deliver. Periodic shortages may occur in the future. Such constraints can also be caused by world events, such as government policies, terrorism, armed conflict, natural disasters, economic recession and other localized events. We rely on a limited number of suppliers for many of the raw materials and components used in the assembly process and, in some cases, may be required to use suppliers that are the sole provider of a particular raw material or component. Such suppliers may encounter quality problems, labor disputes, financial difficulties or business continuity issues that could preclude them from delivering raw materials or components timely or at all. Some suppliers have ceased doing business due to economic or other circumstances, and more may do so in the future. Supply shortages and delays in deliveries of raw materials or components have in some cases resulted in delayed production of assemblies, which have increased our inventory levels and adversely affected our operating results in certain periods. An inability to obtain sufficient inventory on a timely basis could also harm relationships with our customers.
In addition, raw materials and components that are delivered to us may not meet our specifications or other quality criteria. Certain materials provided to us may be counterfeit or violate the intellectual property rights of others. The need to obtain replacement materials and parts may negatively affect our manufacturing operations. The inadvertent use of any such parts or products may also give rise to liability claims.
Raw material and component supply shortages and delays in deliveries can also result in increased pricing. While many of our customers permit quarterly or other periodic adjustments to pricing based on changes in raw material or component prices and other factors, we may bear the risk of price increases that occur between any such repricing or, if such repricing is not permitted, during the balance of the term of the particular customer contract. Conversely, as a result of our pricing strategies and practices, raw material and component price reductions have contributed positively to our operating results in the past. Our inability to continue to benefit from such reductions in the future could adversely affect our operating results.
We depend on our workforce, including certain key personnel, and the loss of key personnel or other personnel disruptions, including the inability to hire and retain sufficient personnel, may harm our business.
Our success depends in large part on the continued services of our key technical and management personnel, and on our ability to attract, develop and retain qualified employees, particularly highly skilled design, process and test engineers involved in the development of new products and processes and the manufacture of products. The competition for these individuals is significant, and the loss of key employees could harm our business.
From time to time, there are changes and developments, such as retirements, disability, death and other terminations of service that affect our executive officers and other key employees. Transitions of responsibilities among officers and key employees, particularly those that are unplanned, inherently can cause disruptions to our business and operations, which could have an effect on our results.

We also depend on good relationships with our workforce generally. Any disruption in our relationships with our personnel, including as a result of potential union organizing activities, work actions or other labor issues, could substantially affect our operations and results.
In addition, when we expand operations in either existing areas or new locations, including internationally, we need to attract and retain the services of sufficient qualified personnel to conduct those operations. If we fail to retain and maintain sufficient qualified personnel, the operations at those locations, and consequently our financial results, could be adversely affected. In

17

Table of Contents

new or existing facilities we may be subject to local labor practices or union activities, wage pressure and changing wage requirements, increasing health care costs, differing employment laws and regulations in various countries, local competition for employees as well as high turnover, and other issues affecting our workforce, all of which could affect operations at particular locations, which also could have adverse effects on our operational results.

Natural disasters, breaches of security and other events outside our control, and the ineffective management of such events, may harm our business.
Some of our facilities are located in areas that may be impacted by natural disasters, including tornadoes, hurricanes, earthquakes, water shortages, tsunamis and floods. All facilities are subject to other natural or man-made disasters such as those related to global climate change, fires, acts of terrorism, breaches of security, theft or espionage, and failures of utilities. If such an event was to occur, our business could be harmed due to the event itself or due to our inability to effectively manage the effects of the particular event. Potential harms include the loss of business continuity, the loss of business data and damage to infrastructure.
In addition, some of our facilities possess certifications necessary to work on specialized products that our other locations lack. If work is disrupted at one of these facilities, it may be impractical or we may be unable to transfer such specialized work to another facility without significant costs and delays. Thus, any disruption in operations at a facility possessing specialized certifications could adversely affect our ability to provide products and services to our customers, and thus negatively affect our relationships and financial results.
Although we have implemented policies and procedures with respect to physical security, we remain at risk of unauthorized access to our facilities and the possible unauthorized use or theft of inventory, information or other physical assets. If unauthorized persons gain physical access to our facilities, or our physical assets or information are stolen or used in an unauthorized manner (whether through outside theft or industrial espionage), we could be subject to, among other consequences, negative publicity, governmental inquiry and oversight, loss of government contracts, litigation by affected parties and/or other future financial obligations related to the loss, misuse or theft of our or our customers' data, inventory or physical assets, any of which could have a material adverse effect on our reputation and results of operations.

We have increased our borrowings, and we may fail to secure or maintain necessary financing.
We have increased our borrowings in recent years. However, we cannot be certain that our existing credit facilities will provide all of the financing capacity that we will need in the future or that we will be able to change the credit facilities or revise covenants, if necessary, to accommodate changes or developments in our business and operations. In addition, it is possible that counterparties to our financial agreements, including our credit agreement and our interest rate swap agreements, may not be willing or able to meet their obligations, either due to instability in the global financial markets or otherwise.
Our future success may depend on our ability to obtain additional financing and capital to support possible future growth and future initiatives. We may seek to raise capital by issuing additional common stock, other equity securities or debt securities, modifying our existing credit facilities or obtaining new credit facilities or a combination of these methods.
We may not be able to obtain capital when we want or need it, and capital may not be available on satisfactory terms. If we issue additional equity securities or convertible securities to raise capital, it may be dilutive to shareholders’ ownership interests. Furthermore, any additional financing may have terms and conditions that adversely affect our business, such as restrictive financial or operating covenants, and our ability to meet any financing covenants will largely depend on our financial performance, which in turn will be subject to general economic conditions and financial, business and other factors.

We may fail to successfully complete future acquisitions, as well as strategic arrangements, and may not successfully integrate acquired businesses or recognize the anticipated benefits, which could adversely affect our operating results.
We have previously grown, in part, through acquisitions and strategic arrangements. If we were to pursue future growth through acquisitions, this would involve significant risks that could have a material adverse effect on us. These risks include:

Operating risks, such as:
the inability to integrate successfully our acquired operations’ businesses, systems and personnel
the inability to realize anticipated synergies, economies of scale or other value
the difficulties in scaling up production and coordinating management of operations at new sites
the strain placed on our personnel, systems and resources
the possible modification or termination of an acquired business’ customer programs, including the loss of customers and the cancellation of current or anticipated programs and

18

Table of Contents

the loss of key employees of acquired businesses.
Financial risks, such as:
the use of cash resources, or incurrence of additional debt and related interest expense
the dilutive effect of the issuance of additional equity securities
the inability to achieve expected operating margins to offset the increased fixed costs associated with acquisitions, and/or inability to increase margins of acquired businesses to our desired levels
the incurrence of large write-offs or write-downs
the impairment of goodwill and other intangible assets and
the unforeseen liabilities of the acquired businesses.

The price of our common stock has been and may continue to be volatile.
Our stock price has fluctuated significantly in recent periods. The price of our common stock may fluctuate in response to a number of events and factors relating to us, our competitors and the market for our services, many of which are beyond our control.
In addition, the stock market in general, and share prices for technology companies in particular, have from time to time experienced extreme volatility, including weakness, that sometimes has been unrelated to the operating performance of these companies. These broad market and industry fluctuations, and concerns affecting the economy generally, may adversely affect the market price of our common stock, regardless of our operating results.
Among other things, volatility and weakness in our stock price could mean that investors may not be able to sell their shares at or above the prices that they paid. Volatility and weakness could also impair our ability in the future to offer common stock or convertible securities as a source of additional capital and/or as consideration in the acquisition of other businesses.
ITEM 1B.
UNRESOLVED SEC STAFF COMMENTS
None.


19

Table of Contents

ITEM 2.
PROPERTIES
Our facilities comprise an integrated network of engineering and manufacturing centers with our corporate headquarters located in Neenah, Wisconsin. We own or lease facilities with approximately 3.9 million square feet of capacity. This includes approximately 2.1 million square feet in the Americas region (“AMER”) (of which 0.3 million square feet will close in fiscal 2014), approximately 1.4 million square feet in the Asia-Pacific region (“APAC”) and approximately 0.4 million square feet in the Europe, Middle East, and Africa region (“EMEA”). Approximately 0.2 million square feet of this capacity is subleased. Our facilities as of September 28, 2013, are described in the following table:
Location
 
Type
 
Size (sq. ft.)
 
Owned/Leased
Penang, Malaysia (1)
 
Manufacturing/Engineering
 
1,048,000

 
Owned    
Neenah, Wisconsin (2)
 
Manufacturing
 
418,000

 
Owned    
Oradea, Romania (3)
 
Manufacturing/Office
 
296,000

 
Owned    
Neenah, Wisconsin (1,2,4)
 
Manufacturing
 
277,000

 
Leased    
Appleton, Wisconsin (1,2)
 
Manufacturing
 
272,000

 
Owned    
Nampa, Idaho
 
Manufacturing
 
216,000

 
Owned    
Juarez, Mexico
 
Manufacturing
 
210,000

 
Leased    
Xiamen, China (1,5)
 
Manufacturing/Office
 
193,000

 
Leased    
Buffalo Grove, Illinois (1)
 
Manufacturing/Warehouse
 
163,000

 
Leased    
Hangzhou, China
 
Manufacturing
 
117,000

 
Leased    
Neenah, Wisconsin
 
Engineering/Office
 
105,000

 
Owned    
Neenah, Wisconsin
 
Global Headquarters
 
104,000

 
Owned    
Livingston, Scotland (6)
 
Manufacturing/Engineering
 
62,000

 
Leased    
Kelso, Scotland
 
Manufacturing
 
57,000

 
Owned    
Fremont, California
 
Manufacturing
 
46,000

 
Leased    
Raleigh, North Carolina
 
Engineering
 
25,000

 
Leased    
Louisville, Colorado
 
Engineering
 
24,000

 
Leased    
Darmstadt, Germany
 
Engineering
 
16,000

 
Leased    
San Diego, California (7)
 
Inactive/Other
 
198,000

 
Leased    
 
(1)
Includes more than one building.
(2)
Construction of the Company's new facility in Neenah, Wisconsin was completed in fiscal 2013. This facility will replace one of the two facilities owned by the Company in Appleton, Wisconsin (67,000 square feet) and two facilities leased by the Company in Neenah, Wisconsin (comprising a total of 277,000 square feet). Consolidation of these three facilities into the new facility is expected to be complete in the first half of fiscal 2014.
(3)
This facility opened in fiscal 2013 and replaced the previously leased buildings.
(4)
Lease runs through August 2014. The Company will exit the lease upon its expiration and complete the transition into the new facility owned by the Company in Neenah, Wisconsin in fiscal 2014.
(5)
Lease for the office portion of the facility runs through April 2014.
(6)
Lease for a combined manufacturing and engineering facility was signed in February 2013 and runs through February 2018.
(7)
This building is subleased and no longer used in operations.
In fiscal 2013, the Company did not renew the lease for its prior warehouse in Neenah, Wisconsin (39,000 square feet).
Construction of a new 265,000 square foot manufacturing facility in Guadalajara, Mexico began in late fiscal 2013 and is expected to be completed during the second half of fiscal 2014.  The Company entered into an agreement to lease the Guadalajara facility in the fourth quarter of fiscal 2013 that runs through fiscal 2024.  



20

Table of Contents

ITEM 3.
LEGAL PROCEEDINGS
The Company is party to certain lawsuits and legal proceedings in the ordinary course of business. Management does not believe that these proceedings, individually or in the aggregate, will have a material adverse effect on the Company’s consolidated financial position, results of operations or cash flows.

ITEM 4.
MINE SAFETY DISCLOSURES

Not applicable.
EXECUTIVE OFFICERS OF THE REGISTRANT
The following table sets forth our executive officers, their ages and the positions currently held by each person:
Name
 
Age
 
Position
Dean A. Foate
 
55
 
Chairman, President and Chief Executive Officer
Ginger M. Jones
 
49
 
Senior Vice President and Chief Financial Officer
Todd P. Kelsey
 
48
 
Executive Vice President and Chief Operating Officer
Steven J. Frisch
 
47
 
Executive Vice President - Global Customer Services
Yong Jin Lim
 
53
 
Regional President - Plexus APAC
Angelo M. Ninivaggi
 
46
 
Senior Vice President, Chief Administrative Officer, General Counsel and Secretary
Michael T. Verstegen
 
55
 
Senior Vice President - Global Market Development
Dean A. Foate joined Plexus in 1984 and has served as Chairman since February 2013, as President and Chief Executive Officer since 2002, and as a director since 2000.
Ginger M. Jones has served as Plexus’ Vice President and Chief Financial Officer since 2007, and became a Senior Vice President in 2011.
Todd P. Kelsey joined Plexus in 1994 and has served as Executive Vice President and Chief Operating Officer since June 2013. Previously, Mr. Kelsey served as Executive Vice President – Global Customer Services since 2011 and as Senior Vice President prior thereto.
Steven J. Frisch joined Plexus in 1990 and has served as Executive Vice President - Global Customer Services since June 2013. Previously, Mr. Frisch was Regional President – Plexus EMEA from 2010 to 2013. Mr. Frisch also served as Senior Vice President – Global Engineering Solutions from 2007 to 2013.
Yong Jin Lim joined Plexus in 2002 and has served as Regional President – Plexus APAC since 2007.
Angelo M. Ninivaggi joined Plexus in 2002 and has served as Chief Administrative Officer since August 2013. Mr. Ninivaggi has also served as Vice President, General Counsel and Secretary since 2006 and was named Senior Vice President in 2011. Mr. Ninivaggi also served as Corporate Compliance Officer from 2007 to August 2013.
Michael T. Verstegen joined Plexus in 1983 and has served as Senior Vice President, Global Market Development since 2006.

21

Table of Contents

PART II
ITEM 5.
MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
Market Price per Share
For the fiscal years ended September 28, 2013 and September 29, 2012, the Company’s common stock has traded on the NASDAQ Stock Market, in the NASDAQ Global Select Market tier. The price information below represents high and low sale prices of our common stock for each quarterly period.
Fiscal Year Ended September 28, 2013
 
Fiscal Year Ended September 29, 2012
 
 
  High
 
  Low
 
 
 
  High
 
    Low
First Quarter
 
$31.38
 
$19.63
 
First Quarter
 
$29.03
 
$21.06
Second Quarter
 
$27.36
 
$23.45
 
Second Quarter
 
$38.50
 
$27.03
Third Quarter
 
$30.67
 
$23.71
 
Third Quarter
 
$35.48
 
$26.69
Fourth Quarter
 
$37.29
 
$29.57
 
Fourth Quarter
 
$34.24
 
$26.40
Performance Graph
The following graph compares the cumulative total return on Plexus common stock with the NASDAQ Stock Market Index for U.S. Companies and the NASDAQ Stock Market Index for Electronic Components Companies, both of which include Plexus. The values on the graph show the relative performance of an investment of $100 made on September 27, 2008, in Plexus common stock and in each of the indices as of the last business day of the respective fiscal year.

Comparison of Cumulative Total Return
 
 
2008
 
2009
 
2010
 
2011
 
2012
 
2013
Plexus
 
$
100

 
$
117

 
$
142

 
$
104

 
$
140

 
$
170

NASDAQ-US
 
100

 
94

 
110

 
115

 
151

 
186

NASDAQ-Electronics
 
100

 
98

 
105

 
94

 
105

 
129


22

Table of Contents

Shareholders of Record; Dividends
As of November 18, 2013, there were 561 shareholders of record. We have not paid any cash dividends in the past. We currently anticipate that the majority of earnings in the foreseeable future will be retained to finance the development of our business and our authorized share repurchase. However, the Company evaluates from time to time potential uses of excess cash, which in the future may include additional share repurchases, a special dividend or recurring dividends. See also Part II, Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Liquidity and Capital Resources”, for a discussion of the Company’s intentions regarding dividends, and loan covenants which could restrict dividend payments.

Issuer Purchases of Equity Securities
The following table provides the specified information about the repurchases of shares by the Company during the three months ended September 28, 2013:
Period
Total number of shares purchased
 
Average price paid per share
 
Total number of shares purchased as part of publicly announced plans or programs
 
Maximum approximate dollar value of shares that may yet be purchased under the plans or programs*
June 30, 2013 to July 27, 2013
132,909

 
$
30.88

 
132,909

 
$
9,849,895

July 28, 2013 to August 24, 2013
125,493

 
34.82

 
125,493

 
$
5,480,655

August 25, 2013 to September 28, 2013
152,670

 
34.97

 
152,670

 
$

 
411,072

 
$
33.60

 
411,072

 
 

* On October 23, 2012, the Board of Directors approved a stock repurchase program under which the Company was authorized to repurchase up to $50 million of its common stock. This program was completed in the fourth quarter of fiscal 2013. During fiscal 2013, the Company repurchased 1,821,698 shares under this program for approximately $49.9 million, at an average price of $27.37 per share. These shares were recorded as treasury stock.

On August 19, 2013, the Board of Directors approved a stock repurchase program under which the Company is authorized to repurchase up to $30 million of its common stock in fiscal 2014. Accordingly, since this program began subsequent to September 28, 2013, and no shares were purchased under this authorization in fiscal 2013, the $30 million is excluded from the table above.

23

Table of Contents

ITEM 6.
SELECTED FINANCIAL DATA
Financial Highlights (dollars in thousands, except per share amounts)
 
 
 
Fiscal Years Ended
 
Income Statement Data
 
September 28,
2013
 
September 29,
2012
 
October 1,
2011
 
October 2,
2010
 
October 3,
2009
Net sales
 
$
2,228,031

 
 
 
$
2,306,732

 
 
 
$
2,231,232

 
 
 
$
2,013,393

 
 
 
$
1,616,622

 
 
Gross profit
 
213,185

 
 
 
219,913

 
 
 
214,742

 
 
 
206,922

 
 
 
154,776

 
 
Gross margin percentage
 
9.6
%
 
 
 
9.5
%
 
 
 
9.6
%
 
 
 
10.3
%
 
 
 
9.6
%
 
 
Operating income
 
96,623

 
 
 
104,159

 
 
 
101,179

 
 
 
99,652

 
 
 
53,067

 
(2) 
Operating margin percentage
 
4.3
%
 
 
 
4.5
%
 
 
 
4.5
%
 
 
 
4.9
%
 
 
 
3.3
%
 
 
Net income
 
82,259

 
 
 
62,089

 
(1) 
 
89,256

 
 
 
89,533

 
 
 
46,327

 
(2) 
Earnings per share (diluted)
 
$
2.36

 
 
 
$
1.75

 
(1) 
 
$
2.30

 
 
 
$
2.19

 
 
 
$
1.17

 
(2) 
Cash Flow Statement Data
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Cash flows provided by operations
 
$
207,647

 
 
 
$
157,503

 
 
 
$
158,451

 
 
 
$
(7,639
)
 
 
 
$
170,296

 
 
Capital equipment additions
 
108,122

 
 
 
63,697

 
 
 
70,819

 
 
 
65,073

 
 
 
57,427

 
 
Balance Sheet Data
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Working capital
 
$
607,646

 
 
 
$
619,934

 
 
 
$
553,893

 
 
 
$
523,472

 
 
 
$
459,113

 
 
Total assets
 
1,447,684

 
 
 
1,411,467

 
 
 
1,304,525

 
 
 
1,290,379

 
 
 
1,022,672

 
 
Long-term debt and capital lease obligations, net of current portion
 
257,773

 
 
 
260,211

 
 
 
270,292

 
 
 
112,466

 
 
 
133,163

 
 
Shareholders’ equity
 
699,301

 
 
 
649,022

 
 
 
558,882

 
 
 
651,855

 
 
 
527,446

 
 
Return on invested capital (3)
 
14.0
%
 
 
 
15.5
%
 
(1) 
 
15.6
%
 
 
 
19.5
%
 
 
 
13.2
%
 
 
Inventory turnover ratio
 
5.1

 
x
 
4.6

 
x
 
4.4

 
x
 
3.7

 
x
 
4.5

 
x
 
(1)
In fiscal 2012, we established a valuation allowance against our U.S. deferred tax assets resulting in an additional tax provision of approximately $20.6 million ($22.8 million provision, offset by $2.2 million to other comprehensive income) and a decrease in diluted earnings per share of $0.64. Return on invested capital excludes the $20.6 million net deferred tax asset reduction. An additional $1.3 million of valuation allowance established for fiscal 2012 relates to operating losses in Germany and Romania making the total valuation allowance for the year $24.1 million.
(2)
In fiscal 2009, we recorded goodwill impairment charges related to our United Kingdom operations of $5.7 million. In addition, we recorded pre-tax restructuring costs totaling $2.8 million which related primarily to the reduction of workforce in the United States and Mexico as well as fixed assets written down related to the closure of our Ayer, Massachusetts ("Ayer") facility. A favorable tax adjustment of approximately $1.4 million, primarily related to the conclusion of federal and state audits, was also recorded.
 
(3)
The Company defines return on invested capital as tax-effected annualized operating income divided by average invested capital over a rolling five-quarter period. Invested capital is defined as equity plus debt, less cash and cash equivalents, as discussed in Part II, Item 7, "Management's Discussion and Analysis of Financial Condition and Results of Operations."



24

Table of Contents

ITEM 7.
MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
OVERVIEW
Plexus Corp. and its subsidiaries (together “Plexus,” the “Company,” or “we”) participate in the Electronic Manufacturing Services (“EMS”) industry. We deliver optimized Product Realization solutions through a unique Product Realization Value Stream services model. This customer focused services model seamlessly integrates innovative product conceptualization, design, commercialization, manufacturing, fulfillment and sustaining services to deliver comprehensive end-to-end solutions for customers in the Americas ("AMER"), Europe, Middle East and Africa ("EMEA") and Asia-Pacific ("APAC") regions. Customer service is provided to over 140 branded product companies in the Networking/Communications, Healthcare/Life Sciences, Industrial/Commercial and Defense/Security/Aerospace market sectors. Our customers’ products typically require exceptional production and supply-chain flexibility, necessitating an optimized demand-pull-based manufacturing and supply chain solution across an integrated global platform. Many of our customers’ products require complex configuration management and direct order fulfillment to their customers across the globe. In such cases we provide global logistics management and after-market service and repair. Our customers’ products may have stringent requirements for quality, reliability and regulatory compliance. We offer our customers the ability to outsource all phases of product realization, including product specifications; development, design and design verification; regulatory compliance support; prototyping and new product introduction; manufacturing test equipment development; materials sourcing, procurement and supply-chain management; product assembly/manufacturing, configuration and test; order fulfillment, logistics and service/repair.

We provide most of our contract manufacturing services on a turnkey basis, which means that we procure some or all of the materials required for product assembly. We provide some services on a consignment basis, which means that the customer supplies the necessary materials, and we provide the labor and other services required for product assembly. Turnkey services require material procurement and warehousing, in addition to manufacturing, and involve greater resource investments than consignment services. Other than certain test equipment and software used for internal operations, we do not design or manufacture our own proprietary products.

The following information should be read in conjunction with our consolidated financial statements included herein and “Risk Factors” included in Part I, Item 1A herein.

Recent Developments

As previously disclosed, in fiscal 2013, Juniper Networks, Inc. ("Juniper") disengaged from Plexus. Production for Juniper concluded at the end of our third fiscal quarter of 2013 and sales of inventory concluded in our fourth fiscal quarter of 2013. We incurred approximately $0.6 million of severance and asset impairment costs in connection with the disengagement in the third quarter of fiscal 2013; no further related costs are expected. Sales to Juniper were 13% of our net sales in fiscal 2013 as compared to 16% in fiscal 2012, and were from the Company's AMER and APAC segments. We expect no further shipments to Juniper in fiscal 2014.

Our new Neenah, Wisconsin manufacturing facility, which will replace one owned and two leased facilities, opened in the fiscal first quarter of 2014. Consolidation of the three other facilities into our new facility is expected to result in approximately $3.0 to $4.0 million of restructuring charges in the first half of fiscal 2014.
RESULTS OF OPERATIONS
Consolidated Performance Summary
The following table presents selected consolidated financial data for fiscal 2013, 2012 and 2011 (dollars in millions, except per share data):

25

Table of Contents

 
2013
 
2012
 
2011
Net sales
$
2,228.0

 
$
2,306.7

 
$
2,231.2

Gross profit
213.2

 
219.9

 
214.7

Gross margin
9.6
%
 
9.5
%
 
9.6
%
Operating income
96.6

 
104.2

 
101.2

Operating margin
4.3
%
 
4.5
%
 
4.5
%
Net income
82.3

 
62.1

*
89.3

Earnings per share (diluted)
$
2.36

 
$
1.75

*
$
2.30

Return on invested capital
14.0
%
 
15.5
%
 
15.6
%
 
 
 
 
 
 
*See Note 7 in Notes to Consolidated Financial Statements for discussion regarding the fiscal 2012 valuation allowance for deferred tax assets.

Net sales. Net sales for fiscal 2013 decreased $78.7 million, or 3.4 percent, as compared to fiscal 2012. The net sales decrease was primarily the result of a $113.6 million decrease in net sales for one of our larger customers in the industrial/commercial sector, as a result of its decreased end-market demand, as well as an $85.3 million decrease in net sales to Juniper, as a result of its disengagement and lower end-market demand for the products we produced for Juniper. These decreases were partially offset by a $102.4 million increase in net sales to various significant customers in all sectors.
Net sales for fiscal 2012 increased $75.5 million, or 3.4 percent, as compared to fiscal 2011. The net sales increase resulted from higher net sales in all of our market sectors, except for a decrease in the networking/communications sector. The net sales increase primarily related to the continued ramp of production for a significant industrial/commercial sector customer and $81.9 million of incremental revenue from the strategic arrangement with Kontron (the "Kontron arrangement"), as well as program ramps from several other existing customers. These increases in net sales were partially offset by decreased sales in the networking/communications sector due to lower end-market demand and two customer disengagements as a result of the acquisition of such customers by other companies.
Our net sales by market sector for fiscal 2013, 2012 and 2011 were as follows (in millions):
 
Market Sector
 
2013
 
2012
 
2011
Networking/Communications
 
$
826.3

 
$
903.6

 
$
1,029.9

Industrial/Commercial
 
551.0

 
670.8

 
528.0

Healthcare/Life Sciences
 
563.2

 
494.4

 
470.2

Defense/Security/Aerospace
 
287.5

 
237.9

 
203.1

 
 
$
2,228.0

 
$
2,306.7

 
$
2,231.2

Networking/Communications. Net sales for the networking/communications sector decreased $77.3 million for fiscal 2013 compared to fiscal 2012. The change was primarily the result of an $85.3 million decrease in net sales to Juniper, related to its disengagement, partially offset by increased sales to existing customers in this sector as well as program ramps with new customers.
Net sales for the networking/communications sector decreased $126.3 million for fiscal 2012 compared to fiscal 2011. The decline in the sector was primarily the result of the $74.9 million impact from the fiscal 2011 disengagement of two significant customers noted above and overall unfavorable end-market trends reflecting global economic uncertainty. Net sales to Juniper in fiscal 2012 did not change significantly from fiscal 2011.
Industrial/Commercial. Net sales for the industrial/commercial sector decreased $119.8 million for fiscal 2013 compared to fiscal 2012. The decrease was primarily a result of decreased end-market demand for one of our larger customers in the sector, which accounted for $113.6 million of the decreased net sales as compared to the prior year.
Net sales for the industrial/commercial sector increased $142.8 million for fiscal 2012 compared to fiscal 2011. The increase was primarily attributable to the continued ramp of a significant customer and $81.9 million of incremental revenue related to the Kontron arrangement, as well as the addition of a new customer in this sector.

26

Table of Contents

Healthcare/Life Sciences. Net sales for the healthcare/life sciences sector increased $68.8 million for fiscal 2013 compared to fiscal 2012. The increase was primarily due to market share gains and new program ramps with existing customers.
Net sales for the healthcare/life sciences sector increased $24.2 million for fiscal 2012 compared to fiscal 2011. The increase was primarily due to market share gain and new programs with existing customers.
Defense/Security/Aerospace. Net sales for the defense/security/aerospace sector increased $49.6 million for fiscal 2013 compared to fiscal 2012. The increase was the result of new program ramps as well as increased end-market demand for the products we produce for our customers.
Net sales for the defense/security/aerospace sector increased $34.8 million for fiscal 2012 compared to fiscal 2011. The increase was primarily due to stronger end-market demand in the aerospace market as well as the addition of a new customer in this sector.


27

Table of Contents

The percentages of net sales to customers representing 10 percent or more of net sales and net sales to our ten largest customers for fiscal 2013, 2012 and 2011 were as follows: 
 
 
2013
 
2012
 
2011
Juniper
 
13%
 
16%
 
17%
Top 10 customers
 
55%
 
60%
 
55%

Juniper disengaged from Plexus in fiscal 2013 and we expect no further shipments to Juniper in fiscal 2014.
Gross profit. For fiscal 2013, gross profit decreased $6.7 million, or 3.1%, compared to fiscal 2012 primarily due to decreased net sales, increased fixed expenses related to site expansions in Penang, Malaysia, Xiamen, China and Oradea, Romania and unfavorable changes in customer mix. The decrease was partially offset by the sale of certain inventory that had previously been written down. A slightly larger percentage decrease in revenue as compared to the decrease in gross profit for fiscal 2013 led to an increase in gross margin to 9.6 percent for fiscal 2013 from 9.5 percent for fiscal 2012.
 
For fiscal 2012, gross profit increased $5.2 million compared to fiscal 2011 primarily due to the net sales increase. The increase was partially offset by increased fixed expenses related to higher headcount to support the revenue growth, costs related to the addition of a fourth facility in Penang, Malaysia of approximately $5.9 million, transition costs due to the Kontron arrangement, and an unfavorable change in customer mix. Customer mix negatively impacted gross profit due to a higher portion of sales from new programs, which tend to be inherently less profitable during early production stages than mature programs. Gross profit was also negatively impacted by escalated pricing pressure, particularly in our networking/communications sector. These factors led to the reduction in gross margin to 9.5 percent for fiscal 2012 from 9.6 percent for fiscal 2011.
Operating income. For fiscal 2013, operating income decreased $7.5 million compared to fiscal 2012. The operating income decrease reflected the $6.7 million decrease in gross profit described above as well as a $0.8 million increase in selling and administrative expenses (“S&A”). The dollar increase in S&A was primarily due to approximately $2.4 million of recoveries of receivables previously at risk in the prior fiscal year, with no such recovery in the current fiscal year, and approximately $0.8 million of additional amortization expense in fiscal 2013 related to the Kontron arrangement. These increases were partially offset by a $1.3 million decrease in incentive compensation expense and additional reductions due to focused cost management efforts. As a result of the factors discussed above, for fiscal 2013 compared to fiscal 2012, operating margin decreased from 4.5 percent to 4.3 percent.
For fiscal 2012, operating income increased $3.0 million compared to fiscal 2011. The operating income increase reflected the $5.2 million increase in gross profit described above, partially offset by a $2.2 million increase in S&A. The dollar increase in S&A was primarily due to a $1.5 million increase in stock-based compensation expense, $1.3 million of amortization expense resulting from an intangible asset related to the Kontron arrangement and an increase in other personnel expenses. These increases were partially offset by approximately $2.4 million of recoveries of receivables previously at risk. As a result of the factors discussed above, for fiscal 2012 compared to fiscal 2011, operating margin remained at 4.5 percent.

Other income (expense). Other expense decreased to $11.6 million for fiscal 2013 from $12.9 million for fiscal 2012. The decrease in expense was largely due to $3.4 million of decreased interest expense related to our term loan. Interest rate swaps associated with the original term loan expired in fiscal 2013. This resulted in lower floating interest rates prior to the establishment of a new interest rate swap agreement and lower fixed interest rates subsequent to the establishment of the new interest rate swap agreement. This decrease was offset by a $1.4 million increase in foreign exchange losses and a $0.8 million increase in other expense as the result of an accrual for property-related expenses related to the termination of an agreement for additional land in Hangzhou, China.
Other expense increased to $12.9 million for fiscal 2012 from $9.1 million for fiscal 2011. The increase in expense was largely due to $4.4 million of increased interest expense primarily related to the $175 million of borrowings under the Note Purchase Agreement that the Company entered into during the third quarter of fiscal 2011, as discussed in "Liquidity and Capital Resources" below.

28

Table of Contents

Income taxes. Income taxes and effective annual income tax rates, with and without the annual valuation allowance, for fiscal 2013, 2012 and 2011 were as follows (dollars in millions): 
 
 
2013
 
2012
 
2011
Income tax expense, as reported
 
$
2.7

 
$
29.1

 
$
2.8

Valuation allowance (expense)
 
(7.0
)
 
(24.1
)
 
(1.2
)
Income tax (benefit) expense, as adjusted*
 
$
(4.3
)
 
$
5.0

 
$
1.6

 
 
 
 
 
 
 
Effective annual tax rate, as reported
 
3.2
 %
 
31.9
 %
 
3.1
 %
Impact of valuation allowance
 
(8.2
)%
 
(26.4
)%
 
(1.4
)%
Effective annual tax rate, as adjusted*
 
(5.0
)%
 
5.5
 %
 
1.7
 %
*The Company believes that the non-GAAP presentation of income tax expense and effective annual tax rate excluding the impact of the valuation allowance provides a more accurate representation and allows for a more meaningful comparison of reporting periods.
Income tax expense for fiscal 2013 was $2.7 million compared to $29.1 million for fiscal 2012 and $2.8 million for fiscal 2011. The Company's effective annual tax rates primarily vary from the U.S. statutory rate of 35 percent as a result of the mix of earnings from U.S. and foreign jurisdictions and tax holidays granted to our subsidiaries in China and Malaysia, where we derive a significant portion of our earnings. The effective tax rate for fiscal 2013 is significantly lower than the effective rate for fiscal 2012 primarily as a result of the additional valuation allowance recorded in fiscal 2012 on deferred tax assets in the U.S. and discrete tax benefits recorded in 2013, which are further discussed below.
During the preparation of the fiscal 2012 consolidated financial statements, the Company performed an analysis of all available evidence, both positive and negative, regarding the need for a valuation allowance against our U.S. deferred tax assets, consistent with the provisions of ASC Topic 740, “Income Taxes.” Accordingly, as of September 29, 2012, the Company established an additional valuation allowance against the U.S. deferred tax assets, impacting the tax provision by $22.8 million. The additional $1.3 million of the $24.1 million valuation allowance shown above for fiscal 2012 relates to operating losses in Germany and Romania. The Company continues to assess the need to maintain the valuation allowance established on the U.S. deferred tax assets. At the close of fiscal 2013, using the measurement criteria found in ASC Topic 740, the Company believes that the positive evidence does not outweigh the negative and the valuation allowance should remain in place.
In fiscal 2013 the Company recorded an additional valuation allowance of $7.0 million for the full year. During the fourth quarter of fiscal 2013, the Company identified and recorded a discrete tax adjustment placing a full valuation allowance on the net deferred tax assets of our U.K. operations, which increased tax expense by $1.8 million ($0.05 per diluted share). Our analysis found that in the fourth quarter of fiscal 2013, the U.K. operations experienced an unanticipated material decline in sales resulting in a loss in fiscal 2013; losses are forecasted to continue into fiscal 2014. While we expect our U.K. operations to regain profitability, the current, forecasted and cumulative losses are substantial negative evidence. The remaining $5.2 million of the $7.0 million valuation allowance shown above for fiscal 2013 relates to operating losses, primarily in the U.S., Germany and Romania. Having examined the evidence, both positive and negative, it was determined that it is more likely than not that these deferred tax assets will not be utilized and should have a valuation allowance placed against them.

In the fourth quarter of fiscal 2013 the Company identified and recorded several out-of-period tax errors that reduced tax expense by $3.2 million ($0.09 per diluted share). The Company believes these out-of-period tax errors were not material to the fiscal 2013, or previously issued, financial statements.
We currently expect the annual effective tax rate for fiscal 2014 to be approximately 8 to 10 percent.
The Company has been granted tax holidays for its Malaysian and Xiamen, China subsidiaries. These tax holidays expire in fiscal 2024 and 2014, respectively, and are subject to certain conditions with which the Company expects to comply. The expiration of the tax holiday in China is not expected to have a material impact on the effective tax rate or on the results of operations. However, we cannot provide any assurances as to the effect and will continue to monitor the projected impact. In fiscal 2013, 2012 and 2011, these subsidiaries generated income, which resulted in tax reductions of approximately $22.7 million ($0.66 per basic share), $17.5 million ($0.50 per basic share) and $21.7 million ($0.57 per basic share), respectively.
Net Income. Net income, with and without the annual valuation allowance and out-of-period tax adjustments, for fiscal 2013, 2012 and 2011 was as follows (dollars in millions):

29

Table of Contents

 
2013
 
2012
 
2011
Net income, as reported
$
82.3

 
$
62.1

 
$
89.3

Valuation allowance
7.0

 
24.1

 
1.2

Out-of-period tax adjustments
(3.2
)
 

 

Net income, as adjusted*
$
86.1

 
$
86.2

 
$
90.5

*The Company believes that the non-GAAP presentation of net income excluding valuation allowances and out-of-period tax adjustments provides a more meaningful comparison of reporting periods.
Net income for fiscal 2013 increased by $20.2 million, or 32.5 percent, to $82.3 million from fiscal 2012. This increase was primarily as a result of the net $17.1 million year-over-year valuation allowance adjustment. Excluding the valuation allowance and fourth quarter tax out-of-period adjustments, fiscal 2013 net income decreased by $0.1 million, or 0.1 percent, from fiscal 2012 to $86.1 million.
Primarily as a result of the $24.1 million valuation allowance adjustment, net income for fiscal 2012 decreased by $27.2 million, or 30.4 percent, to $62.1 million from fiscal 2011. Excluding the valuation allowance adjustment, net income was $86.2 million, a decrease of $4.3 million, or 4.8 percent from fiscal 2011 as a result of higher fixed expenses and increased interest expense, partially offset by the effect of higher net sales.
Diluted earnings per share. Diluted earnings per share, with and without the annual valuation allowance and out-of-period tax adjustments, for fiscal 2013, 2012 and 2011 was as follows:
 
2013
 
2012
 
2011
Diluted earnings per share, as reported
$
2.36

 
$
1.75

 
$
2.30

Valuation allowance
0.20

 
0.68

 
0.03

Out-of-period tax adjustments
(0.09
)
 

 

Diluted earnings per share, as adjusted*
$
2.47

 
$
2.43

 
$
2.33

*The Company believes that the non-GAAP presentation of diluted earnings per share excluding valuation allowances and out-of-period tax adjustments provides a more meaningful comparison of reporting periods.
Diluted earnings per share increased to $2.36 for fiscal 2013 from $1.75 for fiscal 2012 primarily as a result of the impact of the valuation allowances and fourth quarter out-of-period tax adjustments discussed above. Excluding the impact of the valuation allowances and out-of-period tax adjustments, diluted earnings per share increased by $0.04 in fiscal 2013 as compared to fiscal 2012. The increase in diluted earnings per share, as adjusted was primarily due to the positive impact of fewer outstanding shares in 2013 due to the stock repurchase program.
Diluted earnings per share decreased to $1.75 for fiscal 2012 from $2.30 for fiscal 2011 primarily as a result of the valuation allowance adjustment discussed above. Excluding the $0.68 per share impact of the valuation allowance adjustment, diluted earnings per share increased to $2.43 for fiscal 2012. The increase in diluted earnings per share excluding the valuation allowance adjustment was primarily due to the effect of a decrease in diluted weighted average shares outstanding as a result of our share repurchases completed late in fiscal 2011, partially offset by lower net income.
Return on Invested Capital (“ROIC”). We use a 5-5 financial model which is aligned with our business strategy, and includes a ROIC goal of 5% over our weighted average cost of capital (“WACC”) and a 5% operating margin target. Our primary focus is our ROIC goal, which is designed to create shareholder value and generate enough cash to self-fund our targeted organic revenue growth rate of 15%. For fiscal 2014 and forward, we have reduced our targeted organic revenue growth rate to 12% to reflect opportunities in the markets we serve.
We review our internal calculation of WACC annually; at the end of fiscal 2013 we reduced our estimated WACC from 12.0% to 11.0% for fiscal 2014. By exercising discipline to generate ROIC in excess of our WACC, our goal is to create value for our shareholders. ROIC was 14.0%, 15.5% (excluding $20.6 million net deferred tax asset reduction) and 15.6% for fiscal 2013, 2012 and 2011, respectively. The decrease in ROIC in fiscal 2013 from fiscal 2012 was due to lower operating income and an increase in average invested capital as a result of capital expenditures for facility expansions. See the table below for our calculation of ROIC (dollars in millions):

30

Table of Contents

 
 
2013
 
2012
 
2011
Operating income (tax effected)
 
$
89.9

 
$
96.9

 
$
98.1

Average invested capital
 
642.1

 
623.0

 
627.6

After-tax ROIC
 
14.0
%
 
15.5
%
 
15.6
%
We define ROIC as tax-effected annualized operating income divided by average invested capital over a rolling five-quarter period for the fiscal year. Invested capital is defined as equity plus debt, less cash and cash equivalents. Other companies may not define or calculate ROIC in the same way. ROIC is a non-GAAP financial measure which should be considered in addition to, not as a substitute for, measures of our financial performance prepared in accordance with United States generally accepted accounting principles (“GAAP”).

Non-GAAP financial measures, including ROIC, are used for internal management assessments because such measures provide additional insight into ongoing financial performance. In particular, we provide ROIC because we believe it offers insight into the metrics that are driving management decisions because we view ROIC as an important measure in evaluating the efficiency and effectiveness of our long-term capital requirements. We also use a derivative measure of ROIC as a performance criteria in determining certain elements of compensation.
For a reconciliation of ROIC to our financial statements that were prepared using GAAP, see exhibit 99.1 to this annual report on Form 10-K, which exhibit is incorporated herein by reference.
REPORTABLE SEGMENTS
A further discussion of our fiscal 2013, 2012 and 2011 financial performance by reportable segment is presented below (in millions):
 
 
 
2013
 
2012
 
2011
Net sales:
 
 
 
 
 
 
AMER
 
$
1,062.8

 
$
1,255.9

 
$
1,304.9

APAC
 
1,146.3

 
1,110.4

 
1,063.1

EMEA
 
122.5

 
95.4

 
92.2

Elimination of inter-segment sales
 
(103.6
)
 
(155.0
)
 
(229.0
)
 
 
$
2,228.0

 
$
2,306.7

 
$
2,231.2

Operating income (loss):
 
 
 
 
 
 
AMER
 
$
70.9

 
$
91.1

 
$
68.7

APAC
 
116.3

 
101.9

 
118.1

EMEA
 
(3.1
)
 
(2.3
)
 
(3.0
)
Corporate and other costs
 
(87.5
)
 
(86.5
)
 
(82.6
)
 
 
$
96.6

 
$
104.2

 
$
101.2

Americas (AMER):
Net sales for fiscal 2013 decreased $193.1 million, or 15.4 percent, from fiscal 2012, due primarily to $113.6 million of decreased sales resulting from lower end-market demand from a significant industrial/commercial sector customer as well as a $71.1 million decrease in net sales due to a drop in demand from Juniper related to its disengagement and lower end-market demand for the products we produced for Juniper. Operating income for fiscal 2013 decreased $20.2 million from fiscal 2012 due primarily to the decrease in net sales.
Net sales for fiscal 2012 decreased $49.0 million, or 3.8 percent, from fiscal 2011, primarily as a result of decreased end-market demand in the networking/communications sector, which included the loss of two significant networking/communications customers, one as a result of a customer disengagement and the other as a result of a drop in end-market demand for the mix of products we produced for that customer. These decreases were partially offset by the ramp of production for a significant industrial/commercial sector customer and the addition of a new customer in this sector as well. Net sales to Juniper in fiscal 2012 did not change significantly from fiscal 2011. Operating income for fiscal 2012 increased $22.4 million from fiscal 2011 due to a favorable customer mix, an increase in engineering design and services profitability of approximately $5.1 million and $2.4 million of recoveries of receivables previously at risk.
Asia-Pacific (APAC):

31

Table of Contents

Net sales for fiscal 2013 increased $35.9 million, or 3.2 percent, from fiscal 2012. The increase in net sales was primarily experienced in the healthcare/life sciences sector as a result of new program wins which more than offset the $14.2 million decrease in sales to Juniper as a result of its disengagement. Operating income increased $14.4 million in fiscal 2013 as compared to fiscal 2012, primarily as a result of the increase in net sales and favorable changes in customer mix combined with higher costs incurred in fiscal 2012 related to facility expansion and the Kontron arrangement.
Net sales for fiscal 2012 increased $47.3 million, or 4.4 percent, from fiscal 2011. This growth reflected incremental revenue from the Kontron arrangement of approximately $81.9 million as well as higher net sales to multiple customers across our market sectors. These increases were partially offset by decreased net sales from the disengagement of one customer in the networking/communications sector and a decline in end-market demand for the mix of products we produce for another customer in this sector as well for an industrial/commercial sector customer. Operating income decreased $16.2 million in fiscal 2012 as compared to fiscal 2011, primarily as a result of costs related to the addition of a fourth facility in Penang, Malaysia of approximately $5.9 million, increased expenses related to higher headcount to support capacity investments, transition costs for the Kontron arrangement and escalated pricing pressure.
Europe, Middle East and Africa (EMEA):
Net sales for fiscal 2013 increased $27.1 million, or 28.4 percent, from fiscal 2012. The increase in net sales was driven primarily by approximately $22.0 million from the ramp of new customers in each of our market sectors, partially offset by decreased net sales of $8.5 million due to the disengagement of an industrial/commercial customer. Operating loss increased in the current year as compared to the prior year due to an increase in fixed costs associated with the new facility in Oradea, Romania and the ramping of new customers at the United Kingdom facility. An increase in labor and parts costs in the fourth quarter of 2013 also contributed to the increased operating loss.
Net sales for fiscal 2012 increased $3.2 million, or 3.5 percent, from fiscal 2011. The increase in net sales was driven primarily by the addition of new customers in each of our market sectors, partially offset by decreased net sales to an industrial/commercial customer as a result of reduced end-market demand for the mix of products we produce for that customer. Operating results improved in fiscal 2012 as compared to fiscal 2011 due to increased profitability in Romania based on the mix of customers and increased leverage at the facility.
LIQUIDITY AND CAPITAL RESOURCES
Cash and cash equivalents were $341.9 million as of September 28, 2013 compared to $297.6 million as of September 29, 2012. The increase in the balance of our cash and cash equivalents was due primarily to cash generated from operations, partially offset by purchases of common stock as part of our stock repurchase program as well as increased capital expenditures for footprint expansions.
As of September 28, 2013, approximately 87% of our cash balance was held outside of the U.S. by our foreign subsidiaries. Certain foreign countries impose taxes and overall penalties on transfers of cash; however, our intent is to permanently reinvest funds held in these countries. If this cash were remitted to the U.S., additional tax obligations may result that would reduce the amount of cash ultimately available to us in the U.S. Currently, we believe that cash held in the U.S., together with cash available under U.S. credit facilities and cash from foreign subsidiaries that could be remitted to the U.S. without tax consequences, will be sufficient to meet our U.S. liquidity needs for the next twelve months and for the foreseeable future.
Cash Flows. The table below shows a summary of cash flows for fiscal 2013, 2012 and 2011 (in millions):
 
2013
 
2012
 
2011
Cash provided by operating activities
$
207.6

 
$
157.5

 
$
158.5

Cash used in investing activities
$
(107.2
)
 
$
(92.2
)
 
$
(68.7
)
Cash used in financing activities
$
(57.4
)
 
$
(10.8
)
 
$
(37.0
)
Operating Activities. Cash flows provided by operating activities were $207.6 million for fiscal 2013, as compared to cash flows provided by operating activities of $157.5 million for fiscal 2012. Cash flows provided by operating activities increased due to overall improved working capital management as discussed below.
Cash flows provided by operating activities were $157.5 million for fiscal 2012, as compared to cash flows provided by operating activities of $158.5 million for fiscal 2011. Cash flows provided by operating activities decreased slightly due to lower net income, partially offset by overall improved working capital management.

The following table shows a summary of cash cycle days for the periods indicated (in days):

32

Table of Contents

 
Three months ended
 
September 28,
2013
 
September 29,
2012
 
October 1,
2011
Days in accounts receivable
49
 
49
 
48
Days in inventory
72
 
78
 
85
Days in accounts payable
(56)
 
(58)
 
(57)
Days in cash deposits
(12)
 
(6)
 
(6)
Annualized cash cycle
53
 
63
 
70

We calculate days in accounts receivable as accounts receivable for the respective quarter divided by annualized sales for the respective quarter by day. We calculate days in inventory, accounts payable, and cash deposits as each balance sheet line item for the respective quarter divided by annualized cost of sales for the respective quarter by day.
Days in accounts receivable for the three months ended September 28, 2013 remained consistent compared to the three months ended September 29, 2012.
Days in inventory for the three months ended September 28, 2013 decreased by six days compared to the three months ended September 29, 2012, due to a decrease in year-end inventory balances resulting primarily from shipments to Juniper as a consequence of its disengagement.
Days in accounts payable for the three months ended September 28, 2013 decreased by two days compared to the three months ended September 29, 2012, primarily due to the timing of the purchases during the quarter.
Days in cash deposits for the three months ended September 28, 2013 increased by six days compared to the three months ended September 29, 2012 primarily due to cash deposits received from Juniper as a result of its disengagement. As of September 28, 2013, the Company held $11.0 million in inventory deposits and $15.3 million in accounts receivable deposits from Juniper.
We calculate cash cycle as the sum of days in accounts receivable and days in inventory, less days in accounts payable and days in cash deposits. As of September 28, 2013 cash cycle days decreased by ten days compared to September 29, 2012 due to the factors noted above.

Free Cash Flow. Free cash flow (“FCF”), which we define as cash flow provided by (used in) operations less capital expenditures, increased for fiscal 2013, to $99.5 million, as compared to FCF of $93.8 million for fiscal 2012. Although operating income decreased in fiscal 2013, the decrease was more than offset by reduced working capital, as evidenced by the ten day decrease in cash cycle days, as described above, which led to higher FCF.
Non-GAAP financial measures, including FCF, are used for internal management assessments because such measures provide additional insight into ongoing financial performance. In particular, we provide FCF because we believe it offers insight into the metrics that are driving management decisions. We view FCF as an important financial metric as it demonstrates our ability to generate cash and allows us to pursue opportunities that enhance shareholder value. FCF is a non-GAAP financial measure which should be considered in addition to, not as a substitute for, measures of our financial performance prepared in accordance with U.S. GAAP.
For a reconciliation of FCF to our financial statements that were prepared using GAAP, see below (in millions):
 
2013
 
2012
 
2011
Cash provided by operating activities
$
207.6

 
$
157.5

 
$
158.4

Capital expenditures
(108.1
)
 
(63.7
)
 
(70.8
)
Free cash flow
$
99.5

 
$
93.8

 
$
87.6


Investing Activities. Cash flows used in investing activities totaled $107.2 million for fiscal 2013 as compared to cash flows used in investing activities of $92.2 million for fiscal 2012. Cash flows used in investing activities increased primarily due to the additional investments in footprint expansions partially offset by the prior period including the Kontron arrangement. Cash flows used in investing activities for fiscal 2012 increased to $92.2 million from $68.7 million in fiscal 2011 primarily due to

33

Table of Contents

the expenditure of $34.2 million of cash related to the Kontron arrangement in fiscal 2012 (see Note 2 in Notes to Consolidated Financial Statements for information regarding the Kontron arrangement).

We utilized available cash and operating cash flows as the sources for funding our operating requirements during fiscal 2013. We currently estimate capital expenditures for fiscal 2014 will be approximately $75 million. A portion of the fiscal 2014 capital expenditures are anticipated to be used for leasehold improvements for a new leased manufacturing facility in Guadalajara, Mexico. We believe the estimated capital expenditures will continue to be funded from operations, and may be supplemented by short-term borrowings, if required.

Financing Activities. Cash flows used in financing activities totaled $57.4 million for fiscal 2013, as compared to cash flows used in financing activities of $10.8 million for fiscal 2012. Cash flows used in financing activities for fiscal 2013 were comprised primarily of $49.9 million of purchases of common stock as part of our stock repurchase program as well as payments on debt and capital leases. Cash flows used in financing activities for fiscal 2012 were comprised primarily of payments on debt, partially offset by debt proceeds and proceeds from the exercise of stock options.

On February 16, 2011 the Company’s Board of Directors approved a share repurchase program that authorized the Company to repurchase up to $200 million of common stock. On August 15, 2011, the Company completed its share repurchase program with a total of 6.3 million shares purchased for approximately 200.0 million, at an average price of $31.69 per share. These shares were recorded as treasury stock.

On October 23, 2012, the Board of Directors approved a stock repurchase program under which the Company was authorized to repurchase up to $50 million of its common stock. This program was completed in the fourth quarter of fiscal 2013. During fiscal 2013, the Company repurchased 1,821,698 shares under this program for approximately $49.9 million, at an average price of $27.37 per share. These shares were recorded as treasury stock.

On August 19, 2013, the Board of Directors approved a stock repurchase program under which the Company is authorized to repurchase up to $30 million of its common stock in fiscal 2014. Accordingly, no shares were purchased under this authorization in fiscal 2013.

On May 15, 2012, the Company entered into a five-year, $250 million senior unsecured credit facility that terminates on May 15, 2017 (the “Credit Facility”). The Credit Facility includes a $160 million revolving credit facility and a $90 million term loan. The revolving credit facility potentially may be increased by $100 million (the "increase option") to $260 million generally by mutual agreement of the Company, the lenders, the letter of credit issuers and the administrative agent named in the related credit agreement (the "Credit Agreement"), subject to certain customary conditions. Quarterly principal repayments of the Credit Facility term loan of $3.75 million per quarter ended on March 28, 2013. The final $75 million payment is due on May 15, 2017.

The financial covenants (as defined under the Credit Facility) require that the Company maintain, as of each fiscal quarter end, a maximum total leverage ratio and a minimum interest coverage ratio. As of September 28, 2013, the Company was in compliance with all covenants of the Credit Facility. Borrowings under the Credit Facility, at the Company's option, bear interest at a defined base rate or the LIBOR rate plus, in each case, an applicable margin based upon the Company's leverage ratio as defined in the Credit Agreement. Rates would increase upon negative changes in specified Company financial metrics and would decrease upon reduction in the current total leverage ratio, to no less than LIBOR plus 1.00% or base rate plus 0%. We are also required to pay an annual commitment fee on the unused revolver credit commitment based on our leverage ratio; as of September 28, 2013, the fee was 0.20%. On April 4, 2013, the original interest rate swaps associated with our term loan expired, and on June 4, 2013, the Company entered into a new interest rate swap associated with the term loan which extends through May 5, 2017. As of September 28, 2013, all outstanding debt under the Credit Facility is at a fixed interest rate as a result of a fixed interest rate swap contract. There is no floating rate debt outstanding under the Credit Facility as of September 28, 2013.
 
The Company also has outstanding 5.20% Senior Notes, due on June 15, 2018 (the "Notes"); $175 million principal of the Notes was outstanding as of both September 28, 2013 and September 29, 2012.
   
The related Note Purchase Agreement contains certain financial covenants, which include a maximum total leverage ratio, a minimum interest coverage ratio and a minimum net worth test, all as defined in the agreements. As of September 28, 2013, we were in compliance with all such covenants relating to the Notes and the Note Purchase Agreement, which are consistent with those in the Credit Agreement discussed above.


34

Table of Contents

The Credit Facility and Note Purchase Agreement allow for the future payment of cash dividends or the future repurchases of shares provided that no event of default (including any failure to comply with a financial covenant) exists at the time of, or would be caused by, the dividend payment or the share repurchases. We have not paid cash dividends in the past and do not currently anticipate paying them in the future. However, we evaluate from time to time potential uses of excess cash, which in the future may include share repurchases above those already authorized, a special dividend or recurring dividends.

Based on current expectations, we believe that our projected cash flows from operations, available cash and cash equivalents, potential borrowings under the Credit Facility, and our leasing capabilities should be sufficient to meet our working capital and fixed capital requirements for the next twelve months and for the foreseeable future. If our future financing needs increase, we may need to arrange additional debt or equity financing. Accordingly, we evaluate and consider from time to time various financing alternatives to supplement our financial resources. However, particularly due to the current uncertainty of the credit and financial markets, we cannot be assured that we will be able to make any such arrangements on acceptable terms.

CONTRACTUAL OBLIGATIONS, COMMITMENTS AND OFF-BALANCE SHEET OBLIGATIONS

Our disclosures regarding contractual obligations and commercial commitments are located in various parts of our regulatory filings. Information in the following table provides a summary of our contractual obligations and commercial commitments as of September 28, 2013 (dollars in millions):
 
Payments Due by Fiscal Year
Contractual Obligations
Total
 
2014
 
2015-2016
 
2017-2018
 
2019 and thereafter
 
 
 
 
 
 
 
 
 
 
Long-Term Debt Obligations (1,2)
$
297.3

 
$
10.4

 
$
20.9

 
$
266.0

 
$

Capital Lease Obligations
13.0

 
4.6

 
7.8

 
0.6

 

Operating Lease Obligations
46.0

 
12.7

 
14.6

 
6.6

 
12.1

Purchase Obligations (3)
410.0

 
405.1

 
4.7

 
0.1

 
0.1

Other Long-Term Liabilities on the Balance Sheet (4)
9.3

 
1.4

 
1.6

 
0.4

 
5.9

Other Long-Term Liabilities not on the Balance Sheet (5)
19.8

 
17.8

 
2.0

 

 

Total Contractual Cash Obligations
$
795.4

 
$
452.0

 
$
51.6

 
$
273.7

 
$
18.1


1)
Includes amounts outstanding under the Credit Facility. As of September 28, 2013, the outstanding balance was $75.0 million. The amounts listed above include interest; see Note 5 in Notes to Consolidated Financial Statements for further information.

2)
Includes $175 million in principal amount of Notes issued in fiscal 2011. The amounts listed above include interest; see Note 5 in Notes to Consolidated Financial Statements for further information.

3)
As of September 28, 2013, purchase obligations consist of purchases of inventory and equipment in the ordinary course of business.

4)
As of September 28, 2013, other long-term obligations on the balance sheet included deferred compensation obligations to certain of our former and current executive officers, as well as other key employees, and an asset retirement obligation. We have excluded from the above table the impact of approximately $7.4 million, as of September 28, 2013, related to unrecognized income tax benefits. The Company cannot make reliable estimates of the future cash flows by period related to this obligation.

5)
As of September 28, 2013, other long-term obligations not on the balance sheet consisted of a commitment for salary continuation in the event employment of one executive officer of the Company is terminated without cause as well as commitments to complete new manufacturing facilities in Guadalajara, Mexico, Neenah, Wisconsin and Oradea, Romania.

DISCLOSURE ABOUT CRITICAL ACCOUNTING POLICIES
Our accounting policies are disclosed in Note 1 of Notes to the Consolidated Financial Statements. During fiscal 2013, there were no material changes to these policies. Our more critical accounting policies are noted below:

35

Table of Contents

Stock-Based Compensation – The Financial Accounting Standard Board (“FASB”) requires all share-based payments to employees, including grants of employee stock options, to be measured at fair value and expensed in the consolidated statements of comprehensive income over the service period (generally the vesting period) of the grant. We used the modified prospective application, under which compensation expense is only recognized in the consolidated statements of comprehensive income beginning with the first period that we adopted the FASB regulation and continuing to be expensed thereafter. We continue to use the Black-Scholes valuation model to value stock options. See Note 10 in Notes to Consolidated Financial Statements for further information.

Impairment of Long-Lived Assets – We review property, plant and equipment for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. Recoverability of property, plant and equipment is measured by comparing its carrying value to the projected cash flows the property, plant and equipment are expected to generate. If such assets are considered to be impaired, the impairment to be recognized is measured as the amount by which the carrying value of the property exceeds its fair market value. The impairment analysis is based on management’s assumptions, including future revenue and cash flow projections. Circumstances that may lead to impairment of property, plant and equipment include reduced expectations for future performance or industry demand and possible further restructurings.
Revenue – Net sales from manufacturing services are recognized when the product has been shipped, the risk of ownership has transferred to the customer, the price to the buyer is fixed or determinable, and recoverability is reasonably assured. This point depends on contractual terms and generally occurs upon shipment of the goods from Plexus. Generally, there are no formal customer acceptance requirements or further obligations related to manufacturing services; if such requirements or obligations exist, then a sale is recognized at the time when such requirements are completed and such obligations fulfilled.
Net sales from engineering design and development services, which are generally performed under contracts with durations of twelve months or less, are typically recognized as costs are incurred utilizing the proportional performance model. The completed performance model is used if certain customer acceptance criteria exist. Any losses are recognized when anticipated.
Sales are recorded net of estimated returns of manufactured product based on management’s analysis of historical rates of returns, current economic trends and changes in customer demand. Net sales also include amounts billed to customers for shipping and handling, if applicable. The corresponding shipping and handling costs are included in cost of sales.
Derivatives and Hedging Activities – All derivatives are recognized on the balance sheet at their estimated fair value. On the date a derivative contract is entered into, the Company designates the derivative as a hedge of a recognized asset or liability (a “fair value” hedge), a hedge of a forecasted transaction or of the variability of cash flows to be received or paid related to a recognized asset or liability (a “cash flow” hedge), or a hedge of the net investment in a foreign operation. The Company does not enter into derivatives for speculative purposes. Changes in the fair value of a derivative that qualify as a fair value hedge are recorded in earnings along with the gain or loss on the hedged asset or liability. Changes in the fair value of a derivative that qualifies as a cash flow hedge are recorded in “Accumulated other comprehensive income”, until earnings are affected by the variability of cash flows. Changes in the fair value of a derivative used to hedge the net investment in a foreign operation are recorded in the “Accumulated other comprehensive income” accounts within shareholders’ equity. See Note 6 – Derivatives and Fair Value Measurements for further details.
Income Taxes – The Company accounts for income taxes in accordance with ASC Topic 740, “Income Taxes.” Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between financial statement carrying amounts of existing assets and liabilities and their respective tax bases and operating loss and tax credit carryforwards. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The Company does not currently provide for additional U.S. and foreign income taxes which would become payable upon repatriation of undistributed earnings of certain foreign subsidiaries. The Company maintains valuation allowances when it is more likely than not that all or a portion of a deferred tax asset will not be realized. In determining whether a valuation allowance is required, the Company takes into account such factors as prior earnings history, expected future earnings, carryback and carryforward periods, and tax strategies that could potentially enhance the likelihood of realization of a deferred tax asset.
NEW ACCOUNTING PRONOUNCEMENTS
See Note 1, "Description of Business and Significant Accounting Policies," in Notes to Consolidated Financial Statements regarding recent accounting pronouncements. 

ITEM 7A.
QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

36

Table of Contents

We are exposed to market risk from changes in foreign exchange and interest rates. We selectively use financial instruments to reduce such risks.
Foreign Currency Risk
We do not use derivative financial instruments for speculative purposes. Our policy is to selectively hedge our foreign currency denominated transactions in a manner that partially offsets the effects of changes in foreign currency exchange rates. We typically use foreign currency contracts to hedge only those currency exposures associated with certain assets and liabilities denominated in non-functional currencies. Corresponding gains and losses on the underlying transaction generally offset the gains and losses on these foreign currency hedges. Our international operations create potential foreign exchange risk.
Our percentages of transactions denominated in currencies other than the U.S. dollar for fiscal 2013, 2012, and 2011 were as follows: 
 
 
2013
 
2012
 
2011
Net Sales
 
7%
 
5%
 
6%
Total Costs
 
11%
 
14%
 
14%
The Company has evaluated the potential foreign currency exchange rate risk on transactions denominated in currencies other than the U.S. dollar for the periods presented above. Based on the Company’s overall currency exposure, as of September 28, 2013, a 10 percent change in the value of the U.S. dollar relative to our other transactional currencies would not have a material effect on the Company’s financial position, results of operations, or cash flows.
Interest Rate Risk
We have financial instruments, including cash equivalents, which are sensitive to changes in interest rates. We consider the use of interest rate swaps based on existing market conditions and have entered into interest rate swaps for our term loans. For more information, refer to Note 6, "Derivatives and Fair Value Measurements," in Notes to Consolidated Financial Statements. Interest rate swap agreements are subject to the further risk that the counterparties to these agreements may fail to comply with their obligations thereunder.
The primary objective of our investment activities is to preserve principal, while maximizing yields without significantly increasing market risk. To achieve this, we maintain our portfolio of cash equivalents in a variety of highly rated securities, money market funds and certificates of deposit, and limit the amount of principal exposure to any one issuer.
As of September 28, 2013, our only material interest rate risk is associated with our term loan under our Credit Facility. Through the use of interest rate swaps, as described above, we fixed the basis on which we pay interest, and the borrowings under the Note Purchase Agreement are based on a fixed interest rate, thus eliminating much of our interest rate risk.

ITEM 8.
FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
See Part IV, Item 15 on page 40. 

ITEM 9.
CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE
None. 

ITEM 9A.
CONTROLS AND PROCEDURES
Disclosure Controls and Procedures:  The Company maintains disclosure controls and procedures designed to ensure that the information the Company must disclose in its filings with the Securities and Exchange Commission (“SEC”) is recorded, processed, summarized and reported on a timely basis. The Company’s principal executive officer and principal financial officer have reviewed and evaluated, with the participation of the Company’s management, the Company’s disclosure controls and procedures as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”) as of the end of the period covered by this report (the “Evaluation Date”). Based on such evaluation, the chief executive officer and chief financial officer have concluded that, as of the Evaluation Date, the Company’s disclosure controls and procedures are effective (a) in recording, processing, summarizing and reporting, on a timely basis, information required to

37

Table of Contents

be disclosed by the Company in the reports the Company files or submits under the Exchange Act, and (b) in assuring that information is accumulated and communicated to the Company’s management, including the chief executive officer and chief financial officer, as appropriate to allow timely decisions regarding required disclosure.
Management’s Annual Report on Internal Control Over Financial Reporting:  Management of the Company is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rules 13a-15(f) and 15d-15(f). Management of the Company, including its chief executive officer and chief financial officer, has assessed the effectiveness of its internal control over financial reporting as of September 28, 2013, based on the criteria established in “Internal Control – Integrated Framework” issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”). Based on its assessment and those criteria, management of the Company has concluded that, as of September 28, 2013, the Company’s internal control over financial reporting was effective.
The independent registered public accounting firm of PricewaterhouseCoopers LLP has audited the Company’s internal control over financial reporting as of September 28, 2013, as stated in its report included herein on page 42.
Changes in Internal Control Over Financial Reporting:  There have been no changes in the Company’s internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) that occurred during the Company’s most recent fiscal quarter that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.
Limitations on the Effectiveness of Controls:  Our management, including our chief executive officer and chief financial officer, does not expect that our disclosure controls and internal controls will prevent all errors and all fraud. A control system, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within the Company have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty, and that breakdowns can occur because of simple errors or mistakes. Additionally, controls can be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the control. The design of any system of controls also is based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions; over time, a control may become inadequate because of changes in conditions, or the degree of compliance with the policies or procedures may deteriorate. Because of the inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and not be detected.
Notwithstanding the foregoing limitations on the effectiveness of controls, we have nonetheless reached the conclusion that the Company's disclosure controls and procedures and internal control over financial reporting are effective at the reasonable assurance level.

ITEM 9B.
OTHER INFORMATION
None.

38

Table of Contents

PART III
ITEM 10.
DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE
Information in response to this item is incorporated herein by reference to “Election of Directors” and “Corporate Governance” in the Company’s Proxy Statement for its 2014 Annual Meeting of Shareholders (“2014 Proxy Statement”) and “Executive Officers of the Registrant” in Part I hereof.
Our Code of Conduct and Business Ethics is posted on our website at www.plexus.com. You may access the Code of Conduct and Business Ethics by following the links under “Investor Relations, Corporate Governance” at our website. Plexus’ Code of Conduct and Business Ethics applies to all members of the board of directors, officers and employees. 

ITEM 11.
EXECUTIVE COMPENSATION
Incorporated herein by reference to “Corporate Governance – Board Committees – Compensation and Leadership Development Committee,” “Corporate Governance – Directors’ Compensation,” “Compensation Discussion and Analysis,” “Executive Compensation” and “Compensation Committee Report” in the 2014 Proxy Statement.

ITEM 12.
SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS
Incorporated herein by reference to “Security Ownership of Certain Beneficial Owners and Management” in the 2014 Proxy Statement.
Equity Compensation Plan Information
The following table gives aggregate information regarding grants under all Plexus equity compensation plans through September 28, 2013: 
Plan category
 
Number of securities
to be issued upon
exercise of
outstanding options,
warrants and rights (1)
 
Weighted-average
exercise price of
outstanding options,
warrants and rights (2)
 
Number of securities
remaining available
for future issuance under
equity compensation
plans (excluding
securities reflected
in 1stcolumn)
Equity compensation plans
approved by securityholders
 
3,718,971

 
$
29.27

 
2,097,007

Equity compensation plans not
approved by securityholders
 

 
n/a

 

Total
 
3,718,971

 
$
29.27

 
2,097,007

 
(1)
Represents options, stock-settled stock appreciation rights (“SARs”) and restricted stock units ("RSUs"), and unrestricted stock awards ("SAs") granted under the Plexus Corp. 2008 Long-Term Incentive Plan, or its predecessors, the 2005 Equity Incentive Plan, the 1998 Stock Option Plan and the 1995 Directors’ Stock Option Plan, all of which were approved by shareholders. No further awards may be made under the predecessor plans.

(2)
The weighted average exercise prices excludes RSUs.

ITEM 13.
CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE
Incorporated herein by reference to “Corporate Governance – Director Independence” and “Certain Transactions” in the 2014 Proxy Statement.

ITEM 14.
PRINCIPAL ACCOUNTING FEES AND SERVICES
Incorporated herein by reference to the subheading “Auditors - Fees and Services” in the 2014 Proxy Statement. 

39

Table of Contents

PART IV
ITEM 15.
EXHIBITS, FINANCIAL STATEMENT SCHEDULES
 
(a)
 
Documents filed
 
 
 
 
Financial Statements and Financial Statement Schedule. See the following list of Financial Statements and Financial Statement Schedule on page 41.
 
 
(b)
 
Exhibits. See Exhibit Index included as the last page of this report, which index is incorporated herein by reference.


40

Table of Contents

PLEXUS CORP.
List of Financial Statements and Financial Statement Schedule
September 28, 2013
 
 
 
Contents
Pages
 
 
 
 
Consolidated Financial Statements:
 
 
 
 
 
 
 
 
 
 
 
 
 
Financial Statement Schedule:
 
 
 
NOTE: All other financial statement schedules are omitted because they are not applicable or the required information is included in the Consolidated Financial Statements or notes thereto.


41

Table of Contents

Report of Independent Registered Public Accounting Firm
To the Shareholders
and Board of Directors
of Plexus Corp.:
In our opinion, the consolidated financial statements listed in the accompanying index present fairly, in all material respects, the financial position of Plexus Corp. and its subsidiaries at September 28, 2013 and September 29, 2012, and the results of their operations and their cash flows for each of the three years in the period ended September 28, 2013 in conformity with accounting principles generally accepted in the United States of America. In addition, in our opinion, the financial statement schedule listed in the accompanying index presents fairly, in all material respects, the information set forth therein when read in conjunction with the related consolidated financial statements. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of September 28, 2013, based on criteria established in Internal Control - Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company’s management is responsible for these financial statements and financial statement schedule, for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in Management’s Annual Report on Internal Control Over Financial Reporting appearing under Item 9A. Our responsibility is to express opinions on these financial statements, on the financial statement schedule, and on the Company’s internal control over financial reporting based on our integrated audits. We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our audits of the financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
/s/ PricewaterhouseCoopers LLP
Milwaukee, Wisconsin
November 22, 2013


42

Table of Contents



PLEXUS CORP. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME
for the fiscal years ended September 28, 2013September 29, 2012 and October 1, 2011
(in thousands, except per share data)
 
 
 
2013
 
2012
 
2011
Net sales
 
$
2,228,031

 
$
2,306,732

 
$
2,231,232

Cost of sales
 
2,014,846

 
2,086,819

 
2,016,490

Gross profit
 
213,185

 
219,913

 
214,742

Selling and administrative expenses
 
116,562

 
115,754

 
113,563

Operating income
 
96,623

 
104,159

 
101,179

Other income (expense):
 
 
 
 
 
 
Interest expense
 
(12,638
)
 
(16,064
)
 
(11,649
)
Interest income
 
1,640

 
1,761

 
1,367

Miscellaneous
 
(642
)
 
1,375

 
1,206

Income before income taxes
 
84,983

 
91,231

 
92,103

Income tax expense
 
2,724

 
29,142

 
2,847

Net income
 
$
82,259

 
$
62,089

 
$
89,256

Earnings per share:
 
 
 
 
 
 
Basic
 
$
2.40

 
$
1.78

 
$
2.34

Diluted
 
$
2.36

 
$
1.75

 
$
2.30

Weighted average shares outstanding:
 
 
 
 
 
 
Basic
 
34,330

 
34,874

 
38,063

Diluted
 
34,892

 
35,529

 
38,800

Comprehensive income:
 
 
 
 
 
 
Net income
 
$
82,259

 
$
62,089

 
$
89,256

Other comprehensive income:
 
 
 
 
 
 
     Derivative instrument fair market value adjustment - net of
 
 
 
 
 
 
     income tax
 
(2,701
)
 
6,821

 
(407
)
     Foreign currency translation adjustments
 
6,754

 
1,234

 
1,671

          Other comprehensive income
 
4,053

 
8,055

 
1,264

Total comprehensive income
 
$
86,312

 
$
70,144

 
$
90,520

The accompanying notes are an integral part of these consolidated financial statements.


43

Table of Contents

PLEXUS CORP. AND SUBSIDIARIES
CONSOLIDATED BALANCE SHEETS
as of September 28, 2013 and September 29, 2012
(in thousands, except per share data)
 
 
2013
 
2012
ASSETS
 
 
 
 
Current assets:
 
 
 
 
Cash and cash equivalents
 
$
341,865

 
$
297,619

Accounts receivable, net of allowances of $1,008 and $1,011, respectively
 
305,350

 
323,210

Inventories
 
404,020

 
457,691

Deferred income taxes
 
3,917

 
5,500

Prepaid expenses and other
 
23,870

 
15,785

 
 
 
 
 
Total current assets
 
1,079,022

 
1,099,805

 
 
 
 
 
Property, plant and equipment, net
 
325,061

 
265,191

Deferred income taxes
 
2,510

 
4,335

Other
 
41,091

 
42,136

 
 
 
 
 
Total assets
 
$
1,447,684

 
$
1,411,467

 
 
 
 
 
LIABILITIES AND SHAREHOLDERS’ EQUITY
 
 
 
 
Current liabilities:
 
 
 
 
Current portion of long-term debt and capital lease obligations
 
$
3,574

 
$
10,211

Accounts payable
 
313,404

 
341,276

Customer deposits
 
69,295

 
36,384

Accrued liabilities:
 
 
 
 
Salaries and wages
 
42,553

 
45,450

Other
 
42,550

 
46,550

 
 
 
 
 
Total current liabilities
 
471,376

 
479,871

 
 
 
 
 
Long-term debt and capital lease obligations, net of current portion
 
257,773

 
260,211

Deferred income taxes
 
2,128

 
3,268

Other liabilities
 
17,106

 
19,095

 
 
 
 
 
Total non-current liabilities
 
277,007

 
282,574

 
 
 
 
 
Commitments and contingencies
 
 
 
 
 
 
 
 
 
Shareholders’ equity:
 
 
 
 
Preferred stock, $.01 par value, 5,000 shares authorized, none issued or outstanding
 

 

Common stock, $.01 par value, 200,000 shares authorized, 49,176 and 48,851 shares issued, respectively, and 33,600 and 35,097 shares outstanding, respectively
 
492

 
489

Additional paid-in capital
 
449,368

 
435,546

Common stock held in treasury, at cost, 15,576 and 13,754 shares, respectively
 
(449,968
)
 
(400,110
)
Retained earnings
 
679,172

 
596,913

Accumulated other comprehensive income
 
20,237

 
16,184

Total shareholders’ equity
 
699,301

 
649,022

 
 
 
 
 
Total liabilities and shareholders’ equity
 
$
1,447,684

 
$
1,411,467


The accompanying notes are an integral part of these consolidated financial statements.



44

Table of Contents

PLEXUS CORP. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY
for the fiscal years ended September 28, 2013September 29, 2012 and October 1, 2011
(in thousands)
 
 
 
Common Stock
 
 
 
 
 
 
 
Accumulated
Other
 
 
 
 
Shares
 
Amount
 
Additional
Paid-In Capital
 
Treasury
Stock
 
Retained
Earnings
 
Comprehensive
Income
 
Total
Balances, October 2, 2010
 
40,403

 
$
478

 
$
399,054

 
$
(200,110
)
 
$
445,568

 
$
6,865

 
$
651,855

Net income
 

 

 

 

 
89,256

 

 
89,256

Other comprehensive income
 

 

 

 

 

 
1,264

 
1,264

Treasury shares purchased
 
(6,308
)
 

 

 
(200,000
)
 

 

 
(200,000
)
Stock-based compensation expense
 

 

 
11,041

 

 

 

 
11,041

Exercise of stock options, including tax benefits
 
449

 
5

 
5,461

 

 

 

 
5,466

Balances, October 1, 2011
 
34,544

 
483

 
415,556

 
(400,110
)
 
534,824

 
8,129

 
558,882

Net income
 

 

 

 

 
62,089

 

 
62,089

Other comprehensive income
 

 

 

 

 

 
8,055

 
8,055

Treasury shares purchased
 

 

 

 

 

 

 

Stock-based compensation expense
 

 

 
12,535

 

 

 

 
12,535

Exercise of stock options, including tax benefits
 
553

 
6

 
7,455

 

 

 

 
7,461

Balances, September 29, 2012
 
35,097

 
489

 
435,546

 
(400,110
)
 
596,913

 
16,184

 
649,022

Net income
 

 

 

 

 
82,259

 

 
82,259

Other comprehensive income
 

 

 

 

 

 
4,053

 
4,053

Treasury shares purchased
 
(1,822
)
 

 

 
(49,858
)
 

 

 
(49,858
)
Stock-based compensation expense
 

 

 
11,782

 

 

 

 
11,782

Exercise of stock options, including tax benefits
 
325

 
3

 
2,040

 

 

 

 
2,043

Balances, September 28, 2013
 
33,600

 
$
492

 
$
449,368

 
$
(449,968
)
 
$
679,172

 
$
20,237

 
$
699,301


The accompanying notes are an integral part of these consolidated financial statements.

45

Table of Contents

PLEXUS CORP. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOWS
for the fiscal years ended September 28, 2013September 29, 2012 and October 1, 2011
(in thousands)
 
 
2013
 
2012
 
2011
Cash flows from operating activities
 
 
 
 
 
Net income
$
82,259

 
$
62,089

 
$
89,256

Adjustments to reconcile net income to net cash flows from operating activities:
 
 
 
 
 
Depreciation
47,410

 
47,918

 
46,634

Amortization of intangibles
2,066

 
1,296

 

Loss (gain) on sale of property, plant and equipment
104

 
(1,353
)
 
(175
)
Deferred income taxes
(1,773
)
 
23,758

 
(3,028
)
Stock-based compensation expense
11,782

 
12,535

 
11,041

Changes in operating assets and liabilities, excluding effects of acquisitions:
 
 
 
 
 
Accounts receivable
19,657

 
(38,577
)
 
28,551

Inventories
55,193

 
24,105

 
38,152

Prepaid expenses and other
(8,888
)
 
(9,784
)
 
322

Accounts payable
(28,490
)
 
34,314

 
(60,705
)
Customer deposits
32,712

 
5,485

 
3,332

Accrued liabilities and other
(4,385
)
 
(4,283
)
 
5,071

Cash flows provided by operating activities
207,647

 
157,503

 
158,451

Cash flows from investing activities
 
 
 
 
 
Payments for property, plant and equipment
(108,122
)
 
(63,697
)
 
(70,819
)
Proceeds from sales of property, plant and equipment
873

 
3,670

 
2,145

Sale of long-term investments

 
2,000

 

Payments for business acquisition, net of cash acquired

 
(34,155
)
 

Cash flows used in investing activities
(107,249
)
 
(92,182
)
 
(68,674
)
Cash flows from financing activities
 
 
 
 
 
Proceeds from debt issuance, net of deferred finance costs
30,000

 
89,082

 
175,000

Payments on debt and capital lease obligations
(41,018
)
 
(107,354
)
 
(17,420
)
Repurchases of common stock
(49,858
)
 

 
(200,000
)
Proceeds from exercise of stock options
3,778

 
6,820

 
6,000

Minimum tax withholding related to vesting of restricted stock
(350
)
 
(1,373
)
 
(534
)
Income tax benefit of stock option exercises

 
2,014

 

Cash flows used in financing activities
(57,448
)
 
(10,811
)
 
(36,954
)
Effect of exchange rate changes on cash and cash equivalents
1,296

 
1,002

 
1,040

Net increase in cash and cash equivalents
44,246

 
55,512

 
53,863

Cash and cash equivalents:
 
 
 
 
 
Beginning of period
297,619

 
242,107

 
188,244

End of period
$
341,865

 
$
297,619

 
$
242,107

The accompanying notes are an integral part of these consolidated financial statements.




46

Table of Contents
Plexus Corp.
Notes to Consolidated Financial Statements



1.    Description of Business and Significant Accounting Policies
Description of Business:  Plexus Corp. and its subsidiaries (together “Plexus” or the “Company”) participate in the Electronic Manufacturing Services (“EMS”) industry. Plexus delivers optimized Product Realization solutions through a unique Product Realization Value Stream services model. This customer focused services model seamlessly integrates innovative product conceptualization, design, commercialization, manufacturing, fulfillment and sustaining services to deliver comprehensive end-to-end solutions for customers in the Americas ("AMER"), Europe, Middle East, and Africa ("EMEA"), and Asia-Pacific ("APAC") regions. Customer service is provided to over 140 branded product companies in the Networking/Communications, Healthcare/Life Sciences, Industrial/Commercial and Defense/Security/Aerospace market sectors. The Company's customers’ products typically require exceptional production and supply-chain flexibility, necessitating an optimized demand-pull-based manufacturing and supply chain solution across an integrated global platform. Many of the Company's customers’ products require complex configuration management and direct order fulfillment to their customers across the globe. In such cases Plexus provides global logistics management and after-market service and repair. The Company's customers’ products may have stringent requirements for quality, reliability and regulatory compliance. Plexus offers its customers the ability to outsource all phases of product realization, including product specifications; development, design and design verification; regulatory compliance support; prototyping and new product introduction; manufacturing test equipment development; materials sourcing, procurement and supply-chain management; product assembly/manufacturing, configuration and test; order fulfillment, logistics and service/repair.
Consolidation Principles and Basis of Presentation:  The consolidated financial statements have been prepared in accordance with generally accepted accounting principles and include the accounts of Plexus Corp. and its subsidiaries. All intercompany transactions have been eliminated.
The Company’s fiscal year ends on the Saturday closest to September 30. The Company also uses a “4-4-5” weekly accounting system for the interim periods in each quarter. Each quarter, therefore, ends on a Saturday at the end of the 4-4-5 period. Periodically, an additional week must be added to the fiscal year to re-align with the Saturday closest to September 30. The accounting years for fiscal 2013, 2012 and 2011 each included 364 days.
The Company’s reportable segments consist of the AMER, APAC and EMEA segments. Refer to Note 12, "Reportable Segments, Geographic Information and Major Customers," for further details on reportable segments.
Cash and Cash Equivalents:  Cash equivalents are highly liquid investments purchased with an original maturity of less than three months and are classified as Level 1 in the fair level hierarchy described below. As of September 28, 2013 and September 29, 2012, cash and cash equivalents were the following (in thousands):
 
 
2013
 
2012
Cash
 
$
157,988

 
$
124,648

Money market funds and other
 
183,877

 
172,971

 
 
$
341,865

 
$
297,619

Inventories:  Inventories are valued at the lower of cost or market. Cost is determined by the first-in, first-out (“FIFO”) method. Valuing inventories at the lower of cost or market requires the use of estimates and judgment. Customers may cancel their orders, change production quantities or delay production for a number of reasons that are beyond the Company’s control. Any of these, or certain additional actions, could impact the valuation of inventory. Any actions taken by the Company’s customers that could impact the value of its inventory are considered when determining the lower of cost or market valuations.
Per contractual terms, customer deposits are received by the Company to offset obsolete and excess inventory risks.

47

Table of Contents
Plexus Corp.
Notes to Consolidated Financial Statements


Property, Plant and Equipment and Depreciation:  These assets are stated at cost. Depreciation, determined on the straight-line method, is based on lives assigned to the major classes of depreciable assets as follows: 
Buildings and improvements
 
15-50 years
Machinery and equipment
 
3-10 years
Computer hardware and software
 
3-10 years
Certain facilities and equipment held under capital leases are classified as property, plant and equipment and amortized using the straight-line method over the lease terms and the related obligations are recorded as liabilities. Lease amortization is included in depreciation expense (see Note 4, "Property, Plant and Equipment") and the financing component of the lease payments is classified as interest expense.
For the capitalization of software costs, the Company capitalizes significant costs incurred in the acquisition or development of software for internal use. This includes costs of both the software and the consultants, as well as payroll and payroll-related costs for employees directly involved in developing internal use computer software once the final selection of the software is made. Costs incurred prior to the final selection of software and costs not qualifying for capitalization are expensed as incurred.
Expenditures for maintenance and repairs are expensed as incurred.
Impairment of Long-Lived Assets:  Long-lived assets, including property, plant and equipment and intangible assets with finite lives are reviewed for impairment and written down to fair value when facts and circumstances indicate that the carrying value of long-lived assets may not be recoverable through estimated future undiscounted cash flows. If an impairment has occurred, a write-down to estimated fair value is made and the impairment loss is recognized as a charge against current operations. The impairment analysis is based on management’s assumptions, including future revenue and cash flow projections. Circumstances that may lead to impairment of property, plant and equipment and intangible assets with finite lives include reduced expectations for future performance or industry demand and possible further restructurings, among others.
Revenue Recognition:  Net sales from manufacturing services are recognized when the product has been shipped, the risk of ownership has transferred to the customer, the price to the buyer is fixed or determinable, and recoverability is reasonably assured. This point depends on contractual terms and generally occurs upon shipment of the goods from Plexus. Generally, there are no formal customer acceptance requirements or further obligations related to manufacturing services; if such requirements or obligations exist, then a sale is recognized at the time when such requirements are completed and such obligations are fulfilled.
Net sales from engineering design and development services, which are generally performed under contracts with a duration of twelve months or less, are typically recognized as program costs are incurred utilizing the proportional performance model. The completed performance model is used if certain customer acceptance criteria exist. Any losses are recognized when anticipated. Net sales from engineering design and development services were less than five percent of total sales for each of fiscal 2013, 2012 and 2011.
Sales are recorded net of estimated returns of manufactured products based on management’s analysis of historical returns, current economic trends and changes in customer demand. Net sales also include amounts billed to customers for shipping and handling. The corresponding shipping and handling costs are included in cost of sales.
Income Taxes:  Deferred income taxes are provided for the difference between the financial statement balance of assets and liabilities and their respective tax basis. The Company records a valuation allowance against deferred income tax assets when management believes it is more likely than not that some portion or all of the deferred income tax assets will not be realized (see Note 7, "Income Taxes"). Realization of deferred income tax assets in each of the Company's tax jurisdictions is dependent on the Company’s ability to generate future taxable income in these jurisdictions. Recognition of deferred income tax assets is evaluated and tax reserves are recorded to address potential exposures related to income tax positions taken by the Company. These reserves are based on the assumptions and past experiences of the Company and provide for the uncertainty surrounding the application of statutes, rules, regulations, and interpretations to its income tax filings. It is possible that the actual costs or benefits relating to these matters may be materially more or less than the amount the Company estimated.
Foreign Currency Translation:  The Company translates assets and liabilities of subsidiaries operating outside of the U.S. with a functional currency other than the U.S. dollar into U.S. dollars using exchange rates in effect at year-end. The Company translates net sales, expenses and cash flows at the average monthly exchange rates during the respective periods. Adjustments resulting from translation of the financial statements are recorded as a component of “Accumulated other comprehensive income”. Exchange gains and losses arising from transactions denominated in a currency other than the functional currency of

48

Table of Contents
Plexus Corp.
Notes to Consolidated Financial Statements


the entity involved and remeasurement adjustments for foreign operations where the U.S. dollar is the functional currency are included in our Consolidated Statements of Comprehensive Income as a component of miscellaneous income (expense). Exchange (losses) gains on foreign currency transactions were $(1.2) million, $0.2 million, and $1.0 million for fiscal 2013, 2012 and 2011, respectively.
Derivatives:  All derivatives are recognized on the balance sheet at their fair market value. The Company periodically enters into forward currency exchange contracts and interest rate swaps. On the date a derivative contract is entered into, the Company designates the derivative as a hedge of a recognized asset or liability (a “fair value” hedge), a hedge of a forecasted transaction or of the variability of cash flows to be received or paid related to a recognized asset or liability (a “cash flow” hedge), or a hedge of the net investment in a foreign operation. The Company does not enter into derivatives for speculative purposes. Changes in the fair value of a derivative that qualifies as a fair value hedge are recorded in earnings along with the gain or loss on the hedged asset or liability. Changes in the fair value of a derivative that qualifies as a cash flow hedge are recorded in “Accumulated other comprehensive income” within shareholders’ equity, until earnings are affected by the variability of cash flows. Changes in the fair value of a derivative used to hedge the net investment in a foreign operation are recorded in “Accumulated other comprehensive income” within shareholders’ equity. The Company's interest rate swaps and certain forward currency exchange contracts are treated as cash flow hedges and, therefore, $(2.7) million, $6.8 million and $(0.4) million were recorded in “Accumulated other comprehensive income” for fiscal 2013, 2012 and 2011, respectively.
Grants from Government Authorities: Grants from governments are recognized at their fair value where there is reasonable assurance that the grant funds will be received and the Company will comply with all attached conditions to the grant.
Government grants relating to property, plant and equipment are recorded as an offset to the carrying value of the related assets at the time of capitalization. Government grants relating to other costs incurred are recognized as an offset to those related costs, for which the grants are intended to compensate for, at the time they are recognized.
Earnings Per Share:  The computation of basic earnings per common share is based upon the weighted average number of common shares outstanding and net income. The computation of diluted earnings per common share reflects additional dilution from stock options and restricted stock, excluding any with an antidilutive effect.
Stock-based Compensation:  The Company measures all share-based payments to employees, including grants of employee stock options, at fair value and expenses them in the Consolidated Statements of Comprehensive Income over the service period (generally the vesting period) of the grant.
Comprehensive Income:  The Company follows the established standards for reporting comprehensive income, which is defined as the changes in equity of an enterprise except those resulting from shareholder transactions.
Accumulated other comprehensive income consists of the following as of September 28, 2013 and September 29, 2012 (in thousands): 
 
 
2013
 
2012
Foreign currency translation adjustments
 
$
19,448

 
$
12,694

Cumulative change in fair market value of derivative instruments, net of tax
 
789

 
3,490

Accumulated other comprehensive income
 
$
20,237

 
$
16,184

The change in fair market value of derivative instruments, net of tax adjustment that is recorded to “Accumulated other comprehensive income” is more fully explained in Note 6, "Derivatives and Fair Value Measurements."
Conditional Asset Retirement Obligations:  The Company recognizes a liability for the fair value of a conditional asset retirement obligation if the fair value can be reasonably estimated even though uncertainty exists about the timing and/or method of settlement. The liability is adjusted for any additions or deletions of related property, plant and equipment.
Use of Estimates:  The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America ("GAAP") requires management to make estimates and assumptions that affect the amounts reported in the financial statements and accompanying notes. Actual results could differ from those estimates.
Fair Value of Financial Instruments:  Accounts payable and accrued liabilities are reflected in the consolidated financial statements at cost because of the short-term duration of these instruments. Accounts receivable are reflected at net realizable value based on anticipated losses due to potentially uncollectible balances. Anticipated losses were based on management’s analysis of historical losses and changes in customers’ credit status. The fair value of capital lease obligations was approximately $12.2 million and $13.7 million as of September 28, 2013 and September 29, 2012, respectively. The fair value

49

Table of Contents
Plexus Corp.
Notes to Consolidated Financial Statements


of the Company’s long-term debt was $246.8 million and $256.8 million as of September 28, 2013 and September 29, 2012, respectively. The Company uses quoted market prices when available or discounted cash flows to calculate fair value. If measured at fair value in the financial statements, long-term debt and capital lease obligations (including the current portion) would be classified as Level 2 in the fair value hierarchy described below. The fair values of the Company’s derivatives are disclosed in Note 6, "Derivatives and Fair Value Measurements."
 
Fair value is defined as the exchange price that would be received for an asset or paid to transfer a liability (or exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. Valuation techniques used to measure fair value must maximize the use of observable inputs and minimize the use of unobservable inputs. The accounting guidance establishes a fair value hierarchy based on three levels of inputs that may be used to measure fair value. The input levels are:
Level 1:  Quoted (observable) market prices in active markets for identical assets or liabilities.
Level 2:  Inputs other than Level 1 that are observable, such as quoted prices for similar assets or liabilities; quoted prices in markets that are not active; or other inputs that are observable or can be corroborated by observable market data for substantially the full term of the asset or liability.
Level 3:  Unobservable inputs that are supported by little or no market activity and that are significant to the fair value of the asset or liability.
Business and Credit Concentrations:  Financial instruments that potentially subject the Company to concentrations of credit risk consist of cash, cash equivalents, trade accounts receivable and derivative instruments, specifically related to counterparties. In accordance with the Company’s investment policy, the Company’s cash, cash equivalents and derivative instruments were placed with recognized financial institutions. The Company’s investment policy limits the amount of credit exposure in any one issue and the maturity date of the investment securities that typically comprise investment grade short-term debt instruments. Concentrations of credit risk in accounts receivable resulting from sales to major customers are discussed in Note 12, "Reportable Segments, Geographic Information and Major Customers." The Company, at times, requires advanced cash deposits for services performed. The Company also closely monitors extensions of credit.
New Accounting Pronouncements:  In July 2013, the Financial Accounting Standards Board (“FASB”) issued new guidance for unrecognized tax benefits that exist along with a net operating loss carryforward, a similar tax loss, or a tax credit carryforward. The guidance requires an entity to present an unrecognized tax benefit as a reduction of a deferred tax asset for an net operating loss ("NOL") carryforward, or similar tax loss or tax credit carryforward, rather than as a liability when (1) the uncertain tax position would reduce the NOL or other carryforward under the tax law of the applicable jurisdiction and (2) the entity intends to use the deferred tax asset for that purpose. This guidance is effective prospectively for fiscal years, and interim periods within those years, beginning after December 15, 2013. Early adoption and retrospective application are permitted. The adoption of this guidance is not expected to have a material impact on the Company's consolidated financial statements.
In July 2013, the FASB issued amended guidance that permits the Fed Funds Effective Swap Rate ("OIS") to be used as a U.S. benchmark interest rate for hedge accounting purposes, in addition to Treasury obligations of the U.S. government ("UST") and the London Interbank Offered Rate ("LIBOR"). The amendments also remove the restriction on using different benchmark rates for similar hedges. This update is effective prospectively for qualifying new or redesignated hedging relationships entered into on or after July 17, 2013. The adoption of this guidance is not expected to have a material impact on the Company's consolidated financial statements or results of operations.
In March 2013, the FASB issued amended guidance for cumulative translation adjustments upon derecognition of certain subsidiaries or groups of assets within a foreign entity or of an investment in a foreign entity. These amendments provide guidance on releasing cumulative translation adjustments when a reporting entity ceases to have a controlling financial interest in a subsidiary or group of assets that is a nonprofit activity or a business within a foreign entity.  In addition, these amendments provide guidance on the release of cumulative translation adjustment in partial sales of equity method investments and in step acquisitions.  The amendments are effective on a prospective basis for fiscal years and interim reporting periods within those years, beginning after December 15, 2013. Early adoption is permitted. The adoption of this guidance is not expected to have a material impact on the Company's consolidated financial statements.
In February 2013, the FASB issued guidance that requires entities to present the changes in the components of accumulated other comprehensive income. Entities are required to present separately the amount of the change that is due to reclassifications, and the amount that is due to current period other comprehensive income. These changes may be shown before or net of tax, and displayed either on the face of the financial statements or in the footnotes. Public entities are required to comply with the standard for annual and interim periods starting with the first interim period in the fiscal period beginning

50

Table of Contents
Plexus Corp.
Notes to Consolidated Financial Statements


after December 15, 2012. The Company adopted this guidance as of the second fiscal quarter of 2013 with no impact to the Company's consolidated financial position, results of operations or cash flows, as the guidance only related to the presentation of the Company's financial statement disclosures.
In January 2013, the FASB issued a clarification of its previous amendment to disclosures about offsetting assets and liabilities. The clarification stated which instruments and transactions are subject to the original amendment requiring an entity to disclose information about offsetting and related arrangements to enable users of its financial statements to understand the effects of those arrangements on its financial position. Public entities are required to apply the amendment for annual reporting periods beginning on or after January 1, 2013, and interim periods within those annual periods. An entity should provide the disclosures required by those amendments retrospectively for all comparative periods presented. This guidance will be effective for the Company's 2014 fiscal year and is not expected to have an impact on the Company's consolidated financial position, results of operations or cash flows, as the guidance only relates to the presentation of the Company's financial statement disclosures.
In June 2011, the FASB issued an amendment to comprehensive income guidance, which eliminates the option to present other comprehensive income and its components in the statement of shareholders’ equity. The Company can elect to report components of comprehensive income in either (1) a continuous statement of comprehensive income or (2) two separate but consecutive statements. This guidance is effective for financial statements issued for fiscal years, and interim periods within those years, beginning after December 15, 2011. The Company adopted this guidance as of the first fiscal quarter of 2013 with no impact to the Company's consolidated financial position, results of operations or cash flows, as the guidance only related to the presentation of the Company's financial statement disclosures.
Reclassifications: Long-term deferred income tax liabilities in fiscal 2012, in the amount of $3.3 million, were reclassified from short-term deferred income tax assets to conform to current year presentation on the Consolidated Balance Sheets.
2.    Business Combination

In January 2012, Plexus and Kontron AG (“Kontron”) entered into a strategic manufacturing arrangement, and completed the related asset purchase transaction described below. Under this arrangement, Kontron transitioned all manufacturing of its Kontron Design Manufacturing Services (M) Sdn. Bhd. subsidiary (“KDMS”) located in Penang, Malaysia to Plexus facilities in Penang. Plexus acquired the inventory and equipment of KDMS for an adjusted purchase price of $34.2 million, reflecting certain post-closing adjustments, which was paid with cash on-hand, and hired substantially all of KDMS's employees. No real estate was included in this transaction. This transaction was accounted for as a business combination. The purchase price was allocated primarily to inventory and equipment. An identifiable intangible asset of $4.0 million related to a customer relationship was recorded within other non-current assets in the Company's accompanying Consolidated Balance Sheets as a result of the arrangement and is being amortized on a straight-line basis over a two year period. Assuming this transaction had been made at the beginning of any period presented, the consolidated pro forma results would not have been materially different from reported results.


3.    Inventories
Inventories as of September 28, 2013 and September 29, 2012 consisted of (in thousands):
 
 
 
2013
 
2012
Raw materials
 
$
288,559

 
$
337,657

Work-in-process
 
57,883

 
47,182

Finished goods
 
57,578

 
72,852

 
 
$
404,020

 
$
457,691

Per contractual terms, customer deposits are received by the Company to offset obsolete and excess inventory risks. The total amount of customer deposits related to inventory and included within current liabilities on the accompanying Consolidated Balance Sheets as of September 28, 2013 and September 29, 2012 was $51.6 million and $34.8 million, respectively. Approximately $11.0 million of the inventory customer deposit balance as of September 28, 2013 relates to Juniper Networks, Inc. ("Juniper"), which disengaged from the Company in fiscal 2013.

4.    Property, Plant and Equipment
Property, plant and equipment as of September 28, 2013 and September 29, 2012 consisted of (in thousands):

51

Table of Contents
Plexus Corp.
Notes to Consolidated Financial Statements


 
 
2013
 
2012
Land, buildings and improvements
 
$
212,195

 
$
170,557

Machinery and equipment
 
312,941

 
295,548

Computer hardware and software
 
91,565

 
85,433

Construction in progress
 
67,518

 
39,894

 
 
684,219

 
591,432

Less: accumulated depreciation
 
359,158

 
326,241

 
 
$
325,061

 
$
265,191

The major component of the construction in progress balance is related to the footprint expansion in Neenah, Wisconsin.
Assets held under capital leases and included in property, plant and equipment as of September 28, 2013 and September 29, 2012 consisted of (in thousands): 
 
 
2013
 
2012
Buildings and improvements
 
$
23,147

 
$
23,009

Machinery and equipment
 
3,294

 
1,873

 
 
26,441

 
24,882

Less: accumulated amortization
 
16,513

 
13,909

 
 
$
9,928

 
$
10,973

The building and improvements category in the above table includes a leased manufacturing facility in San Diego, California, which is no longer used by the Company. The Company has subleased the facility. The San Diego facility is recorded at the net present value of the sublease income, net of cash outflows for broker commissions and building improvements associated with the subleases. The net book value of the San Diego facility is reduced on a monthly basis by the amortization of the sublease cash receipts, net of certain cash outflows associated with the subleases. The net book value of the San Diego facility is approximately $6.5 million as of September 28, 2013.
Amortization of assets held under capital leases totaled $0.6 million, $0.8 million, and $0.9 million for fiscal 2013, 2012 and 2011, respectively. There was $1.4 million of capital lease additions for fiscal 2013 and $0.1 million for fiscal 2012. There were no such additions for fiscal 2011.
 
As of September 28, 2013, September 29, 2012 and October 1, 2011, accounts payable included approximately $10.9 million, $11.5 million and $12.3 million, respectively, related to the purchase of property, plant and equipment, which have been treated as non-cash transactions for purposes of the Consolidated Statements of Cash Flows.
 
5.    Debt, Capital Lease Obligations and Other Financing
Debt and capital lease obligations as of September 28, 2013 and September 29, 2012, consisted of (in thousands):
 
 
2013
 
2012
Debt:
 
 
 
 
Borrowings under term loan, expiring on May 15, 2017, interest rate of LIBOR plus 1.13%. See also Note 6, "Derivatives and Fair Value Measurements."
 
$
75,000

 
$
82,500

Borrowings under senior notes, expiring on June 15, 2018, interest rate of 5.20%. See also Note 6, "Derivatives and Fair Value Measurements."
 
175,000

 
175,000

Capital lease:
 
 
 
 
Capital lease obligations for equipment and facilities located in San Diego and Xiamen, China, expiring on various dates through 2017; weighted average interest rate of 9.3% for fiscal 2013 and 10.3% for fiscal 2012, respectively.
 
11,347

 
12,922

Less: current portion
 
(3,574
)
 
(10,211
)
Long-term debt and capital lease obligations, net of current portion
 
$
257,773

 
$
260,211

The aggregate scheduled maturities of the Company’s debt obligations as of September 28, 2013, are as follows (in thousands):

52

Table of Contents
Plexus Corp.
Notes to Consolidated Financial Statements


2014
$

2015

2016

2017
75,000

2018
175,000

Thereafter

 
 
Total
$
250,000


The aggregate scheduled maturities of the Company’s obligations under capital leases as of September 28, 2013, are as follows (in thousands):
2014
$
4,550

2015
4,595

2016
3,197

2017
689

2018

Thereafter

 
 
 
13,031

Less: interest portion of capital leases
(1,684
)
 
 
Total
$
11,347

On May 15, 2012, the Company entered into a five-year, $250 million senior unsecured credit facility that terminates on May 15, 2017 (the “Credit Facility”). The Credit Facility includes a $160 million revolving credit facility and a $90 million term loan. The revolving credit facility may be increased by $100 million (the "increase option") to $260 million generally by mutual agreement of the Company, the lenders, the letter of credit issuers and the administrative agent named in the related credit agreement (the "Credit Agreement"), subject to certain customary conditions. The Credit Facility was used to refinance the Company's then-existing $100 million senior unsecured revolving credit facility (no amounts were outstanding at that time) and its $150 million senior unsecured term loan (balance of $90.0 million as of May 15, 2012), and for general corporate purposes. Quarterly principal repayments of the Credit Facility term loan of $3.75 million per quarter began June 29, 2012 and ended on March 28, 2013. The final $75.0 million payment is due on May 15, 2017. The Company had term loan borrowings outstanding under the Credit Facility of $75.0 million and $82.5 million as of September 28, 2013 and September 29, 2012, respectively. During fiscal 2013, the Company borrowed and repaid $30.0 million under the revolving credit facility. There were no revolving borrowings under the Credit Facility as of September 28, 2013 and September 29, 2012.
The financial covenants (as defined in the Credit Agreement) require that the Company maintain, as of each fiscal quarter end, a maximum total leverage ratio and a minimum interest coverage ratio. As of September 28, 2013, the Company was in compliance with all financial covenants of the Credit Agreement. Borrowings under the Credit Facility, at the Company's option, bear interest at a defined base rate or the LIBOR rate plus, in each case, an applicable margin based upon the Company's leverage ratio as defined in the Credit Agreement. Rates would increase upon negative changes in specified Company financial metrics and would decrease to no less than LIBOR plus 1.0% or base rate plus 0% upon reduction in the current total leverage ratio. As of September 28, 2013, the Company had a borrowing rate of LIBOR plus 1.13%. As of September 28, 2013, all outstanding debt under the Credit Facility is at a fixed interest rate as a result of the interest rate swap contract discussed in Note 6, "Derivatives and Fair Value Measurements." There is no floating rate debt outstanding under the Credit Facility as of September 28, 2013. The Company is also required to pay an annual commitment fee on the unused revolver credit commitment based on the Company's leverage ratio; the fee was 0.2% as of September 28, 2013.

In the second quarter of fiscal 2012, the Company incurred approximately $0.9 million in new debt issuance costs in connection with the new Credit Facility, which are being amortized over the five-year term of the Credit Facility.
The Company also has outstanding 5.20% Senior Notes, due on June 15, 2018 (the “Notes”); $175 million principal of the Notes was outstanding as of both September 28, 2013 and September 29, 2012. At September 28, 2013, the Company was in compliance with all financial covenants relating to the Notes, which are consistent with those in the Credit Agreement discussed above.

53

Table of Contents
Plexus Corp.
Notes to Consolidated Financial Statements


Cash paid for interest in fiscal 2013, 2012 and 2011 was $12.9 million, $16.4 million and $8.6 million, respectively. 

6.    Derivatives and Fair Value Measurements
All derivatives are recognized in the accompanying Consolidated Balance Sheets at their estimated fair values. The Company currently has cash flow hedges related to variable rate debt and forecasted foreign currency payments. The Company also enters into forward currency exchange contracts from time to time to manage foreign currency exchange rate exposures associated with certain foreign currency denominated assets and liabilities. The Company does not enter into derivatives for speculative purposes. Changes in the fair value of the derivatives that qualify as cash flow hedges are recorded in “Accumulated other comprehensive income” in the accompanying Consolidated Balance Sheets until earnings are affected by the variability of the cash flows. There were no forward currency exchange contracts outstanding related to foreign currency denominated assets and liabilities at September 28, 2013.
The Company enters into forward currency exchange contracts on a rolling basis. These contracts had a total notional value of $71.0 million as of September 28, 2013. These forward currency contracts fix the exchange rates for the settlement of future foreign currency obligations that have yet to be realized. The total fair value of the forward currency exchange contracts was a $1.0 million liability as of September 28, 2013, and a $1.1 million asset as of September 29, 2012.
On June 4, 2013, the Company entered into an interest rate swap contract to replace the three interest rate swap contracts that matured on April 4, 2013, as described below. The new interest rate swap contract is related to the $75.0 million term loan under the Company's Credit Facility. This interest rate swap pays the Company variable interest at the one month LIBOR rate, and the Company pays the counterparty a fixed interest rate. The fixed interest rate for the contract is 0.875%. Based on the terms of the interest rate swap contract and the underlying debt, the interest rate contract was determined to be effective, and thus qualifies as a cash flow hedge. As such, any changes in the fair value of the interest rate swap are recorded in "Accumulated other comprehensive income" on the accompanying Condensed Consolidated Balance Sheets until earnings are affected by the variability of cash flows. The total fair value of the interest rate swap contract was a $0.03 million asset as of September 28, 2013. As of September 28, 2013, the notional amount of the Company's interest rate swap was $75.0 million.
The Company entered into three interest rate swap contracts related to the term loans under its prior credit facility that had an initial total notional value of $150 million and matured on April 4, 2013, which resulted in a $2.0 million discrete tax benefit in fiscal 2013. The fixed interest rates for each of these contracts were 4.415%, 4.490% and 4.435%, respectively. These interest rate swap contracts were originally entered into to convert $150 million of the variable rate term loan under the prior credit facility into fixed rate debt. Based on the terms of the interest rate swap contracts and the underlying debt, these interest rate contracts were determined to be effective, and thus qualified as a cash flow hedge. As such, any changes in the fair value of these interest rate swaps were recorded in “Accumulated other comprehensive income” on the accompanying Condensed Consolidated Balance Sheets until earnings were affected by the variability of cash flows. The total fair value of these interest rate swap contracts was a $1.7 million liability as of September 29, 2012.
The tables below present information regarding the fair values of derivative instruments (as defined in Note 1, "Description of Business and Significant Accounting Policies") and the effects of derivative instruments on the Company’s Consolidated Financial Statements:
 
Fair Values of Derivative Instruments
In thousands of dollars
  
 
Asset Derivatives
 
Liability Derivatives
  
 
  
 
September 28,
2013
 
September 29,
2012
 
  
 
September 28,
2013
 
September 29,
2012
Derivatives designated
as hedging instruments
 
Balance Sheet
Location
 
Fair Value
 
Fair Value
 
Balance Sheet
Location
 
Fair Value
 
Fair Value
Interest rate swaps
 
Prepaid expenses and other
 
$34
 
$—
 
Current liabilities –
Other
 
$—
 
$1,715
Forward contracts
 
Prepaid expenses and other
 
$—
 
$1,095
 
Current liabilities –
Other
 
$999
 
$—
 

54

Table of Contents
Plexus Corp.
Notes to Consolidated Financial Statements


 
The Effect of Derivative Instruments on the Statements of Comprehensive Income
 
for the Twelve Months Ended
In thousands of dollars
Derivatives    
in Cash Flow    
Hedging    
Relationships    
Amount of Gain or  
(Loss) Recognized in  
Other Comprehensive  
Income (“OCI”) on  
Derivative (Effective  
Portion)  
Location of Gain or (Loss) Reclassified from Accumulated OCI into Income (Effective Portion)
Amount of Gain or
(Loss) Reclassified from
Accumulated OCI into
Income (Effective
Portion)
Location of Gain or (Loss) Recognized in Income on Derivative (Ineffective Portion    
and Amount Excluded from Effectiveness    
Testing)
Amount of Gain or (Loss) Recognized in
Income on Derivative(Ineffective Portion and
Amount Excluded from Effectiveness Testing)
  
September 28, 2013
 
September 29, 2012
  
September 28, 2013
 
September 29, 2012
  
September 28, 2013
 
September 29, 2012
Interest rate swaps
$961
 
$(40)
Interest income
(expense)
$(788)
 
$(3,564)
Other income
(expense)
$—
 
$—
Forward contracts
$(1,389)
 
$3,021
Selling and
administrative
expenses
$709
 
$(597)
Other income
(expense)
$—
 
$—
Treasury Rate Locks
$—
 
$—
Interest income
(expense)
$321
 
$320
Other income
(expense)
$—
 
$—
Income Tax (Benefit) Expense
$—
 
$—
Income Tax (Benefit) Expense
$2,031
 
$—
Income Tax (Benefit) Expense
$—
 
$—


55

Table of Contents
Plexus Corp.
Notes to Consolidated Financial Statements


The following table lists the fair values of assets/(liabilities) of the Company’s derivatives as of September 28, 2013, by input level as defined in Note 1, "Description of Business and Significant Accounting Policies":
  
 
 
Fair Value Measurements Using Input Levels Asset/
(Liability) (in thousands):
 
Fiscal year ended September 28, 2013
 
Level 1
 
 
Level 2
 
 
Level 3
 
 
Total
 
Derivatives
 
 
 
 
 
 
 
 
Interest rate swaps
 
$—
 
$34
 
$—
 
$34
Forward currency forward contracts
 
$—
 
$(999)
 
$—
 
$(999)
 
 
 
 
 
 
 
 
 
Fiscal year ended September 29, 2012
 
 
 
 
 
 
 
 
Derivatives
 
 
 
 
 
 
 
 
Interest rate swaps
 
$—
 
$(1,715)
 
$—
 
$(1,715)
Forward currency forward contracts
 
$—
 
$1,095
 
$—
 
$1,095
The fair value of interest rate swaps and foreign currency forward contracts is determined using a market approach, which includes obtaining directly or indirectly observable values from third parties active in the relevant markets. The primary input in the fair value of the interest rate swaps is the relevant LIBOR forward curve. Inputs in the fair value of the foreign currency forward contracts include prevailing forward and spot prices for currency and interest rate forward curves.

7.    Income Taxes
The domestic and foreign components of income (loss) before income taxes for fiscal 2013, 2012 and 2011 consisted of (in thousands): 
 
 
2013
 
2012
 
2011
U.S.
 
$
(8,406
)
 
$
8,371

 
$
(9,449
)
Foreign
 
93,389

 
82,860

 
101,552

 
 
$
84,983

 
$
91,231

 
$
92,103

Income tax expense (benefit) for fiscal 2013, 2012 and 2011 consisted of (in thousands): 
 
 
2013
 
2012
 
2011
Current:
 
 
 
 
 
 
Federal
 
$
408

 
$

 
$

State
 

 
131

 
3

Foreign
 
4,089

 
5,253

 
5,872

 
 
4,497

 
5,384

 
5,875

Deferred:
 
 
 
 
 
 
Federal
 
(3,702
)
 
18,950

 
(1,649
)
State
 
(42
)
 
4,784

 
(484
)
Foreign
 
1,971

 
24

 
(895
)
 
 
(1,773
)
 
23,758

 
(3,028
)
 
 
$
2,724

 
$
29,142

 
$
2,847

 

56

Table of Contents
Plexus Corp.
Notes to Consolidated Financial Statements


The following is a reconciliation of the federal statutory income tax rate to the effective income tax rates reflected in the Consolidated Statements of Comprehensive Income for fiscal 2013, 2012 and 2011: 
 
 
2013
 
2012
 
2011
 
Federal statutory income tax rate
 
35.0
 %
 
35.0
 %
 
35.0
 %
Increase (decrease) resulting from:
 
 
 
 
 
 
Permanent differences
 

 

 

State income taxes, net of federal income tax
 

 
0.2

 
(0.3
)
Foreign tax rate differences
 
(34.4
)
 
(27.5
)
 
(34.5
)
Valuation reserve for deferred tax assets
 
5.8

 
26.5

 
1.4

Other, net
 
(3.2
)
 
(2.3
)
 
1.5

Effective income tax rate
 
3.2
 %
 
31.9
 %
 
3.1
 %
The Company recorded income tax expense of $2.7 million, $29.1 million and $2.8 million for fiscal 2013, 2012 and 2011, respectively.
The effective tax rate for fiscal 2013 was significantly lower than that of fiscal 2012 but comparable to the fiscal 2011 rate. The increase to the income tax expense recorded in fiscal 2012 as compared to the other periods presented was the result of the Company recording an additional valuation allowance against the U.S. deferred tax assets in fiscal 2012. During the preparation of the fiscal 2012 consolidated financial statements, the Company performed an analysis of all available evidence, both positive and negative, regarding the need for a valuation allowance against our U.S. deferred tax assets, consistent with the provisions of ASC Topic 740, “Income Taxes.” Accordingly, the Company, based on the weight of the available positive and negative evidence, established an additional valuation allowance against the U.S. deferred tax assets, impacting the tax provision by $22.8 million. The total valuation allowance impacting the tax provision for fiscal 2012 was $24.1 million, comprised of the $22.8 million valuation allowance for the U.S. and an additional $1.3 million for operating losses in Germany and Romania.
During the fourth quarter of fiscal 2013, the Company identified and recorded a discrete tax adjustment and placed a full valuation allowance on the net deferred tax assets of the Company's U.K. operations, increasing tax expense by $1.8 million ($0.05 per diluted share). The Company's analysis found that in the fourth quarter, its U.K. operations experienced an unanticipated material decline in sales resulting in a loss in fiscal 2013, which is forecasted to continue into fiscal 2014. While the Company's U.K. operations are expected to regain profitability, the current, forecasted and cumulative losses are substantial negative evidence. Having examined the evidence, both positive and negative, it was determined that it is more likely than not that these deferred tax assets will not be utilized and should have a valuation allowance placed against them.

In the fourth quarter of fiscal 2013 the Company identified and recorded several out-of-period tax errors related to prior fiscal periods that reduced tax expense by $3.2 million ($0.09 per diluted share). These out-of-period adjustments are reflected in the Other, net line of the effective income tax rate schedule above. The Company believes these out-of-period tax errors were not material to the fiscal 2013, or previously issued, financial statements.

57

Table of Contents
Plexus Corp.
Notes to Consolidated Financial Statements


The components of the net deferred income tax asset as of September 28, 2013 and September 29, 2012, consisted of (in thousands):
 
 
2013
 
2012
Deferred income tax assets:
 
 
 
 
Loss/credit carryforwards
 
$
12,985

 
$
12,175

Goodwill
 
1,268

 
2,024

Inventories
 
4,997

 
4,870

Accrued benefits
 
19,428

 
17,768

Allowance for bad debts
 
339

 
322

Interest rate swaps
 

 
664

Other
 
3,304

 
4,735

Total gross deferred income tax assets
 
42,321

 
42,558

Less valuation allowance
 
(34,075
)
 
(27,087
)
Deferred income tax assets
 
8,246

 
15,471

 
Deferred income tax liabilities:
 
 
 
 
Property, plant and equipment
 
3,934

 
7,404

Other
 
13

 
1,500

Deferred income tax liabilities
 
3,947

 
8,904

 
Net deferred income tax asset
 
$
4,299

 
$
6,567


During fiscal 2013, the Company’s valuation allowance increased by $7.0 million as a result of increases to the valuation allowance against the net deferred tax assets in the U.S. of $2.4 million, the net deferred tax assets in the U.K. of $2.4 million, the net deferred tax assets in Romania of $0.9 million, the net deferred tax assets in Germany of $1.0 million and the net deferred tax assets in China of $0.3 million.
As of September 28, 2013, the Company had approximately $81.6 million of state net operating loss carryforward that expires between fiscal 2014 and 2032, which also has a full valuation allowance against it.
As a result of using the with-and-without method under the requirements for accounting for stock-based compensation, the Company has unrecognized net operating loss carryforward of $2.6 million related to tax deductions in excess of compensation expense for stock options until such time as the related deductions actually reduce income taxes payable.
Cash paid for income taxes in fiscal 2013 and 2012 was $5.3 million and $9.0 million, respectively. Cash refunded for income taxes in fiscal 2011 was $2.2 million.
During the fiscal year ended September 28, 2013, tax legislation was adopted in various jurisdictions. None of these changes are expected to have a material impact on the Company's consolidated financial condition, results of operations or cash flows.

The Company has been granted tax holidays for its Malaysian and Xiamen, China subsidiaries. These tax holidays expire in fiscal 2024 and 2014, respectively, and are subject to certain conditions with which the Company expects to comply. In fiscal 2013, 2012 and 2011, these subsidiaries generated income, which resulted in tax reductions of approximately $22.7 million ($0.66 per basic share), $17.5 million ($0.50 per basic share) and $21.7 million ($0.57 per basic share), respectively.
The Company does not provide for taxes that would be payable if undistributed earnings of foreign subsidiaries were remitted because the Company considers these earnings to be permanently reinvested. The aggregate undistributed earnings of the Company’s foreign subsidiaries for which a deferred income tax liability has not been recorded was approximately $567.3 million as of September 28, 2013. If such earnings were repatriated, additional tax expense may result, although the calculation of such additional taxes is not practicable at this time.




58

Table of Contents
Plexus Corp.
Notes to Consolidated Financial Statements


The Company has approximately $7.4 million of uncertain tax benefits as of September 28, 2013. The Company has classified these amounts in the Consolidated Balance Sheets as “Other liabilities” (noncurrent) to the extent that payment is not anticipated within one year. Presented below is a reconciliation of the beginning and ending amounts of unrecognized income tax benefits (in thousands):
Balance at beginning of fiscal 2012
$
7,360

Gross increases for tax positions of prior years
243

Gross increases for tax positions of the current year

Gross decreases for tax positions of prior years

Settlements

Balance at beginning of fiscal 2013
$
7,603

Gross increases for tax positions of prior years
189

  Gross increases for tax positions of the current year

  Gross decreases for tax positions of prior years
356

Settlements

Balance at September 28, 2013
$
7,436

Approximately $5.3 million and $6.5 million of the balance as of September 28, 2013 and September 29, 2012, respectively, would reduce the Company’s effective tax rate if recognized.
The Company recognizes accrued interest and penalties related to unrecognized tax benefits in income tax expense. The total accrued penalties and net accrued interest with respect to income taxes was approximately $1.1 million, $0.9 million and $0.7 million as of September 28, 2013September 29, 2012 and October 1, 2011, respectively. The Company recognized $0.2 million of expense for accrued penalties and net accrued interest in the Consolidated Statements of Comprehensive Income for the fiscal year ended September 28, 2013.
It is reasonably possible that a number of uncertain tax positions related to federal and state tax positions may be settled within the next 12 months. Settlement of these matters is not expected to have a material effect on the Company’s consolidated results of operations, financial position and cash flows. The Company is currently under examination by taxing authorities in the U.S. for fiscal years 2008 through 2010. The U.S. examination may be resolved within the next twelve months, but at this time it is not possible to estimate the amount of the effects of any changes to the Company's previously recorded uncertain tax positions. Periodically, the Company's foreign operations are notified by local taxing authorities of an examination of current or prior period tax related filings. The Company is not aware of any material proposed adjustment that has not been reflected in the current financial statements.
The Company files income tax returns, including returns for its subsidiaries, with federal, state, local and foreign taxing jurisdictions. The following tax years remain subject to examination by the respective major tax jurisdictions:
 
Jurisdiction
  
Fiscal Years
China
 
2008-2013
Germany
 
2009-2013
Mexico
 
2006-2013
Romania
 
2009-2013
United Kingdom
 
2007-2013
United States
 
 
  Federal
 
2007-2013
       State
 
2001-2013
 

8.    Earnings Per Share

59

Table of Contents
Plexus Corp.
Notes to Consolidated Financial Statements


The following is a reconciliation of the amounts utilized in the computation of basic and diluted earnings per share for fiscal 2013, 2012 and 2011 (in thousands, except per share amounts):
 
 
2013
 
2012
 
2011
Earnings:
 
 
 
 
 
 
Net income
 
$
82,259

 
$
62,089

 
$
89,256

 
 
 
 
 
 
 
Basic weighted average common shares outstanding
 
34,330

 
34,874

 
38,063

Dilutive effect of share-based awards outstanding
 
562

 
655

 
737

Diluted weighted average shares outstanding
 
34,892

 
35,529

 
38,800

Earnings per share:
 
 
 
 
 
 
Basic
 
$
2.40

 
$
1.78

 
$
2.34

Diluted
 
$
2.36

 
$
1.75

 
$
2.30


In fiscal 2013, 2012 and 2011, stock options and stock-settled stock appreciation rights (‘SARs”) to purchase approximately 1.9 million, 1.4 million and 1.3 million shares, respectively, were outstanding but were not included in the computation of diluted earnings per share because the options’ and SARs’ exercise prices were greater than the average market price of the Company's common shares and, therefore, their effect would be antidilutive.

Outstanding shares have decreased in recent years as a result of the Company's stock repurchase programs. Refer to Note 14, "Shareholders' Equity" for further information on the Company's stock repurchase programs.

9.    Operating Lease Commitments
The Company has a number of operating lease agreements primarily involving manufacturing facilities, manufacturing equipment and computerized design equipment. These leases are non-cancelable and expire on various dates through 2021. Rent expense under all operating leases for fiscal 2013, 2012 and 2011 was approximately $15.7 million, $14.2 million and $12.8 million, respectively. Renewal and purchase options are available on certain of these leases.

60

Table of Contents

Future minimum annual payments on operating leases are as follows (in thousands):
2014
$
12,689

2015
8,554

2016
6,017

2017
3,663

2018
2,942

Thereafter
12,107

 
 
 
$
45,972

 
 

10.    Benefit Plans
401(k) Savings Plan: The Company’s 401(k) Retirement Plan covers all eligible U.S. employees. The Company matches employee contributions up to 4 percent of eligible earnings. The Company’s contributions for fiscal 2013, 2012 and 2011 totaled $6.6 million, $6.9 million and $5.8 million, respectively.
Stock-based Compensation Plans: The Plexus Corp. 2008 Long-Term Incentive Plan (the “2008 Plan”), which was last approved by shareholders in February 2011, is a stock-based incentive plan for officers, key employees and directors; the 2008 Plan includes provisions by which the Company may grant stock-based awards, including stock options, stock-settled stock appreciation rights (“SARs”), restricted stock, restricted stock units (“RSUs”), unrestricted stock awards (“SAs”) and performance stock awards, in addition to cash incentive awards, to directors, executive officers and other officers and key employees. The maximum number of shares of Plexus common stock which may be issued pursuant to the 2008 Plan is 5,500,000 shares; in addition, cash incentive awards of up to $4.0 million may be granted annually. The exercise price of each stock option and SAR granted must not be less than the fair market value on the date of grant. The Compensation and Leadership Development Committee (the “Committee”) of the Board of Directors may establish a term and vesting period for stock options, SARs, RSUs and other awards under the 2008 Plan as well as accelerate the vesting of such awards. Generally, stock options vest in two annual installments and have a term of ten years, SARs vest in two annual installments and have a term of seven years, and RSUs granted to executive officers, other officers and key employees fully vest on the third anniversary of the grant date (assuming continued employment), which is also the date as of which the underlying shares will be issued. In fiscal 2013, the Committee began granting RSUs to non-employee directors; these RSUs generally fully vest on the first anniversary of the grant date, which is also the date as of which the underlying shares will be issued (unless further deferred).
The 2008 Plan replaced the shareholder-approved 2005 Equity Incentive Plan (the “2005 Plan”). The 2005 Plan terminated upon the approval of the 2008 Plan, except that outstanding awards continue until exercise, expiration or forfeiture.
Individual stock option and SARs grants are determined annually, but granted on a quarterly basis. However, grants of RSUs are generally made only on an annual basis.
Options issued to the members of the Board of Directors in fiscal 2013, 2012 and 2011 vested immediately on the date of grant. SAs issued to members of the Board in fiscal 2012 and 2011 also vested immediately on the date of grant.
In fiscal 2013, under the 2008 Plan, the Company granted options to purchase 0.4 million shares of the Company’s common stock and 0.1 million stock-settled SARs. Additionally, the Committee made awards of RSUs for 0.3 million shares of common stock, and the Committee did not grant SAs for shares of common stock.
In fiscal 2012, under the 2008 Plan, the Company granted options to purchase 0.3 million shares of the Company’s common stock and 0.2 million stock-settled SARs. Additionally, the Committee made awards of RSUs for 0.3 million shares of common stock, and the Committee granted SAs for 6.0 thousand shares of common stock.
In fiscal 2011, under the 2008 Plan, the Company granted options to purchase 0.3 million shares of the Company’s common stock and 0.3 million stock-settled SARs. Additionally, the Committee made awards of RSUs for 0.1 million shares of common stock, and the Committee granted SAs for 10.0 thousand shares of common stock.
The Company recognized $11.8 million, $12.5 million and $11.0 million of compensation expense associated with stock options, SARs, RSUs and SAs for fiscal 2013, 2012 and 2011, respectively. No deferred tax benefits related to equity awards were recognized in fiscal 2013 or 2012. A related deferred tax benefit of $3.7 million was recognized for fiscal 2011.

61

Table of Contents
Plexus Corp.
Notes to Consolidated Financial Statements


A summary of the Company’s stock option and SAR activity follows:
 
 
Number of
Options/SARs
(in thousands)
 
Weighted
Average Exercise
Price
 
Aggregate
Intrinsic Value
(in thousands)
Outstanding as of October 2, 2010
 
3,189

 
$
26.18

 
 
 
 
 
 
 
 
 
Granted
 
641

 
31.01

 
 
Cancelled
 
(110
)
 
34.87

 
 
Exercised
 
(501
)
 
20.78

 
 
Outstanding as of October 1, 2011
 
3,219

 
$
27.69

 
 
 
 
 
 
 
 
 
Granted
 
518

 
30.24

 
 
Cancelled
 
(105
)
 
34.44

 
 
Exercised
 
(561
)
 
22.36

 
 
Outstanding as of September 29, 2012
 
3,071

 
$
28.86

 
 
 
 
 
 
 
 
 
Granted
 
515

 
27.66

 
 
Cancelled
 
(141
)
 
25.48

 
 
Exercised
 
(380
)
 
22.00

 
 
Outstanding as of September 28, 2013
 
3,065

 
$
29.27

 
$
25,547

 
 
 
Number of
Options/SARs
(in thousands)
 
Weighted Average Exercise Price
 
Aggregate
Intrinsic Value(in thousands)    
Exercisable as of:
 
 
 
 
 
 
October 1, 2011
 
2,383

 
$
26.38

 
 
September 29, 2012
 
2,327

 
$
28.32

 
 
September 28, 2013
 
2,375

 
$
29.49

 
$
19,763

Included in the stock option and SAR activity table above are 0.1 million, 0.2 million and 0.3 million SARs, which were granted in fiscal 2013, 2012 and 2011, respectively.
The following table summarizes outstanding stock option and SAR information as of September 28, 2013 (Options/SARs in thousands):
Range of
    Exercise Prices    
 
Number of
 Options/SARs 
Outstanding
 
Weighted
Average
    Exercise Price    
 
Weighted
Average
  Remaining Life  
 
Number of
 Options/SARs 
Exercisable
 
Weighted
Average
  Exercise Price  
$12.94 - $19.41
 
278

 
$
14.75

 
3.0
 
278

 
$
14.75

$19.42 - $29.12
 
1,269

 
$
25.02

 
6.2
 
804

 
$
24.43

$29.13 - $42.52
 
1,518

 
$
35.48

 
5.3
 
1,293

 
$
35.81

$12.94 - $42.52
 
3,065

 
$
29.27

 
5.5
 
2,375

 
$
29.49

The Company continues to use the Black-Scholes valuation model to value options and SARs. The Company used its historical stock prices as the basis for its volatility assumptions. The assumed risk-free rates were based on U.S. Treasury rates in effect at the time of grant with a term consistent with the expected option and SAR lives. The expected option and SARs lives represent the period of time that the options and SARs granted are expected to be outstanding and were based on historical experience.
The weighted average fair value per share of options and SARs granted for fiscal 2013, 2012 and 2011 were $11.88, $13.13 and $13.40, respectively. The fair value of each option and SAR grant was estimated at the date of grant using the Black-Scholes option-pricing model based on the assumption ranges below:

62

Table of Contents
Plexus Corp.
Notes to Consolidated Financial Statements


 
 
2013
 
2012
 
2011
Expected life (years)
 
4.40 - 5.00
 
4.40 - 5.00
 
4.40 - 5.00
Risk-free interest rate
 
0.57 - 2.71%
 
0.57 - 1.09%
 
1.03 - 2.17%
Expected volatility
 
45 - 51%
 
50 - 51%
 
49 - 50%
Dividend yield
 
 
 
The fair value of options and SARs vested for fiscal 2013, 2012 and 2011 were $3.3 million, $4.3 million and $3.6 million, respectively.
For fiscal 2013, 2012 and 2011, the total intrinsic value of options and SARs exercised was $4.3 million, $7.6 million and $6.5 million, respectively.
As of September 28, 2013, there was $5.8 million of unrecognized compensation cost related to non-vested options and SARs that is expected to be recognized over a weighted average period of 1.31 years.
 
A summary of the Company’s RSUs and SAs activity follows:
 
 
Number of
Shares
(in thousands)
 
Weighted
Average Fair
Value at Date of
Grant
 
Aggregate
    Intrinsic Value    
(in thousands)
Units outstanding as of October 2, 2010
 
385

 
$
26.90

 
 
 
 
 
 
 
 
 
Granted
 
155

 
27.14

 
 
Canceled
 
(18
)
 
25.92

 
 
Vested
 
(98
)
 
31.27

 
 
Units outstanding as of October 1, 2011
 
424

 
$
26.02

 
 
 
 
 
 
 
 
 
Granted
 
268

 
36.68

 
 
Canceled
 
(26
)
 
33.12

 
 
Vested
 
(200
)
 
25.98

 
 
Units outstanding as of September 29, 2012
 
466

 
$
31.78

 
 
 
 
 
 
 
 
 
Granted
 
329

 
26.16

 
 
Canceled
 
(47
)
 
31.26

 
 
Vested
 
(94
)
 
26.59

 
 
Units outstanding as of September 28, 2013
 
654

 
$
29.73

 
$
24,140

The Company uses the fair value at the date of grant to value RSUs and SAs. The fair values of RSUs and SAs that vested for fiscal 2013, 2012 and 2011 were $0.5 million, $1.4 million and $0.6 million, respectively. There were 93,831 RSUs and no SAs that vested during the fiscal year ended September 28, 2013. There were 193,684 RSUs and 6,000 SAs that vested during the fiscal year ended September 29, 2012. There were 88,112 RSUs and 10,000 SAs that vested during the fiscal year ended October 1, 2011.
As of September 28, 2013, there was $10.7 million of unrecognized compensation cost related to RSUs that is expected to be recognized over a weighted average period of 1.82 years.
Deferred Compensation Arrangements: The Company has agreements with certain of its former executive officers to provide nonqualified deferred compensation. Under those agreements, the Company agreed to pay these former executives, or their designated beneficiaries upon such executives’ deaths, certain amounts annually for the first 15 years subsequent to their retirements.
The Company has a supplemental executive retirement plan (the “SERP”) as an additional deferred compensation plan for executive officers and other key employees. Under the SERP, a covered executive may elect to defer some or all of the participant’s compensation into the plan, and the Company may credit the participant’s account with a discretionary employer

63

Table of Contents
Plexus Corp.
Notes to Consolidated Financial Statements


contribution. Participants are entitled to payment of deferred amounts and any related earnings upon termination or retirement from Plexus.
The SERP operates under a rabbi trust arrangement (the “Trust”). The Trust allows investment of deferred compensation held on behalf of the participants into individual accounts and, within these accounts, into one or more designated investments. Investment choices do not include Plexus stock. In fiscal 2013, 2012 and 2011, the Company made contributions to the participants’ SERP accounts in the amount of $0.4 million, $0.4 million and $0.3 million, respectively.
As of September 28, 2013 and September 29, 2012, the SERP assets held in the Trust totaled $9.1 million and $7.7 million, respectively, and the related liability to the participants totaled approximately $5.6 million and $4.8 million as of September 28, 2013 and September 29, 2012, respectively. The Trust assets are subject to the claims of the Company’s creditors. The Trust assets and the related liabilities to the participants are included in non-current “Other assets” and non-current “Other liabilities”, respectively, in the accompanying Consolidated Balance Sheets.
Other: The Company currently does not and is not obligated to provide any postretirement medical or life insurance benefits to employees.
 
11.    Litigation
The Company is party to lawsuits in the ordinary course of business. Management does not believe that these proceedings, individually or in the aggregate, will have a material positive or adverse effect on the Company’s consolidated financial position, results of operations or cash flows.
 

12.    Reportable Segments, Geographic Information and Major Customers
Reportable segments are defined as components of an enterprise about which separate financial information is available that is evaluated regularly by the chief operating decision maker, or group, in assessing performance and allocating resources.
The Company uses an internal management reporting system, which provides important financial data to evaluate performance and allocate the Company’s resources on a regional basis. Net sales for segments are attributed to the region in which the product is manufactured or service is performed. The services provided, manufacturing processes used, class of customers serviced and order fulfillment processes used are similar and generally interchangeable across the segments. A segment’s performance is evaluated based upon its operating income (loss). A segment’s operating income (loss) includes its net sales less cost of sales and selling and administrative expenses, but excludes corporate and other costs, interest expense, interest income, other miscellaneous income (expense), and income taxes. Corporate and other costs primarily represent corporate selling and administrative expenses, and restructuring and impairment costs, if any. These costs are not allocated to the segments, as management excludes such costs when assessing the performance of the segments. Inter-segment transactions are generally recorded at amounts that approximate arm’s length transactions. The accounting policies for the regions are the same as for the Company taken as a whole.

Information about the Company’s three reportable segments for fiscal 2013, 2012 and 2011 were as follows (in thousands):

64

Table of Contents
Plexus Corp.
Notes to Consolidated Financial Statements


 
 
 
2013
 
2012
 
2011
Net sales:
 
 
 
 
 
 
AMER
 
$
1,062,758

 
$
1,255,851

 
$
1,304,885

APAC
 
1,146,299

 
1,110,365

 
1,063,079

EMEA
 
122,566

 
95,360

 
92,269

Elimination of inter-segment sales
 
(103,592
)
 
(154,844
)
 
(229,001
)
 
 
$
2,228,031

 
$
2,306,732

 
$
2,231,232

 
 
 
 
 
 
 
Depreciation:
 
 
 
 
 
 
AMER
 
$
13,474

 
$
14,486

 
$
15,045

APAC
 
23,560

 
23,428

 
20,723

EMEA
 
4,644

 
3,438

 
2,947

Corporate
 
5,732

 
6,566

 
7,919

 
 
$
47,410

 
$
47,918

 
$
46,634

 
 
 
 
 
 
 
Operating income (loss):
 
 
 
 
 
 
AMER
 
$
70,863

 
$
91,087

 
$
68,725

APAC
 
116,350

 
101,903

 
118,063

EMEA
 
(3,096
)
 
(2,325
)
 
(2,955
)
Corporate and other costs
 
(87,494
)
 
(86,506
)
 
(82,654
)
 
 
$
96,623

 
$
104,159

 
$
101,179

Capital expenditures:
 
 
 
 
 
 
   AMER
 
$
60,507

 
$
11,532

 
$
12,578

   APAC
 
12,345

 
39,321

 
44,890

EMEA
 
30,836

 
9,863

 
10,233

Corporate
 
4,434

 
2,981

 
3,118

 
 
$
108,122

 
$
63,697

 
$
70,819

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
September 28,
2013
 
September 29,
2012
 
 
Total assets:
 
 
 
 
 
 
AMER
 
$
423,048

 
$
403,911

 
 
APAC
 
828,672

 
771,781

 
 
EMEA
 
111,977

 
88,420

 
 
Corporate
 
83,987

 
147,355

 
 
 
 
$
1,447,684

 
$
1,411,467

 
 
 
 
 
 
 
 
 

65

Table of Contents
Plexus Corp.
Notes to Consolidated Financial Statements


The following enterprise-wide information is provided in accordance with the required segment disclosures for fiscal 2013, 2012 and 2011. Net sales to unaffiliated customers were based on the Company’s location providing product or services (in thousands):
 
 
2013
 
2012
 
2011
 
 
 
 
 
 
 
Net sales:
 
 
 
 
 
 
United States
 
$
1,004,153

 
$
1,156,347

 
$
1,192,389

Malaysia
 
877,748

 
872,733

 
836,808

China
 
268,551

 
237,632

 
226,271

United Kingdom
 
81,657

 
60,313

 
75,771

Mexico
 
58,605

 
99,504

 
112,496

Romania
 
38,117

 
33,835

 
16,498

Germany
 
2,792

 
1,212

 

Elimination of inter-segment sales
 
(103,592
)
 
(154,844
)
 
(229,001
)
 
 
 
 
 
 
 
 
 
$
2,228,031

 
$
2,306,732

 
$
2,231,232

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
September 28,
2013
 
September 29,
2012
 
 
Long-lived assets:
 
 
 
 
 
United States
 
$
110,548

 
$
61,269

 
Malaysia
 
83,732

 
95,907

 
China
 
35,230

 
36,737

 
United Kingdom
 
14,645

 
9,256

 
Mexico
 
5,610

 
7,368

 
Romania
 
37,188

 
13,586

 
Germany
 
616

 
623

 
Other Foreign
 
5,463

 
5,540

 
Corporate
 
32,029

 
34,905

 
 
 
 
 
 
 
 
 
$
325,061

 
$
265,191

 
Due to the Company being a contract manufacturer that produces unique products and services related to each contract, it is impracticable to provide revenue by product/service information.
Long-lived assets as of September 28, 2013 and September 29, 2012 exclude other long-term assets and deferred income tax assets which totaled $43.6 million and $46.5 million, respectively.

The percentages of net sales to customers representing 10 percent or more of total net sales for fiscal 2013, 2012 and 2011 were as follows:
 
 
2013
 
2012
 
2011
Juniper Networks, Inc. (“Juniper”)
 
13%
 
16%
 
17%
For our significant customers, we generally manufacture products in more than one location. For example, net sales to Juniper, our largest customer in all periods presented, occurred in the AMER and APAC reportable segments. Production for Juniper concluded at the end of our third fiscal quarter of 2013. However, sales of certain inventory continued into our fourth fiscal quarter of 2013. We do not expect to incur any material adjustments related to this inventory. We expect no further shipments to Juniper in fiscal 2014.

66

Table of Contents
Plexus Corp.
Notes to Consolidated Financial Statements


No customer represented 10 percent or more of total accounts receivable as of September 28, 2013 or September 29, 2012.

13.    Guarantees
The Company offers certain indemnifications under its customer manufacturing agreements. In the normal course of business, the Company may from time to time be obligated to indemnify its customers or its customers’ customers against damages or liabilities arising out of the Company’s negligence, misconduct, breach of contract, or infringement of third party intellectual property rights. Certain agreements have extended broader indemnification, and while most agreements have contractual limits, some do not. However, the Company generally does not provide for such indemnities and seeks indemnification from its customers for damages or liabilities arising out of the Company’s adherence to customers’ specifications or designs or use of materials furnished, or directed to be used, by its customers. The Company does not believe its obligations under such indemnities are material.
In the normal course of business, the Company also provides its customers a limited warranty covering workmanship, and in some cases materials, on products manufactured by the Company. Such warranty generally provides that products will be free from defects in the Company’s workmanship and meet mutually agreed-upon specifications for periods generally ranging from 12 months to 24 months. If a product fails to comply with the Company’s limited warranty, the Company’s obligation is generally limited to correcting, at its expense, any defect by repairing or replacing such defective product. The Company’s warranty generally excludes defects resulting from faulty customer-supplied components, design defects or damage caused by any party or cause other than the Company.
The Company provides for an estimate of costs that may be incurred under its limited warranty at the time product revenue is recognized and establishes additional reserves for specifically identified product issues. These costs primarily include labor and materials, as necessary, associated with repair or replacement and are included in the Company's accompanying Consolidated Balance Sheets in other current accrued liabilities. The primary factors that affect the Company’s warranty liability include the value and the number of shipped units and historical and anticipated rates of warranty claims. As these factors are impacted by actual experience and future expectations, the Company assesses the adequacy of its recorded warranty liabilities and adjusts the amounts as necessary.
 
Below is a table summarizing the activity related to the Company’s limited warranty liability for the fiscal years 2013 and 2012 (in thousands):
 Limited warranty liability, as of October 1, 2011
$
5,453

Accruals for warranties issued during the period
649

Settlements (in cash or in kind) during the period
(957
)
 
Limited warranty liability, as of September 29, 2012
5,145

Accruals for warranties issued during the period
1,168

Settlements (in cash or in kind) during the period
(371
)
 
Limited warranty liability, as of September 28, 2013
$
5,942



14.    Shareholders' Equity

On February 16, 2011 the Company’s Board of Directors approved a share repurchase program that authorized the Company to repurchase up to $200 million of common stock. On August 15, 2011, the Company completed its share repurchase program with a total of 6.3 million shares purchased for approximately $200.0 million, at an average price of $31.69 per share. These shares were recorded as treasury stock.

On October 23, 2012, the Board of Directors approved a stock repurchase program under which the Company was authorized to repurchase up to $50 million of its common stock. This program was completed in the fourth quarter of fiscal 2013. During fiscal 2013, the Company repurchased 1,821,698 shares under this program for approximately $49.9 million, at an average price of $27.37 per share. These shares were recorded as treasury stock.

On August 19, 2013, the Board of Directors approved a stock repurchase program under which the Company is authorized to repurchase up to $30 million of its common stock in fiscal 2014. Accordingly, no shares were purchased under this authorization in fiscal 2013.

67

Table of Contents


Pursuant to the Company’s Rights Agreement, each preferred share purchase right (a “Right”) entitles the registered holder to purchase from the Company one one-hundredth of a share of the Company’s Series B Junior Participating Preferred Stock, $0.01 par value per share (“Preferred Share”), at a price of $125.00 per one one-hundredth of a Preferred Share, subject to adjustment. The Rights are exercisable only if a person or group acquires beneficial ownership of more than 20% of the Company’s outstanding common stock or commences, or announces an intention to make, a tender offer or exchange offer that would result in such person or group acquiring the beneficial ownership of more than 20% of the Company’s common stock. The Rights expire on August 28, 2018, subject to extension.


15.    Quarterly Financial Data (Unaudited)
Summarized quarterly financial data for fiscal 2013 and 2012 consisted of (in thousands, except per share amounts): 
2013
 
First
Quarter
 
Second
Quarter
 
Third
Quarter
 
Fourth
Quarter
 
Total
Net sales
 
$
530,532

 
$
557,824

 
$
571,945

 
$
567,730

 
$
2,228,031

Gross profit
 
51,162

 
52,021

 
55,473

 
54,529

 
213,185

Net income
 
16,616

 
17,975

 
23,204

 
24,464

 
82,259

 
 
 
 
 
 
 
 
 
 
 
Earnings per share (1):
 
 
 
 
 
 
 
 
 
 
Basic
 
$
0.48

 
$
0.52

 
$
0.69

 
$
0.73

 
$
2.40

Diluted
 
$
0.47

 
$
0.52

 
$
0.68

 
$
0.71

(2)
$
2.36

 
 
 
 
 
 
 
 
 
 
 
2012
 
First
Quarter
 
Second
Quarter
 
Third
Quarter
 
Fourth
Quarter
 
Total
Net sales
 
$
529,654

 
$
573,470

 
$
608,819

 
$
594,789

 
$
2,306,732

Gross profit
 
51,652

 
54,624

 
57,393

 
56,244

 
219,913

Net income
 
17,870

 
19,958

 
23,533

 
728

*
62,089

 
 
 
 
 
 
 
 
 
 
 
Earnings per share (1):
 
 
 
 
 
 
 
 
 
 
Basic
 
$
0.52

 
$
0.57

 
$
0.67

 
$
0.02

 
$
1.78

Diluted
 
$
0.51

 
$
0.56

 
$
0.66

 
$
0.02

 
$
1.75

(1) The annual total amounts may not equal the sum of the quarterly amounts due to rounding. Earnings per share is computed independently for each quarter.
(2) Adjusting for fourth quarter discrete tax items, as discussed in Note 7, "Income Taxes," diluted earnings per share for the fourth quarter of 2013 was $0.67.
*See Note 7 in Notes to Consolidated Financial Statements for discussion regarding the fiscal 2012 valuation allowance recorded for deferred tax assets.
Plexus Corp. and Subsidiaries
Schedule II – Valuation and Qualifying Accounts
For the fiscal years ended September 28, 2013September 29, 2012 and October 1, 2011 (in thousands):

68

Table of Contents

Descriptions
 
Balance at
beginning of
period
 
Additions
charged to
costs and
expenses
 
Additions
charged to
other accounts
 
Deductions
 
Balance at end
of period
Fiscal Year 2013:
 
 
 
 
 
 
 
 
 
 
Allowance for losses on accounts receivable (deducted from the asset to which it relates)
 
$
1,011

 
$
1,036

 
$

 
$
1,039

*
$
1,008

Valuation allowance on deferred income tax assets (deducted from the asset to which it relates)
 
$
27,087

 
$
6,988

 
$

 
$

 
$
34,075

 
 
 
 
 
 
 
 
 
 
 
Fiscal Year 2012:
 
 
 
 
 
 
 
 
 
 
Allowance for losses on accounts receivable (deducted from the asset to which it relates)
 
$
3,256

 
$
259

 
$

 
$
2,504

*
$
1,011

Valuation allowance on deferred income tax assets (deducted from the asset to which it relates)
 
$
5,116

 
$
21,971

 
$

 
$

 
$
27,087

 
 
 
 
 
 
 
 
 
 
 
Fiscal Year 2011:
 
 
 
 
 
 
 
 
 
 
Allowance for losses on accounts receivable (deducted from the asset to which it relates)
 
$
1,400

 
$
1,863

 
$

 
$
7

 
$
3,256

Valuation allowance on deferred income tax assets (deducted from the asset to which it relates)
 
$
2,548

 
$
1,238

 
$
1,330

 
$

 
$
5,116

* Amount represents favorable resolution of amounts previously reserved for at the end of the prior year and amounts written off.

69

Table of Contents
Plexus Corp.
Notes to Consolidated Financial Statements


SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
 
 
 
 
 
 
 
 
PLEXUS CORP. (Registrant)
 
 
 
 
 
By:
 
/s/ Dean A. Foate
 
 
 
 
Dean A. Foate, Chairman, President and Chief Executive Officer
 
 
November 22, 2013
POWER OF ATTORNEY
KNOW ALL MEN BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints Dean A. Foate, Ginger M. Jones and Angelo M. Ninivaggi, and each of them, his or her true and lawful attorneys-in-fact and agents, with full power of substitution and resubstitution, for him or her and in his or her name, place and stead, in any and all capacities, to sign any and all amendments to this report, and to file the same with all exhibits thereto, and other documents in connection therewith, with the Securities and Exchange Commission, and any other regulatory authority, granting unto said attorneys-in-fact and agents, and each of them, full power and authority to do and perform each and every act and thing requisite and necessary to be done in and about the premises, as fully to all intents and purposes as he or she might or could do in person, hereby ratifying and confirming all that said attorneys-in-fact and agents or any of them, or their substitutes, may lawfully do or cause to be done by virtue hereof.
Pursuant to the requirement of the Securities Exchange Act of 1934, this report has been signed by the following persons on behalf of the registrant and in the capacities and on the date indicated.*
SIGNATURE AND TITLE
 
 
 
 
 
 
/s/ Dean A. Foate
 
 
 
/s/ Rainer Jueckstock
Dean A. Foate, Chairman, President and Chief Executive Officer (Principal Executive Officer)
 
 
 
Rainer Jueckstock, Director
 
 
 
/s/ Ginger M. Jones
 
 
 
/s/ Peter Kelly
Ginger M. Jones, Senior Vice President and Chief
Financial Officer (Principal Financial Officer and
Principal Accounting Officer)
 
 
 
Peter Kelly, Director
 
 
 
/s/ Ralf R. Böer
 
 
 
/s/ Philip R. Martens
Ralf R. Böer, Director
 
 
 
Philip R. Martens, Director
 
 
 
/s/ Stephen P. Cortinovis
 
 
 
/s/ Michael V. Schrock
Stephen P. Cortinovis, Director
 
 
 
Michael V. Schrock, Director
 
 
 
/s/ David J. Drury
 
 
 
/s/ Mary A. Winston
David J. Drury, Director
 
 
 
Mary A. Winston, Director

*Each of the above signatures is affixed as of November 22, 2013.

70

Table of Contents

EXHIBIT INDEX
PLEXUS CORP.
Form 10-K for Fiscal Year Ended September 28, 2013
 
 
 
 
 
 
Exhibit No.
  
Exhibit
Incorporated By
Reference To
  
Filed
Herewith
 
 
 
 
3(i)
  
(a) Restated Articles of Incorporation of Plexus Corp., as amended through August 28, 2008
Exhibit 3(i) to Plexus’ Report on Form 10-Q for the quarter ended March 31, 2004
  
 
 
 
 
 
 
  
(b) Articles of Amendment, dated August 28, 2008, to the Restated Articles of Incorporation
Exhibit 3.1 to Plexus’ Report on Form 8-K dated August 28, 2008
  
 
 
 
 
 
3(ii)
  
Bylaws of Plexus Corp., adopted February 13, 2008, amended as of September 23, 2010
Exhibit 3.1 to Plexus’ Report on Form 8-K dated September 23, 2010
  
 
 
 
 
 
4.1
  
Restated Articles of Incorporation of Plexus Corp., as amended through August 28, 2008
Exhibit 3(i) above
  
 
 
 
 
 
4.2
  
Bylaws of Plexus Corp., adopted February 13, 2008, amended as of September 23, 2010
Exhibit 3(ii) above
  
 
 
 
 
 
4.3
  
Rights Agreement, dated as of August 28, 2008, between Plexus Corp. and American Stock Transfer & Trust Company, LLC
Exhibit 4.1 to Plexus’ Report on Form 8-A dated August 28, 2008
  
 
 
 
 
 
10.1
  
Credit Agreement, dated as of May 15, 2012, among Plexus Corp. and the banks, financial institutions and other institutional lenders listed on the signature pages thereof, U.S. Bank National Association, as administrative agent, PNC Bank, National Association, as syndication agent, The Bank of Tokyo-Mitsubishi UFJ, Ltd., HSBC Bank USA, National Association, RBS Citizens, N.A. and Wells Fargo Bank, N.A., as co-documentation agents, and U.S. Bank National Association and PNC Capital Markets LLC, as joint lead arrangers and joint bookrunners (including the related subsidiary guaranty).

Exhibit 10.1 to Plexus’ Report on Form 8-K dated May 15, 2012
  
 

71

Table of Contents

10.2
  
Note Purchase Agreement, dated as of April 21, 2011, between Plexus Corp. and the Purchasers named therein relating to $175,000,000 5.20% Senior Notes, due June 15, 2018

Exhibit 10.1 to Plexus’ Report on Form 8-K dated April 21, 2011
 
 
 
 
 
 
 
10.3
 
Employment Agreement, dated May 15, 2008, by and between Plexus Corp. and Dean A. Foate*
Exhibit 10.1 to Plexus' Report on Form 8-K dated May 15, 2008
 
 
 
 
 
 
 
 
10.4
  
Form of Change of Control Agreement with each of the executive officers (other than Dean A. Foate)*
Exhibit 10.2 to Plexus’ Report on Form 8-K dated May 15, 2008
  
 
 
 
 
 
10.5
  
Amended and Restated Plexus Corp. 1998 Option Plan* [superseded]
Exhibit 10.1 to Plexus’ Report on Form 10-Q for the quarter ended January 3, 2009
  
 
 
 
 
 
10.6
  
(a) Summary of Directors’ Compensation
(11/12)*
Exhibit 10.8(a) to Plexus' Report on Form 10-K for the year ended September 29, 2012
  
 
 
 
 
 
 
 
(b) Summary of Directors’ Compensation
(11/11)*[superseded]
Exhibit 10.7(a) to Plexus' Report on Form 10-K for the year ended October 1, 2011
 
 
 
 
 
 
 
 
 
  
(c) Plexus Corp. 1995 Directors’ Stock Option Plan*[superseded]
Exhibit 10.10 to Plexus’ Report on Form 10-K for the year ended September 30, 1994
  
 
 
 
 
 
10.7
  
(a) Plexus Corp. Executive Deferred Compensation Plan*
Exhibit 10.17 to Plexus’ Report on Form 10-K for the fiscal year ended September 30, 2000
  
 
 
 
 
 
 
  
(b) Plexus Corp Executive Deferred Compensation Plan Trust dated April 1, 2003 between Plexus Corp. and Bankers Trust Company*
Exhibit 10.14 to Plexus’ Report on Form 10-K for the fiscal year ended September 30, 2003
  
 
 
 
 
 
10.8
  
Plexus Corp. Non-employee Directors Deferred Compensation Plan* 
Exhibit 10.10 to Plexus' Report on Form 10-K for the fiscal year ended September 29, 2012
  
 
 
 
 
 
10.9 (a)
  
Amended and Restated Plexus Corp. 2008 Long-Term Incentive Plan*
Exhibit 10.11(a) to Plexus' Report on Form 10-K for the fiscal year ended September 29, 2012
  
 
 
 
 
 
10.9(b)
  
Forms of award agreements thereunder*
 
  
 
 
 
 
 
 
  
(i) Form of Stock Option Agreement
Exhibit 10.2 to Plexus’ Report on Form 10-Q for the quarter ended January 2, 2010
  
 

72

Table of Contents

 
  
(ii) Form of Restricted Stock Unit Award
Exhibit 10.5(b) to Plexus’ Report on Form 10-Q for the quarter ended March 29, 2008
 
 
 
 
 
 
 
 
  
(iii) Form of Stock Appreciation Rights Agreement
Exhibit 10.5(c) to Plexus’ Report on Form 10-Q for the quarter ended March 29, 2008
 
 
 
 
 
 
 
 
  
(iv) Form of Unrestricted Stock Award
Exhibit 10.3 to Plexus’ Report on Form 10-Q for the quarter ended January 2, 2010
 
 
 
 
 
 
 
 
 
  
(v) Form of Plexus Corp. Variable Incentive Compensation Plan — Plexus Leadership Team
Exhibit 10.1 to Plexus’ Report on Form 10-Q for the quarter ended April 2, 2011
  
 
 
 
 
 
 
  
(vi) Form of Restricted Stock Unit Award Agreement for Directors (Form of award agreement consistent with the terms of the 2008 Long-Term Incentive Plan.)
 
  
X
 
 
 
 
 
 
 
 
(vii) Form of Performance Stock Unit Agreement (Form of award agreement consistent with the terms of the 2008 Long-Term Incentive Plan.)
 
 
X
 
 
 
 
 
 
10.10
  
Form of Plexus Corp. Long-Term Cash Agreement*
Exhibit 10.1 to Plexus’ Report on Form 10-Q for the quarter ended December 29, 2007
  
 
 
 
 
 
10.11(a)
  
Amended and Restated Plexus Corp. 2005 Equity Incentive Plan* [superseded]
Exhibit 10.2 to Plexus’ Report on Form 10-Q for the quarter ended January 3, 2009
  
 
 
 
 
 
10.11(b)
  
Forms of award agreements thereunder*
[superseded]
 
  
 
 
 
 
 
 
  
(i) Form of Option Grant (Officer or Employee)
Exhibit 10.1 to Plexus’ Report on Form 8-K dated April 1, 2005
  
 
 
 
 
 
 
  
(ii) Form of Option Grant (Director)
Exhibit 10.2 to Plexus’ Report on Form 8-K dated November 17, 2005
  
 
 
 
 
 
 
  
(iii) Form of Restricted Stock Unit Award with Time Vesting
Exhibit 10.4 to Plexus’ Report on Form 8-K dated April 1, 2005
  
 
 
 
 
 
 
  
(iv) Form of Stock Appreciation Right Award
Exhibit 10.1 to Plexus’ Report on Form 8-K dated August 29, 2007
  
 
 
 
 
 
10.12
 
Amendment No. 1 to Standard Design-Build Agreement between Plexus Corp. and Miron Construction Co., Inc., dated July 3, 2012 (together with the underlying agreement).
Exhibit 10.1 to Plexus' Report on Form 8-K dated July 3, 2012
 
 
 
 
 
 
 
 
21
  
List of Subsidiaries
 
  
X
 
 
 
 

73

Table of Contents

23
  
Consent of PricewaterhouseCoopers LLP
 
  
X
 
 
 
 
24
  
Powers of Attorney
(Signature Page Hereto)
  
 
 
 
 
 
31.1
  
Certification of Chief Executive Officer pursuant to Section 302(a) of the Sarbanes-Oxley Act of 2002.
 
  
X

74

Table of Contents

 
 
 
 
31.2
  
Certification of Chief Financial Officer pursuant to Section 302(a) of the Sarbanes-Oxley Act of 2002.
 
  
X
 
 
 
 
32.1
  
Certification of the CEO pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
 
  
X
 
 
 
 
32.2
  
Certification of the CFO pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
 
  
X
 
 
 
 
99.1
  
Reconciliation of ROIC to GAAP Financial Statements
 
  
X
 
 
 
 
101
  
The following materials from Plexus Corp.’s Annual Report on Form 10-K for the fiscal year ended September 28, 2013, formatted in XBRL (Extensible Business Reporting Language): (i) the Consolidated Statements of Comprehensive Income, (ii) the Consolidated Balance Sheets, (iii) the Consolidated Statements of Shareholders’ Equity, (iv) the Consolidated Statements of Cash Flows, and (v) Notes to Consolidated Financial Statements.
 
  
X
 
 
 
 
101.INS
  
XBRL Instance Document
 
  
X
 
 
 
 
101.SCH
  
XBRL Taxonomy Extension Schema Document
 
  
X
 
 
 
 
101.CAL
  
XBRL Taxonomy Extension Calculation Linkbase Document
 
  
X
 
 
 
 
101.LAB
  
XBRL Taxonomy Extension Label Linkbase Document
 
  
X
 
 
 
 
101.PRE
  
XBRL Taxonomy Extension Presentation Linkbase Document
 
  
X
 
 
 
 
101.DEF
  
XBRL Taxonomy Extension Definition Linkbase Document
 
  
X
 
 
*
  
Designates management compensatory plans or agreements.

75