UNITED STATES
SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended March 31, 2009

Commission file number 0-52491

MIMEDX GROUP, INC.

(Exact name of registrant as specified in its charter)

Florida		26-2792552
(State or other jurisdiction of incorporation)		(I.R.S. Employer Identification Number)
1234 Airport Road, Suite 105
Destin, Florida		32541
(Address of principal executive offices)		(Zip Code)

(850) 269-0000

Registrant’s telephone number, including area code

Securities registered pursuant to Section 12(b) of the Act: None

Securities registered pursuant to Section 12(g) of the Act:

Common Stock, par value $0.001 per share
(Title of class)

Indicate by check mark whether the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes o No þ

Indicate by check mark whether the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes o No þ

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes þ No o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§229,405 of this chapter) during the preceeding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes o No o

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of the registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. Yes o No þ

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Large accelerated filer o		Accelerated filer þ		Non-accelerated filer o (Do not check if a smaller reporting company)		Smaller reporting company o

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o No þ

The aggregate market value of Common Stock held by non-affiliates on September 30, 2008, based upon the last sale price of the shares as reported on the OTC Bulletin Board on such date, was approximately $179,000,000.

There were 41,734,628 shares of Common Stock outstanding as of June 10, 2009.

Documents Incorporated by Reference

Portions of the proxy statement relating to the 2009 annual meeting of shareholders, to be filed within 120 days after the end of the fiscal year to which this report relates, are incorporated by reference in Part III of this Report.

 

 

TABLE OF CONTENTS

PART I			2
Item 1. Business			2
Item 1A. Risk Factors			17
Item 1B. Unresolved Staff Comments			29
Item 2. Properties			29
Item 3. Legal Proceedings			29
Item 4. Submissions of Matters to a Vote of Security Holders			29
PART II			30
Item 5. Market for Registrant’s Common Equity, Related Shareholder Matters and Issuer Purchases of Equity Securities			30
Item 6. Selected Financial Data			30
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations			30
Item 7A. Quantitative and Qualitative Disclosures About Market Risk			35
Item 8. Financial Statements and Supplementary Data			35
Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure			59
Item 9A(T). Controls and Procedures			59
Item 9B. Other Information			59
PART III			60
Item 10. Directors, Executive Officers and Corporate Governance			60
Item 11. Executive Compensation			60
Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Shareholder Matters			60
Item 13. Certain Relationships and Related Transactions, and Director Independence			60
Item 14. Principal Accounting Fees and Services			60
PART IV			61
Item 15. Exhibits, Financial Statement Schedules			61
SIGNATURES			64
Exhibit 23.1
Exhibit 31.1
Exhibit 31.2
Exhibit 32.1
Exhibit 32.2

PART I

Item 1. Business

This Form 10-K and certain information incorporated herein by reference contain forward-looking statements and information within the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995, Section 27A of the Securities Act of 1933, and Section 21E of the Securities Exchange Act of 1934. This information includes assumptions made by, and information currently available to management, including statements regarding future economic performance and financial condition, liquidity and capital resources, acceptance of the Company’s products by the market, and management’s plans and objectives. In addition, certain statements included in this and our future filings with the Securities and Exchange Commission (“SEC”), in press releases, and in oral and written statements made by us or with our approval, which are not statements of historical fact, are forward-looking statements. Words such as “may,” “could,” “should,” “would,” “believe,” “expect,” “anticipate,” “estimate,” “intend,” “seeks,” “plan,” “project,” “continue,” “predict,” “will,” “should,” and other words or expressions of similar meaning are intended by us to identify forward-looking statements, although not all forward-looking statements contain these identifying words. These forward-looking statements are found at various places throughout this report and in the documents incorporated herein by reference. These statements are based on our current expectations about future events or results and information that is currently available to us, involve assumptions, risks, and uncertainties, and speak only as of the date on which such statements are made.

Our actual results may differ materially from those expressed or implied in these forward-looking statements. Factors that may cause such a difference, include, but are not limited to those discussed in Part I, Item 1A, “Risk Factors,” below. Except as expressly required by the federal securities laws, we undertake no obligation to update any such factors, or to publicly announce the results of, or changes to any of the forward-looking statements contained herein to reflect future events, developments, changed circumstances, or for any other reason.

Background of MiMedx Group, Inc.

MiMedx Group, Inc. was originally formed as a Utah corporation on July 30, 1985, under the name Leibra, Inc. We later changed domicile, through a merger, to Nevada, and subsequently changed our name to Alynx, Co. We had several additional name changes in connection with various business acquisitions, all of which were discontinued or rescinded. We were an inactive shell corporation for 10 years or more, seeking to acquire an interest in a business with long-term growth potential. On March 6, 2007, Alynx, Co. filed a registration statement with the SEC on Form 10-SB to register its common stock under the Securities Exchange Act of 1934.

In a merger consummated on February 8, 2008, Alynx, Co. acquired MiMedx, Inc., a Florida-based, privately-held, development-stage medical device company (“MiMedx”). MiMedx’s assets included three development units focused on the development of medical devices based on their respective patented and proprietary technologies. MiMedx’s primary development unit was focused on the development of products for the repair of soft tissue, such as tendons, ligaments and cartilage, using a collagen fiber-based platform predicated on certain cross linking technology, which was licensed from Shriners Hospital for Children and University of South Florida Research Foundation in January 2007. The assets of MiMedx also included 100% of the membership interests in SpineMedica, LLC (“SpineMedica”), a development-stage company focused on Orthopedic-Spine biomaterial technologies using a poly-vinyl alcohol (“PVA”) based hydrogel that its predecessor, SpineMedica Corp., licensed from SaluMedica, LLC for applications related to the spine in August 2005, and for applications related to the hand (excluding the wrist) and rotator cuff in August 2007. Additionally, MiMedx’s assets included certain intellectual property related to implants for use in fracture fixation in the upper extremities that had been contributed to, or developed on behalf of, MiMedx pursuant to a consulting agreement it had entered into in September 2007, with Thomas J. Graham, M.D., a leading hand surgeon.

On March 31, 2008, Alynx, Co. merged into MiMedx Group, Inc, a Florida corporation and wholly-owned subsidiary that had been formed for purposes of the merger. MiMedx Group, Inc. was the surviving corporation in the merger. Also on March 31, 2008, MiMedx entered into a license with SaluMedica, LLC, for the PVA-based hydrogel biomaterial for applications as a surgical sheet outside of the spine.

As used herein, the terms “the Company,” “we,” “our” and “us” refer to MiMedx Group, Inc., a Florida corporation (formerly Alynx, Co.), and its consolidated subsidiaries as a combined entity, except where it is clear that the terms mean only MiMedx Group, Inc.

To assist the Company in transitioning from a development stage company to an operating company, effective February 24, 2009, the Company’s Board of Directors appointed Parker H. “Pete” Petit to serve as the Company’s Chairman of the Board, President and Chief Executive Officer. Mr. Petit has 28 years’ experience in the healthcare products and services markets, and a track record of having successfully nurtured several companies from the development stage to industry leadership.

On April 20, 2009, we received clearance from the U.S. Food and Drug Administration (the “FDA”) to market our Paradís Vaso Shield™ device, indicated for use as a cover for vessels following anterior vertebral surgery.

Our Strategy

Our initial business strategy was to identify and acquire innovative new medical products and technologies, focused initially on the musculoskeletal market, as well as novel medical instrumentation and surgical techniques. We have organized an advisory panel of leading physicians to provide insight in our primary fields of interest for new products and technology as well as guidance and advice with ongoing product development programs. Our plan now is to utilize our experienced management team to commercialize these medical technologies by advancing them through the proper regulatory approval processes, developing or arranging for reliable and cost-effective manufacturing, and either selling or licensing the product lines to others or marketing and selling the products ourselves. Under the direction of our new leadership, our focus is on the near-term opportunities for each of our product groups.

Overview

Our business is the business conducted by our three divisions, MiMedx, SpineMedica and Level Orthopedics. We currently operate in one business segment, musculoskeletal products, which will include the design, manufacture and marketing of products for three major market categories: Orthopedic- Sports Medicine, with soft-tissue reconstructive products aimed at repairing tendons and ligaments, Orthopedics-Spine, including products such as our Paradís Vaso Shield™, which is indicated for use as a cover for vessels following anterior vertebral surgery, and Orthopedic-Extremities, with implants for fracture fixation in the upper extremities (hand, wrist, elbow and shoulder).

During our most recently completed fiscal year ended March 31, 2009 the Company made progress resulting in a number of achievements, including:

•

MiMedx finalized the design and concluded initial testing on its first NDGA cross-linked collagen product, the “BioBraid” designed for tendon and ligament augmentation and repair.

•

MiMedx successfully completed the build-out of its manufacturing facility, designed to permit MiMedx to operate in accordance with Good Manufacturing Practices (GMP) guidelines, which is an integral step for seeking FDA clearance and/or approval and CE Mark certification. This facility is now able to continuously spool NDGA cross-linked collagen fibers, which is a significant step toward commercialization of the fibers.

•

SpineMedica completed the development of its “Paradís Vaso Shield™” surgical sheet product, culminating in a submission to the FDA for 510(k) marketing clearance, which we received on April 20, 2009.

MiMedx Products

MiMedx’s core technology combines an innovative means of wet spinning fibers from soluble collagen and a unique cross-linking process that utilizes nordihydroguaiaretic acid (“NDGA”), a naturally occurring plant compound. Initial laboratory and animal testing shows that collagen cross-linked with NDGA produces a very strong, biocompatible, and durable fiber that can be woven or braided into surgical meshes that can be used to treat a number of orthopedic soft-tissue trauma and disease disorders. Furthermore, tests have shown NDGA biocompatibilizes certain materials that may otherwise create a foreign body response. NDGA is a biological compound, and therefore biomaterials cross-linked with NDGA are composed entirely of biological components.

Embodiments and benefits of products that we believe, based on preliminary studies, could be developed using this licensed technology are:

•

Initial tests of fibers cross-linked with NDGA appear to demonstrate they are stronger than existing collagenous tissue, including healthy tendons and ligaments. These fibers form the fundamental unit from which a variety of devices could be configured as follows:

	•		Linear and braided arrays for tendon and ligament repair
	•		Cross-helical arrays forming tubular structures
	•		Woven meshes for general surgical use;

•

NDGA-treated biomaterials have been tested and results preliminarily suggest that the materials are biocompatible and biodegradable;

•

Biocompatibilization (making a material biocompatible that may otherwise not be) of in-dwelling medical devices by coating with NDGA polymerized collagen;

•

NDGA treatment of xenograft (animal in origin) and allograft (human in origin) materials could make them more biocompatible and possibly improve functional lifetime; and

•

NDGA-treated collagen-based biorivets have the potential to be used for bone fracture fixation.

Our core collagen technology is licensed to us and is embodied in two patents. It covers the polymerization chemistry of NDGA as applied to biological materials, bioprostheses, or devices created through its application. It covers chemistries and compounds that have the reactive groups that are responsible for the effectiveness of NDGA, including a variety of organically synthesized NDGA analogs and natural compounds. Multiple medical products could potentially be developed and patented that are all tied to the core patented technology.

We are currently pursuing the manufacture and optimization of braided collagen and we are focused on advancing our products through the regulatory process to receive FDA clearance to introduce our products to the market.

We may license rights to specific aspects of our collagen technology to third parties for use in applications and indications that we choose not to exploit ourselves.

SpineMedica Products

SpineMedica licenses rights to a PVA polymer, which is a water-based biomaterial that can be manufactured with a wide range of mechanical properties, including those that appear to closely mimic the mechanical and physical properties of natural, healthy human tissue. This hydrogel has been used in other orthopedic and general surgery device applications and we believe it has demonstrated biocompatibility and durability inside the human body. In the United States, the FDA has cleared the material for use as a cover for vessels following anterior vertebral surgery as well as for use next to nerves and in the European Union and Canada, (where other licensees have developed products), it has been cleared for use next to nerves and to replace worn-out and lesioned cartilage in the knee.

As mentioned above, on April 20, 2009, SpineMedica received FDA clearance via a 510(k), for our Paradís Vaso Shield™ (the “Vaso Shield”) surgical sheet, which is a vessel guard, made of our hydrogel material, and we are currently pursuing a CE Mark in Europe. The CE marking, also known as “CE Mark,” is a mandatory conformity mark on many products placed on the single market in the European Economic Area (EEA). The CE marking certifies that a product has met European Union (EU) consumer safety, health or environmental requirements. Protection of veins and arteries is a common issue associated with many types of surgeries. Protection of the aorta, vena cava, iliac vessels and other anatomy is particularly important in anterior spine surgery. The Paradis Vaso Shield™ was designed to help physicians protect vessels following anterior vertebral surgery. The FDA cleared the Paradis Vaso Shield™ as a vessel guard or cover for anterior vertebral surgery, however, the safety and effectiveness of this device for reducing the incidence, severity and extent of post-operative adhesion formation has not been established.

We are currently in the process of identifying other uses and indications for the Vaso Shield product line, including, but not limited to other areas of the spine as well as healthcare categories outside the spine, such as general surgery, obstetrics, and gynecology, maxilla-facial, plastic and cosmetic applications, and others.

There are several other potential applications for the PVA-based hydrogel that we may choose to exploit in the future, but those applications appear to have longer pathways to commercialization.

Level Orthopedics Products

Level Orthopedics, a division of MiMedx owns a number of pending patents that were obtained through a partnership with Thomas Graham, M.D., a well-recognized hand surgeon and Chairman of Surgery at the National Hand Center, Union Memorial Hospital in Baltimore, MD. The focus of Level is the Orthopedic-Extremity category-as directed by scope of our patent applications. The technology encompasses a broad range of unique plates and other devices for fracture fixation of the finger, wrist, arm and elbow, as well as implant designs for joint replacement of the carpometacarpal (CMC or thumb) joint and other extremity-bone and soft tissue repair products.

Market Opportunity

In 2008, the value of the Orthopedic-Biomaterials segment is estimated to be $7.4 billion, representing over 20% of the total Orthopedic Market. It is estimated that this market segment will grow at over 13% per year, which is more than double the rate for the overall Orthopedics Market. The Biomaterials market is expected to grow to a value of $9.4 billion by 2011, mainly due to advancements in the materials science technology, the incidence of trauma and disease associated with the baby-boomer population and resource focus and investment (MedMarket Diligence, Report #M625, “Emerging Trends, Technologies and Opportunities in the Markets for Orthopedic Biomaterials, Worldwide”, 2008).

Orthopedics is one of the largest medical sectors utilizing biomaterials. The development of advanced generation products has prompted many orthopedic companies whose foundations lie in traditional therapies to focus on biomaterials due to physician and patient demand. We believe that new biomaterial products will continue to replace existing products.

The main orthopedic biomaterials markets driving growth are connective and soft tissues, such as tendon and ligament repair (tendons connect muscle to bone and ligaments connect bone to bone), meniscus repair, bone grafts, resorbable technologies, and cartilage repair.

We believe that the number of procedures that might utilize our products is large. The total number of procedures of arthroscopy and soft-tissue repair (including shoulders, hands, knees, ankles, and elbows) in 2003 was estimated at approximately 2.6 million compared to approximately 2.3 million procedures in 2002 according to The Ortho FactBook (2006), published by Knowledge Enterprises, Inc.

Rotator cuff injuries represent a leading cause of shoulder instability and result in approximately 300,000 invasive procedures annually, according to MedTech Insight, an industry marketing research firm.

Also, the NDGA-based biomaterials and related processes under license may prove suitable for use in general surgical procedures for reinforcement of soft tissue where weakness exists or scar tissue formation is not desirable.

Though not yet in development, other possible non-orthopedic products are related to the use of our collagen platform technology as wound care patches indicated for repair of ulcers, second-degree burns and adhesions, as well as general soft-tissue patches and slings, including general surgical reconstruction.

The market revenues for biomaterials in wound care are expected to rise at an accelerated compound annual growth rate of 16.5% from 2006-2013. Combination products (biomaterial dressings that also possess moist dressing, antimicrobials, or alignates) are further driving growth and gaining market share from other advanced wound dressing segments, according to the Frost and Sullivan US Interactive Wound Care Markets Report for 2008.

The market for general soft-tissue patches and slings is not heavily populated because few products have fully satisfied clinical needs and physicians and patients are demanding implants that resorb over time. In 2005, the general soft-tissue repair market for the products listed above was valued at over $600 million in the United States and over $500 million in Europe, with an anticipated growth rate of 14% through 2010, according to a 2006 market research report by Millennium Research Group.

Tendon and Ligament Repair Technologies

Advancements in tendon surgery have focused largely on augmenting the standard of care using synthetic and biomaterials including collagen based devices. Advancements in ligament surgery have focused largely on new methods of graft fixation using interference screws and anchors, which have opened new approaches to repair. We believe there is a new wave of development for ligament and tendon repair, including collagen matrices, allografts and tissue engineered tendons and ligaments that we believe will change how physicians treat these procedures. Therapeutic modalities we continue to focus on are related to the treatment and repair of soft tissues during tendon repair surgery, including reinforcement of the rotator cuff, patellar, Achilles, biceps, quadriceps or other tendons. Following clinical development of the above, we plan to focus on treatments for ligaments and joints, such as medial and lateral collateral ligaments of the knee, elbow and ankle and meniscal repair. Our products could potentially be used in other orthopedic categories as well.

PVA-Based Biomaterials

Our PVA based biomaterial has been used in several medical device applications and is cleared by the FDA for use as a cover for vessels following anterior vertebral surgery (SpineMedica, April 2009) and for use as a nerve cuff (SaluMedica, LLC). We have licensed the right to use Salubria^®, SaluMedica LLC’s formulation, or similar PVA-based biomaterials for certain applications within the body (see “Collaborations and License Agreements”). The material, as Salubria^®, has been sold in Europe for certain applications for over seven years. The PVA-based hydrogel can be processed to have mechanical and physical properties similar to that of human tissue. The biostable hydrogel composition contains water in similar proportions to human tissue, mimicking human tissue’s strength and compliance. For certain applications, the PVA-based hydrogel has been formulated to be wear-resistant and strong. The base organic polymer is known to be biocompatible and hydrophilic. These properties make it a candidate for use as an implant, and may prove suitable for development into medical products addressing various applications. The PVA-based hydrogel and products formed thereof are MRI compatible (allowing for Magnetic Resonance Imaging of a patient with no artifacts or special safety precautions necessary). We have licensed the PVA-based hydrogel for use in the spine, hand (excluding the wrist), rotator cuff and as a surgical sheet.

Spine Anatomy and Disorders

The spine is considered by many orthopedic and neurosurgeons to be the most complex motion segment of the human body. It provides a balance between structural support and flexibility. It consists of 26 separate bones called vertebrae that are connected together by connective tissue to permit a normal range of motion. The spinal cord, the body’s central nerve conduit, is enclosed within the spinal column. Vertebrae are paired into what are called motion segments that move by means of three joints: two facet joints and one spinal disc.

The four major categories of spine disorders are degenerative conditions, deformities, trauma and tumors. The largest market is degenerative conditions of the vertebral discs. These conditions can result in instability, pressure and impingement on the nerve roots as they exit the spinal column, causing often severe and debilitating pain in the back, arms and/or legs.

Current Treatments for Spine Disorders

The current prescribed treatment for spine disorders depends on the severity and duration of the disorder. Initially, physicians typically prescribe non-operative procedures including bed rest, medication, lifestyle modification, exercise, physical therapy, chiropractic care and steroid injections. Non-operative treatment options are often effective; however, other patients require spine surgery. According to Knowledge Enterprises, Inc., the number of spine surgery procedures grew to over 1.2 million per year in 2005 in the United States. The most common spine surgery procedures are: discectomy, the removal of all or part of a damaged disc; laminectomy, the removal of all or part of a lamina, or thin layer of bone, to relieve pinching of the nerve and narrowing of the spinal canal; and fusion, where two or more adjoining vertebrae are fused together to provide stability.

Spine Repair and Vessel Protection

MedTech Insight, LLC’s March 2007 report on “United States Markets for Spinal Motion Preservation Devices,” states that an estimated 50 million people in the United States suffer from back pain. This report also states that in 2004, more than 1 million spine surgeries were performed in the United States—far more than the number of hip and knee replacements combined. Factors driving growth of the spine surgery products market include the growing number of people with degenerative disc disease, which typically is caused by gradual disc damage and often results in disc herniation and chronic, debilitating lower back pain. It is most common among otherwise healthy people in their 30s and 40s and affects approximately half of the United States population age 40 and older.

A disc herniation, or abnormal bulge or rupture, is often caused by degenerative disc disease but may also result from trauma and/or injury. As we age, the disc’s nucleus pulposus, or the center of a spinal disc, loses its water content and the disc begins to degenerate, becoming drier, less flexible, and prone to damage or tears. By the time a person reaches age 80, the nucleus pulposus’ water content decreases to approximately 74%; during the first year of a person’s life, the water content is approximately 90%. The annulus fibrosus, or the outer rim of a spinal disc, also may be damaged by general wear and tear or by injury and can cause bulging and impingement on adjacent nerve roots.

Repair of herniated intervertebral discs or damage as a result of degenerative disc disease commonly involves surgical intervention such as fusion or total disc replacement (TDR). Postsurgical adhesions and fibrosis formation are a common consequence of the normal healing process. The presence of fibrosis may render reoperations or follow- up surgeries risky and have caused nerve root tethering in some patients.

One approach to protecting vessels following anterior vertebral surgery is to provide a barrier between the anterior spine and adjacent vessels. Some studies, not performed by us, have demonstrated that the application of a barrier to protect adjacent vessels may create a dissection plane for future surgeries in that anatomical area.

The safety and effectiveness of SpineMedica’s Vaso Shield device for reducing the incidence, severity and extent of post-operative adhesion formation has not been established.

Another market for which a barrier or plane of dissection-type product is needed is in gynecological uses where the removal and surgical cutting of fibroids and cysts, hysterectomies, and other procedures may lead to post-surgical adhesions. Such adhesions may result in infertility and pelvic pain. Gynecological surgery provides a compelling market because of the high volume of procedures worldwide, and because gynecological infertility surgery is frequently followed up by a laparoscopic second-look procedure at the disease site.

There are many other medical categories for which scar-tissue and fibrosis formation are complicating issues and the Company is researching opportunities for expansion of this product platform.

Market for Level Orthopedic Products

The US Orthopedic-Extremity device market, comprising joint replacement (arthroplasty; as it relates to shoulder, digit, elbow, ankle, and wrist implants and bone cement) and joint fusion (arthrodesis) devices generated $510.1 million in revenue in 2008 (2009 Global Small Joint Implants Market Report; Life Science Intelligence, LLC; Huntington Beach, CA; April, 2009). Sales are expected to grow to $1 billion in 2015. Growth is being driven by the availability of new replacement products, the aging baby-boomer generation and the rising prevalence of diseases such as osteoarthritis. Because arthroplasty and arthrodesis are largely alternative methods for treating the same disorders, technological improvements and patients’ desire to preserve motion and avoid fusion, are expected to drive growth and capture market share in the arthroplasty-related implants market segment away from the arthrodesis segment. From 2006 to 2010, the small joint device market is expected to grow at a compound annual growth rate (CAGR) of 12.9% (U.S. Markets for Small-Joint Devices 2006; Millenium Research Group, July 2006).

Physician Advisory Boards

We have empanelled 35 key physician opinion leaders in relevant fields by asking these physicians to serve on one of our Physician Advisory Boards (“PABs”). Each has entered into a consulting agreement with MiMedx or SpineMedica.

Our PABs include physicians who move medicine forward by scientific endeavor, such as publishing, teaching and developing new solutions to treat injury and diseases. Several members are chairmen of their respective departments at university medical schools, teaching institutions and fellowship programs. Our MiMedx PABs have been assembled consisting of two committees for the initial intended uses: orthopedics sports medicine (the “Sports Committee”) and upper-extremity and plastic surgery indications (the “Hand Committee”).

The Chairman of our MiMedx PAB is James Andrews, M.D., of Birmingham, Alabama, and Gulf Breeze, Florida. Dr. Andrews is one of the best known and most respected sports-medicine physicians in the world. He is the physician for several National Football League and Major League Baseball teams and treats many of the highest-paid professional athletes from numerous teams and from a multitude of sports and is regularly profiled in newspapers and magazines. Dr. Andrews also runs a sought-after fellowship program. Dr. Andrews entered into a three-year consulting agreement with MiMedx on April 10, 2007. Under this agreement, Dr. Andrews receives compensation of $75,000 per year and received a stock option grant for the purchase of up to 100,000 shares of our Common Stock at $1.00 per share, one-third of which vested upon grant and one-third of which will vest on each anniversary date.

The Hand Committee is chaired by Thomas Graham, M.D., Chairman of the National Hand Center located in Baltimore, Maryland. Dr. Graham is the team physician for the Georgetown Hoyas, the Toronto Blue Jays, the Washington Nationals, and the Philadelphia Fliers. The National Hand Center is the largest practice specializing in hand surgery in the United States. Additionally, the Center has been designated by The United States Congress as the National Center for the Treatment of the Hand and Upper Extremity. Dr. Graham entered into a three-year consulting agreement with MiMedx on September 21, 2007, pursuant to which he also transferred certain intellectual property to us. Under his agreement, Dr. Graham receives compensation of $125,000 per year, received a stock option grant to purchase up to 200,000 shares of our Common Stock at an exercise price of $2.40 per share, one-third of which vested upon grant and one-third of which will vest on each anniversary date, and received a right to certain royalty payments. Dr. Graham also received a stock option grant under a previous consulting agreement dated March 8, 2007, for the purchase of up to 50,000 shares of our Common Stock at an exercise price of $1.00 per share, one-third of which vested upon grant and one-third of which will vest on each anniversary date. His previous consulting agreement was terminated upon execution of the new consulting agreement on September 21, 2007, except that his stock option grant was not terminated.

The Sports Committee is chaired by Lonnie Paulos, M.D. an internationally renowned orthopedic surgeon and researcher. Dr. Paulos is presently a surgeon at the Andrews Institute for Orthopedics & Sports Medicine in Gulf Breeze, Florida. He is the former physician to the Cincinnati Bengals, Cincinnati Reds, US Ski team, and the US Gymnastics Federation.

Under consulting agreements we have entered into with other MiMedx PAB members, we have agreed to compensate each of them with a stock option grant for the purchase of up to 30,000 shares of our Common Stock at $1.00 per share, one-third of which vests upon grant and one-third of which will vest on each of the next two anniversaries of grant. All MiMedx PAB members are also compensated $200 per conference call. Hand Committee members receive $2,000 in per diem compensation, and Sports Committee members receive $2,500 in per diem compensation. The maximum amounts allowed to be paid to PAB members are regulated by the Health Insurance Portability and Accountability Act, which we believe we are in compliance with.

Similarly, SpineMedica has assembled a group of leading orthopedic spine and neurosurgeons who are advising on the development of our spinal implants, instruments and surgical procedures. Our SpineMedica PAB members were compensated with a grant of 25,000 shares of Common Stock, which vested fully upon grant. In addition, each SpineMedica PAB member is compensated $250 per conference call, $2,500 per diem for meetings involving out of town travel, and $1,000 per diem for meetings not involving travel.

The Chairman of the Spine PAB is Randal Betz, M.D. Dr. Betz holds hospital positions as Chief of Staff at Shriners Hospitals for Children and Medical Director of Shriners’ Spinal Cord Injury Unit, in Philadelphia, PA. Additionally, Dr. Betz is on staff at Temple University Children’s Medical Center and is a Professor of Orthopaedic Surgery at Temple University School of Medicine. Dr. Betz entered into a three-year consulting agreement with SpineMedica, effective September 1, 2005. This agreement has been renewed and will expire in September, 2009. Under this agreement, Dr. Betz receives compensation of $50,000 per year and received a stock option grant for the purchase of up to 100,000 shares of our Common Stock at an exercise price of $1.80 per share, which option is now fully vested, and received 50,000 shares of founders’ Common Stock.

SpineMedica also entered into a one-year consulting agreement with another of its PAB members, Carl Lauryssen, M.D., effective June 18, 2007, which automatically renews on a year-to-year basis after its expiration. Under this agreement, Dr. Lauryssen receives compensation of $35,000 per year and received a stock option grant for the purchase of up to 25,000 shares of our Common Stock at an exercise price of $1.80 per share, which option is now fully vested.

Government Regulation

Our products are medical devices subject to extensive regulation by the FDA, under the Federal Food, Drug, and Cosmetic Act. FDA regulations govern, among other things, the following activities that we will perform:

•

product design and development;

•

product testing;

•

product manufacturing;

•

product labeling;

•

product storage;

•

premarket clearance or approval;

•

advertising and promotion;

•

product sales and distribution; and

•

medical device reporting.

Each medical device that we wish to commercially distribute in the U.S. will likely require either 510(k) clearance or Premarket Approval (“PMA”) prior to marketing from the FDA under the Federal Food, Drug, and Cosmetic Act. Devices deemed to pose relatively less risk are placed in either Class I or II, which requires the manufacturer to submit a premarket notification requesting permission for commercial distribution; this is known as 510(k) clearance. Some low risk devices are exempted from this requirement. Devices deemed by the FDA to pose the greatest risk, such as life-sustaining, life-supporting or implantable devices, or devices deemed not substantially equivalent to a previously 510(k) cleared device or a pre-amendment Class III device for which PMA applications have not been called, are placed in Class III requiring PMA approval.

Some of our products contain biologic materials. We believe that the FDA will regulate our products as medical devices. However, the FDA may determine that some of our products are combination products comprised of a biologic and medical device component. For a combination product, the FDA must determine which center or centers within the FDA will review the products and under what legal authority the products will be reviewed. While we believe our products would likely be regulated under the medical device authorities even if they are deemed “combination products,” there can be no assurances that the FDA will agree. In addition, the review of combination products is often more complex and more time consuming than the review of a product under the jurisdiction of only one center within the FDA.

510(k) Clearance Pathway

To obtain 510(k) clearance for one of our products, we must submit a premarket notification demonstrating that the proposed device is substantially equivalent in intended use and in safety and effectiveness to a previously 510(k) cleared device or a device that was in commercial distribution before May 28, 1976 for which the FDA has not yet called for submission of PMA applications. The FDA’s 510(k) clearance pathway usually takes from four to 12 months, but it can take significantly longer for submissions that include clinical data.

After a device receives 510(k) clearance, any modification that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, requires a new 510(k) clearance or could require a PMA approval. The FDA requires each manufacturer to make this determination in the first instance, but the FDA can review any such decision. If the FDA disagrees with a manufacturer’s decision not to seek a new 510(k) clearance, the agency may retroactively require the manufacturer to seek 510(k) clearance or PMA approval.

The FDA also can require the manufacturer to cease marketing and/or recall the modified device until 510(k) clearance or PMA approval is obtained.

PMA Approval Pathway

If 510(k) clearance is unavailable for one of our products, the product must follow the PMA approval pathway, which requires proof of the safety and effectiveness of the device to the FDA’s satisfaction. The PMA approval pathway is much more costly, lengthy and uncertain. It generally takes from one to three years and can take even longer.

A PMA application must provide extensive preclinical and clinical trial data and also information about the device and its components regarding, among other things, device design, manufacturing and labeling. As part of the PMA review, the FDA will typically inspect the manufacturer’s facilities for compliance with Quality System Regulation, or QSR, requirements, which impose elaborate testing, control, documentation and other quality assurance procedures.

Upon submission, the FDA determines if the PMA application is sufficiently complete to permit a substantive review, and, if so, the application is accepted for filing. The FDA then commences an in-depth review of the PMA application, which typically takes one to three years, but may last longer. The review time is often significantly extended as a result of the FDA asking for more information or clarification of information already provided. The FDA also may respond with a “not approvable” determination based on deficiencies in the application and require additional clinical trials that are often expensive and time consuming and can delay approval for months or even years. During the review period, an FDA advisory committee may be convened to review the application and recommend to the FDA whether, or upon what conditions, the device should be approved. Although the FDA is not bound by the advisory panel decision, the panel’s recommendation is important to the FDA’s overall decision making process.

If the FDA’s evaluation of the PMA application is favorable, the FDA typically issues an “approvable letter” requiring the applicant’s agreement to specific conditions (e.g., changes in labeling) or specific additional information (e.g., submission of final labeling) in order to secure final approval of the PMA application. Once the approvable letter is satisfied, the FDA will issue a PMA for the approved indications, which can be more limited than those originally sought by the manufacturer. The PMA can include post approval conditions that the FDA believes necessary to ensure the safety and effectiveness of the device including, among other things, restrictions on labeling, promotion, sale and distribution. Failure to comply with the conditions of approval can result in material adverse enforcement action, including the loss or withdrawal of the approval. Even after approval of a PMA, a new PMA or PMA supplement is required in the event of a modification to the device, its labeling or its manufacturing process.

Clinical Trials

A clinical trial is generally required to support a PMA application and is sometimes required for a premarket notification. Such trials generally require submission of an application for an Investigational Device Exemption, or IDE. The IDE application must be supported by appropriate data, such as animal and laboratory testing results, showing that it is safe to test the device in humans and that the testing protocol is scientifically sound. The IDE must be approved in advance by the FDA for a specified number of patients (unless the product is deemed a nonsignificant risk device eligible for more abbreviated IDE requirements). Clinical trials are subject to extensive monitoring, record keeping and reporting requirements. Clinical trials may begin once the IDE application is approved by the FDA and the appropriate institutional review boards, or IRBs, at the clinical trial sites, and must comply with FDA regulations. To conduct a clinical trial, we also are required to obtain the patients’ informed consent that complies with both FDA requirements and state and federal privacy and human subject protection regulations. We, the FDA or the IRB could suspend a clinical trial at any time for various reasons, including a belief that the risks to study subjects outweigh the anticipated benefits. Even if a trial is completed, the results of clinical testing may not adequately demonstrate the safety and efficacy of the device or may otherwise not be sufficient to obtain FDA approval to market the product in the U.S.

Postmarket

After a device is placed on the market, numerous regulatory requirements apply. These include: the Quality System Regulation, which requires manufacturers to follow elaborate design, testing, control, documentation and other quality assurance procedures during the manufacturing process; labeling regulations; the FDA’s general prohibition against promoting products for unapproved or “off-label” uses; and the Medical Device Reporting regulation, which requires that manufacturers report to the FDA if their device may have caused or contributed to a death or serious injury or malfunctioned in a way that would likely cause or contribute to a death or serious injury if it were to recur. Class II devices also can have special controls such as performance standards, postmarket surveillance, patient registries, and FDA guidelines that do not apply to Class I devices.

We are subject to inspection and marketing surveillance by the FDA to determine our compliance with regulatory requirements. If the FDA finds that we have failed to comply, it can institute a wide variety of enforcement actions, ranging from a public warning letter to more severe sanctions such as:

•

fines, injunctions, and civil penalties;

•

recall or seizure of our products;

•

operating restrictions, partial suspension or total shutdown of production;

•

refusing our requests for 510(k) clearance or PMA approval of new products;

•

withdrawing 510(k) clearance or PMA approvals already granted; and

•

criminal prosecution.

The FDA also has the authority to require repair, replacement or refund of the cost of any medical device that we have manufactured or distributed.

International

International sales of medical devices are subject to foreign government regulations, which vary substantially from country to country. The time required to obtain approval by a foreign country may be longer or shorter than that required for FDA approval, and the requirements may differ. In addition, the export by us of certain of our products that have not yet been cleared or approved for domestic distribution may be subject to FDA export restrictions. There can be no assurance that we will receive on a timely basis, if at all, any foreign government or United States export approvals necessary for the marketing of our products abroad.

The primary regulatory environment in Europe is that of the European Union, which consists of twenty-seven countries, encompassing most of the major countries in Europe. Other countries, such as Switzerland, have voluntarily adopted laws and regulations that mirror those of the European Union with respect to medical devices. The European Union has adopted numerous directives and standards regulating design, manufacture, clinical trials, labeling, and adverse event reporting for medical devices. Devices that comply with the requirements of a relevant directive will be entitled to bear a CE mark and can be commercially distributed throughout Europe. The method of assessing conformity varies depending on the class of the product, but normally involves a combination of self-assessment by the manufacturer and a third party assessment by a “Notified Body.” This third party assessment may consist of an audit of the manufacturer’s quality system and specific testing of the manufacturer’s product. An assessment by a Notified Body in one country within the European Union is required in order for a manufacturer to commercially distribute the product throughout the European Union.

Export of Uncleared or Unapproved Devices

Export of devices eligible for the 510(k) clearance process, but not yet cleared to market, are permitted without FDA approval, provided that certain requirements are met. Unapproved devices subject to the PMA process can be exported to any country without FDA approval provided that, among other things, they are not contrary to the laws of the country to which they are intended for import, they are manufactured in substantial compliance with the QS Regs., and they have been granted valid marketing authorization by any member country of the European Union, Australia, Canada, Israel, Japan, New Zealand, Switzerland or South Africa. If these conditions are not met, FDA approval must be obtained, among other things, by demonstrating to the FDA that the product is approved for import into the country to which it is to be exported and, in some cases, by providing safety data for the device. There can be no assurance that the FDA will grant export approval when necessary or that countries to which the device is to be exported will approve the device for import. Our failure to obtain necessary FDA export authorization and/or import approval could have a material adverse effect on our business, financial condition and results of operation.

Regulatory Status of our Products

On April 20, 2009, the Company received FDA clearance to market the Paradís Vaso Shield™ device, indicated for use as a cover for vessels following anterior vertebral surgery. The proprietary, patented, and PVA based membrane may reduce the risk of associated injury following anterior vertebral surgeries by providing a vessel cover. We have not received regulatory approval from the FDA regarding the regulatory pathway for any of our other products (i.e. pre-510(k) or pre-IDE meetings). Both MiMedx and SpineMedica have products under development that may qualify for 510(k), such as NDGA-polymerized collagen implants and additional sheet products made from PVA-based hydrogel.

Reimbursement—Procedures, Profitability and Costs

Private and third-party payors often follow Medicare reimbursement policies, and these policies often follow FDA approval by one to two years, or more.

Arthroscopy and soft tissue repair are often profitable procedures for hospitals and surgery centers. This profit translates to incentive for medical professionals, hospitals and clinics to continue to leverage the return by prescribing arthroscopic procedures for the repair of soft tissue treatments over open procedures. Open surgical procedures often result in multi-night stays and consistently lower reimbursement rates.

According to The Ortho FactBook, many orthopedic procedures are currently not profitable for hospitals and surgery centers, such as the Total Hip Replacement, for which hospitals and surgery centers are reimbursed $3,214 less than their costs.

We are currently working with industry reimbursement consultants to aid in the reimbursement planning for our products. However, at this time there can be no assurance that reimbursement policies will provide an acceptable return on our products.

Competition

MiMedx Products

In the US in 2007, approximately 2,090,000 orthopedic soft tissue repair procedures were performed. This procedure volume is growing at a rate of 4.5 % supported by the rising number of sports-related injuries, particularly among the increasingly active aging population. Source: (US Markets for Orthopedic Soft Tissue Solutions 2008, Millennium Research Group)

There are currently a large number of devices on the market used to reinforce surgically repaired soft tissues. These include hardware (screws, pins, disposables) as well as allografts, synthetic products and xenografts (derived from porcine, bovine and equine tissues).

Leading Competitors in the Orthopedic Soft Tissue Solutions Market, as a % of Total, US, 2007.

		Percent of US total Soft Tissue
Leading Competitors		Market
Arthrex			33.8	%
DePuy Mitek			17.1	%
Smith and Nephew			13.2	%
CONMED Linvatec			5.8	%
Genzyme Biosurgery			3.4	%
Musculoskeletal Transplant Foundation			3.2	%
Biomet Sports Medicine			3.1	%
AlloSource			2.7	%
ArthroCare			2.1	%
LifeNet Health			1.9	%
Other			13.7	%

There are several technologies currently on the market or anticipated to enter the market for ligament and tendon repair and/or replacements. Those technologies include collagen matrices, cell-seeded polymer scaffolds, cryopreserved allografts, fibroblast-seeded ligament analogs, and small intestinal submucosa.

Competitors who market collagen based devices currently include:

Developer		Product		Cross-linking
DePuy		RESTORE		None
Wright Medical Technology		GraftJacket		None
Pegasus		OrthAdapt		Carbodiimide
ReGen Biologics		Collagen matrices		None
Biomet/Organogenesis		CuffPatch		Carbodiimide

The above technologies may or may not utilize cross-linking agents, which are FDA-approved and used in the manufacturing of collagen for soft-tissue repair. The current market leader is the Restore Orthobiologic Soft Tissue Implant from DePuy. It utilizes small intestinal submucosa of porcine origin. We believe our collagen fiber-based devices will provide better reinforcement for tendon and ligament repair because they are made of high strength cross-linked collagen fibers and, by mimicking the natural fiber orientation in tendons and ligaments, they provide targeted mechanical properties equivalent to those of tendons and ligaments.

There are a few synthetic products, such as W.L. Gore’s GoreTex, 3M Kennedy Ligament Augmentation Device (“LAD”), and Stryker’s Meadox Dacron Ligament Augmentation Graft which were developed for use in Anterior Cruciate Ligament (ACL) reconstruction. These were first and second generation soft-tissue repair products and generally produce results that we believe are less satisfactory than those containing soft-tissue constructs, because the materials tend to stretch and become deformed over time.

SpineMedica Products

Orthopaedic spine and neurosurgeons actively seek patient treatment alternatives and utilize various technologies during different stages of the patient care continuum. Until the recent success of non-fusion technologies, spine implant market manufacturers have focused almost exclusively on refining and improving spinal fusion techniques. Multiple fusion techniques and products are available to patients today.

However, regardless of the type of surgery, fusion or TDR, physicians commonly deal with venous injury during anterior spinal revision surgery. Currently, competition for vessel guards for this specific application is limited. W.L. Gore & Associates, Inc. is the dominant player in this area.

Level Products

In 2008, the leading suppliers of Orthopedic-Extremities products included Ascension Orthopedics, Biomet, DJO Surgical (DJO Global), Exactech, DePuy Orthopedics (Johnson & Johnson), Integra Lifesciences, Small Bone Innovations, Stryker, Synthes, Tornier S.A., Wright Medical, Zimmer and a bevy of other start ups. In 2006, the combined market shares of Stryker, Synthes, DePuy, and Zimmer accounted for 65% of the US Orthopedic-Extremity device market with Stryker dominating the bone cement, DePuy with a broad range of arthroplasty and arthrodesis products, Synthes with trauma products and Zimmer with strong positions in elbow, shoulder, and bone cement.

Collaborations and License Agreements

License Agreement between MiMedx, Shriners Hospitals for Children, and University of South Florida Research Foundation

We entered into a license agreement with Shriners Hospitals for Children and University of South Florida Research Foundation (collectively “Licensor”) in January 2007 for the worldwide, exclusive rights for all applications using NDGA-polymerized materials, including for reconstruction of soft tissue. We paid a one-time license fee of $100,000, plus 1,120,000 shares of our Common Stock, and the Licensor will receive future additional milestone payments and continuing royalties based on sales of all licensed products.

License Agreement between SpineMedica and SaluMedica, LLC

In August 2005, we entered into an exclusive, perpetual, worldwide, non-terminable, royalty-free, transferable license of certain patents and patent application rights held by SaluMedica, LLC that relate to a PVA-based hydrogel. SpineMedica has the right to manufacture, market, use and sell medical devices and products incorporating the claimed technology for all neurological and orthopedic uses related to the human spine, including muscular and skeletal uses. Some of the licensed patents and patent application rights are owned by SaluMedica, LLC and at least one of these patent and patent application rights are licensed by SaluMedica, LLC from Georgia Tech Research Corporation. In connection with this license agreement, SpineMedica also acquired certain of SaluMedica, LLC’s assets, including manufacturing and testing equipment and office equipment and obtained a license to use the trademarks “SaluMedica™” and “Salubria^® biomaterial.”

License Agreement between SaluMedica, LLC and Georgia Tech Research Corporation

Some of the patents and patent application rights licensed to SpineMedica by SaluMedica, LLC are licensed to SaluMedica, LLC from Georgia Tech Research Corporation. SaluMedica, LLC and Georgia Tech Research Corporation have agreed that in the event the license agreement between them is terminated for any reason (other than the expiration of the patents), Georgia Tech Research Corporation will license the technology to SpineMedica for uses related to the human spine on substantially the same terms as granted to SaluMedica, LLC without further payment.

Hand License with SaluMedica, LLC

MiMedx has a Technology License Agreement, as amended by a First Amendment to Technology License Agreement, as well as a related Trademark License Agreement, all dated August 3, 2007 (collectively, the “Hand License”) that provides MiMedx with the exclusive, fully-paid, worldwide, royalty-free, irrevocable and non-terminable (except as provided in the Hand License), and sublicensable rights to develop, use, manufacture, market, and sell Salubria^® biomaterial or similar PVA-based hydrogels for all neurological and orthopedic uses (including muscular and skeletal uses) related to the rotator cuff and the hand (excluding the wrist), but excluding the product SaluBridge (which is made from Salubria^® biomaterial and is currently approved for use by the FDA) (the “Licensed Hand IP”). SaluMedica, LLC’s rights in the Licensed Hand IP derive from and are subject to one or more licenses from Georgia Tech Research Corporation and, consequently, the Hand License is subject to those same licenses.

Surgical Sheet License with SaluMedica, LLC

On March 31, 2008, we entered into an exclusive world-wide license with SaluMedica, LLC for a PVA-based hydrogel biomaterial for applications as a surgical sheet. The license covers both internal and external applications. In exchange for the exclusive, worldwide, perpetual license to develop, manufacture, and sell the “surgical sheet” technology for application anywhere in the body, we issued SaluMedica, LLC 400,000 shares of restricted Common Stock. In addition, SaluMedica, LLC is eligible to receive up to an aggregate additional 600,000 shares of restricted Common Stock if certain sales and revenue milestones are achieved not later than June 30, 2013.

Intellectual Property

Our intellectual property includes licensed patents, owned and licensed patent applications and patents pending, proprietary manufacturing processes and trade secrets, brands, trademarks and trade names associated with our technology. Furthermore, we require employees, consultants and advisors to sign Proprietary Information and Inventions Agreements as well as Nondisclosure Agreements that assign and protect the intellectual property existing and generated from their work to us and that we may use and own exclusively.

The pending and provisional patent applications may not issue into patents, as is true with any provisional or patent application.

MiMedx Intellectual Property

Our MiMedx intellectual property, includes two licensed and issued patents, eight licensed patent applications and two licensed provisional patent applications, as well as proprietary manufacturing processes and trade secrets, related to NDGA coatings, devices, scaffolds, substrates, or other materials and polymer treated collagen material for medical devices, implants, prosthesis and constructs. The licensed patents protecting the NDGA Polymer Composite, rather than being limited to specific products, provide broad process compatibility and protection.

SpineMedica Intellectual Property

Our Spinemedica intellectual property includes two licensed and issued patents, eleven owned patent applications and one co-owned (with Salumedica, LLC) patent application, and six licensed patent applications related to products and technology intended for, but not limited to, the Orthopedic-Spine market.

Improvements to Technology

Any improvements to Salubria^® developed by SaluMedica, LLC during the life of the licensed patents are included as part of the license from SaluMedica, LLC. SpineMedica will own all improvements to Salubria^® that we develop. However, SpineMedica will license these improvements to SaluMedica, LLC for no additional consideration, provided that the use of these improvements must be unrelated to all neurological and orthopedic uses, including muscular and skeletal uses, related to the human spine.

Level Intellectual Property

Our Level intellectual property includes eight patent applications pending and two provisional patent applications related to a broad range of novel concepts intended for indications in the Orthopedics-Extremity market, which includes the fingers and thumb, wrist, arm, and elbow, as well as the foot and ankle. Five applications address fracture fixation; two applications address joint replacement (arthroplasty) of the small joints of the hand and one patent has been filed to address fusion (arthrodesis) of small joints. Additionally two provisional patents have been filed that address fracture fixation as well as arthroplasty systems.

Trademarks & Trade Names

We also own trademark and trade name registration of the mark Paradís Vaso Shield™ and license the SaluMedica™ and Salubria^® trademarks.

Manufacturing

MiMedx conducts operations, performs research and development activities and manufactures its proprietary cross-linked collagen products in its office and lab space, in Tampa, Florida. In the future, we may contract with third parties to perform manufacturing of the products that are developed and enter into strategic relationships for sales and marketing of products that we develop.

SpineMedica conducts operations, performs research and development activities and manufactures its PVA based hydrogel products in its office and lab space in Marietta, Georgia.

We are subject to the FDA’s quality system regulations, state regulations, and regulations promulgated by the European Union. For our implants and instruments, we plan to be FDA registered, CE marked and ISO certified. Our facilities are subject to periodic unannounced inspections by regulatory authorities, and may undergo compliance inspections conducted by the FDA and corresponding state and foreign agencies.

Suppliers

We have identified reliable sources and suppliers of collagen, source materials of NDGA, which we believe will provide a product in compliance with FDA guidelines. SpineMedica engages in the manufacture of its own hydrogel products and accessibility to critical raw materials for the PVA-based biomaterial products is not inhibited by supply or market constraints.

Marketing and Sales

We plan to utilize our experienced management team to commercialize these medical technologies by advancing them through the proper regulatory approval processes, developing or arranging for reliable and cost-effective manufacturing, and to either sell or license the product lines to others or market and sell the products.

Employees

As of June 10, 2009, we have 37 employees, of whom 35 are full-time and 2 are part-time employees. We consider our relationships with our employees to be satisfactory. None of our employees is covered by a collective bargaining agreement.

Litigation

We are not involved in any litigation, nor are we aware of any threatened litigation.

Research and Development

Our research and development efforts are focused on developing products for the foot and ankle, shoulder, elbow, knee, hand, wrist, and thumb using NDGA biomaterials, and development of other sheet based spine products and other sheet products using a PVA-based hydrogel. Our research and development staff currently consists of 11 employees. To support development, we have contracts with outside labs who aid us in our research and development process. Our research and development group has extensive experience in developing products related to our field of interest, and works with our Physician Advisory Boards to design products that are intended to improve patient outcomes, simplify techniques, shorten procedures, reduce hospitalization and rehabilitation times and, as a result, reduce costs. From our inception in November 2006 to March 31, 2009, we have spent approximately $6,150,000 on research and development and $7,177,000 on acquired in-process research and development. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations” at Item 7 below for information regarding expenditures for research and development in each of the last two fiscal years.

Surgeon Training and Education

We devote significant resources to working with our Physician Advisory Boards. We believe that the most effective way to introduce and build market demand for our products will be by partnering with leading surgeons from around the globe in the use of our products. We have access to state-of-the-art cadaver operating theaters and other training facilities at some of the nation’s leading medical institutions. We intend to continue to focus on working with leading surgeons in the United States. See “Business-Physician Advisory Boards.”

Environmental Compliance

We will incur significant costs in complying with good manufacturing practices and safe handling and disposal of materials used in our research and manufacturing activities. We do not anticipate the costs to comply with Federal, state and local environmental laws and regulations will be material.

Available Information

Our website address is www.mimedx.com. We make available on this website under “Investor Relations — SEC Filings,” free of charge, our proxy statements, annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports as soon as reasonably practicable after we electronically file or furnish such materials to the U.S. Securities and Exchange Commission (“SEC”). In addition, we post filings of Forms 3, 4, and 5 filed by our directors, executive officers and ten percent or more shareholders. We also make available on this website under the heading “Investor Relations — Corporate Governance” our Code of Business Conduct and Ethics.

Item 1A. Risk Factors

Risks Related to Our Business and Industry

We are a high-risk startup venture.

We are in the development stage. We do not currently have any material assets, other than cash, certain laboratory equipment, and certain intellectual property rights. We have 37 employees, of whom 35 are full-time and 2 are part-time employees. Our business and prospects must be evaluated in light of the expenses, delays, uncertainties and complications typically encountered by development stage businesses, many of which may be beyond our control. These include, but are not limited to, lack of sufficient capital, unanticipated problems, delays or expenses relating to product development, governmental approvals, and licensing and marketing activities, competition, technological changes and uncertain market acceptance. In addition, if we are unable to manage growth effectively, our operating results could be materially and adversely affected. We must overcome these and other business risks to be successful. Our efforts may not be successful. We may never be profitable. Therefore, investors could lose their entire investment.

We are in the early stage of product development.

We have only had one product cleared by the FDA for market. The possible products we have rights to have had only limited research in the fields of use we presently intend to commercialize. We will have to go through extensive research and testing to determine the safety and effectiveness of their proposed use. Our product candidates will require testing and regulatory clearances. Accordingly, most of the products we are developing are not yet ready for sale and may never be ready for sale. The successful development of any products is subject to the risks of failure inherent in the development of products based on innovative technologies. These risks include the possibilities that any or all of these proposed products or procedures are found to be ineffective or toxic, or otherwise fail to receive necessary regulatory clearances; that the proposed products or procedures are uneconomical to market or do not achieve broad market acceptance; that third parties hold proprietary rights that preclude us from marketing them; or third parties market a superior or equivalent product. We are unable to predict whether our research and development activities will result in any commercially viable products or procedures. Furthermore, due to the extended testing and regulatory review process required before marketing clearances can be obtained, the time frames for commercialization of any products or procedures are long and uncertain.

Our financial condition raises substantial doubt about our ability to continue as a going concern.

As of March 31, 2009, we had approximately $35,000 of cash or cash equivalents on hand. In April 2009, the Company commenced a private placement to sell 3% Convertible Senior Secured Promissory Notes (the “Notes”) to accredited investors. Thru June 10, 2009, the Company has received aggregate proceeds of $3,322,000 under this arrangement and estimates, assuming it receives no additional funds, that it has sufficient funds to operate for the next ninety days or through mid September 2009. If we fail to obtain additional capital in the immediate future, we will have to terminate our planned business operations, in which case the investors will lose all or part of their investment. If we default on our Notes, the holders could foreclose on our property and investors could lose all or part of their investment.

Continuing disruptions in the overall economy and the credit and financial markets may adversely impact our ability to raise necessary additional capital.

The capital and credit markets continue to be very volatile as a result of adverse conditions that have caused the failure and near failure of a number of large financial services companies. If the capital and credit markets continue to experience volatility and the availability of funds remains limited, it is possible that our ability to access the capital and credit markets may be limited or nonexistent because of these or other factors, and we require additional capital in the near future in order to continue operations.

We will need additional financing to meet our future capital requirements.

We will require significant additional funds, either through additional equity or debt financings or collaborative agreements or from other sources to engage in research and development activities with respect to our potential product candidates and to establish the personnel necessary to successfully manage us. We believe that our current cash and cash equivalents will be sufficient to meet our projected operating requirements for at least the next ninety days or through mid September 2009. However, obtaining the required regulatory approvals and clearances and the planned expansion of our business will be expensive and time-consuming and we will in the future seek funds from public and private stock or debt offerings, borrowings under lines of credit or other sources. Our capital requirements will depend on many factors, including:

•

the revenues generated by sales of our products, if any;

•

the costs associated with expanding our sales and marketing efforts, including efforts to hire independent agents and sales representatives;

•

the expenses we incur in developing and commercializing our products, including the cost of obtaining and maintaining FDA or other regulatory approvals; and

•

unanticipated general and administrative expenses.

As a result of these factors, we must raise additional funds now and in the future and such funds may not be available on favorable terms, or at all. Furthermore, if we issue equity or debt securities to raise additional funds, our existing shareholders may experience dilution and the new equity or debt securities we issue may have rights, preferences and privileges senior to those of our existing shareholders. In addition, if we raise additional funds through collaboration, licensing or other similar arrangements, it may be necessary to relinquish valuable rights to our products or proprietary technologies, or grant licenses on terms that are not favorable to us. If we cannot raise funds on acceptable terms, we may not be able to develop or enhance our products, obtain the required regulatory clearances or approvals, execute our business plan, take advantage of future opportunities, or respond to competitive pressures or unanticipated customer requirements. Any of these events could adversely affect our ability to achieve our development and commercialization goals, which could have a material and adverse effect on our business, results of operations and financial condition.

We expect to continue to incur losses through most of 2010.

We have a limited operating history, and we have not generated any revenues from our products. Further, we have incurred losses since inception. We expect to incur losses for the foreseeable future. The principal causes of our losses are likely to be primarily attributable to personnel costs, working capital costs, research and development costs, brand development costs and marketing and promotion costs. We may never achieve profitability.

We are in a highly competitive industry and face competition from large, well-established medical device manufacturers as well as new market entrants.

Competition from other medical device companies and from research and academic institutions is intense, expected to increase, subject to rapid change, and significantly affected by new product introductions and other market activities of industry participants. In addition to competing with universities and other research institutions in the development of products, technologies and processes, we compete with other companies in acquiring rights to products or technologies from those institutions. There can be no assurance that we can develop products that are more effective or achieve greater market acceptance than competitive products, or that our competitors will not succeed in developing or acquiring products and technologies that are more effective than those being developed by us, that would render our products and technologies less competitive or obsolete.

With respect to the market for total disc implants, we expect to compete with Synthes Spine and Medtronic Sofamor Danek, which have significantly greater resources and longer operating histories than us.

Our competitors enjoy several competitive advantages over us, including some or all of the following:

•

products which have been approved by regulatory authorities for use in the United States and/or Europe and which are supported by long-term clinical data;

•

significantly greater name recognition;

•

established relations with surgeons, hospitals, other healthcare providers and third party payors;

•

large and established distribution networks in the United States and/or in international markets;

•

greater experience in obtaining and maintaining regulatory approvals and/or clearances from the United States Food and Drug Administration and other regulatory agencies;

•

more expansive portfolios of intellectual property rights; and

•

greater financial, managerial and other resources for products research and development, sales and marketing efforts and protecting and enforcing intellectual property rights.

Our competitors’ products will compete directly with our products if and when ours can be marketed. In addition, our competitors as well as new market entrants may develop or acquire new treatments, products or procedures that will compete directly or indirectly with our products. The presence of this competition in our market may lead to pricing pressure which would make it more difficult to sell our products at a price that will make us profitable or prevent us from selling our products at all. Our failure to compete effectively in the market for spine surgery products would have a material and adverse effect on our business, results of operations and financial condition.

Our ability to protect our intellectual property and proprietary technology through patents and other means is uncertain and may be inadequate, which would have a material and adverse effect on us.

Our success depends significantly on our ability to protect our proprietary rights to the technologies used in our products. We rely on patent protection, as well as a combination of copyright, trade secret and trademark laws and nondisclosure, confidentiality and other contractual restrictions to protect our proprietary technology, including our licensed technology. However, these legal means afford only limited protection and may not adequately protect our rights or permit us to gain or keep any competitive advantage. For example, our pending United States and foreign patent applications (and those we have or will have licensees to) may not issue as patents in a form that will be advantageous to us or may issue and be subsequently successfully challenged by others and invalidated. In addition, our pending patent applications include claims to material aspects of our products and procedures that are not currently protected by issued patents. Both the patent application process and the process of managing patent disputes can be time consuming and expensive. Competitors may be able to design around our patents or develop products which provide outcomes which are comparable or even superior to ours. Although we have taken steps to protect our intellectual property and proprietary technology, including entering into confidentiality agreements and intellectual property assignment agreements with some of our officers, employees, consultants and advisors, such agreements may not be enforceable or may not provide meaningful protection for our trade secrets or other proprietary information in the event of unauthorized use or disclosure or other breaches of the agreements. Furthermore, the laws of foreign countries may not protect our intellectual property rights to the same extent as do the laws of the United States.

In the event a competitor infringes upon our licensed or pending patent or other intellectual property rights, enforcing those rights may be costly, uncertain, difficult and time consuming. Even if successful, litigation to enforce our intellectual property rights or to defend our patents against challenge could be expensive and time consuming and could divert our management’s attention. We may not have sufficient resources to enforce our intellectual property rights or to defend our patents rights against a challenge. The failure to obtain patents and/or protect our intellectual property rights could have a material and adverse effect on our business, results of operations, and financial condition.

We may become subject to claims of infringement or misappropriation of the intellectual property rights of others, which could prohibit us from developing our products, require us to obtain licenses from third parties or to develop non-infringing alternatives, and subject us to substantial monetary damages.

Third parties could, in the future, assert infringement or misappropriation claims against us with respect to products we develop. Whether a product infringes a patent or misappropriates other intellectual property involves complex legal and factual issues, the determination of which is often uncertain. Therefore, we cannot be certain that we have not infringed the intellectual property rights of others. Our potential competitors may assert that some aspect of our product infringes their patents. Because patent applications may take years to issue, there also may be applications now pending of which we are unaware that may later result in issued patents that our products infringe. There also may be existing patents or pending patent applications of which we are unaware that our products may inadvertently infringe.

Any infringement or misappropriation claim could cause us to incur significant costs, place significant strain on our financial resources, divert management’s attention from our business and harm our reputation. If the relevant patents in such claim were upheld as valid and enforceable and we were found to infringe, we could be prohibited from selling any product that is found to infringe unless we could obtain licenses to use the technology covered by the patent or are able to design around the patent. We may be unable to obtain such a license on terms acceptable to us, if at all, and we may not be able to redesign our products to avoid infringement. A court could also order us to pay compensatory damages for such infringement, plus prejudgment interest and could, in addition, treble the compensatory damages and award attorney fees. These damages could be substantial and could harm our reputation, business, financial condition and operating results. A court also could enter orders that temporarily, preliminarily or permanently enjoin us and our customers from making, using, or selling products, and could enter an order mandating that we undertake certain remedial activities. Depending on the nature of the relief ordered by the court, we could become liable for additional damages to third parties.

Our patents and licenses may be subject to challenge on validity grounds, and our patent applications may be rejected.

We rely on our patents, patent applications, licenses and other intellectual property rights to give us a competitive advantage. Whether a patent is valid, or whether a patent application should be granted, is a complex matter of science and law, and therefore we cannot be certain that, if challenged, our patents, patent applications and/or other intellectual property rights would be upheld. If one or more of those patents, patent applications, licenses and other intellectual property rights are invalidated, rejected or found unenforceable, that could reduce or eliminate any competitive advantage we might otherwise have had.

The prosecution and enforcement of patents licensed to us by third parties are not within our control, and without these technologies, our product may not be successful and our business would be harmed if the patents were infringed or misappropriated without action by such third parties.

We have obtained licenses from third parties for patents and patent application rights related to the products we are developing, allowing us to use intellectual property rights owned by or licensed to these third parties. We do not control the maintenance, prosecution, enforcement or strategy for many of these patents or patent application rights and as such are dependent in part on the owners of the intellectual property rights to maintain their viability. Without access to these technologies or suitable design-around or alternative technology options, our ability to conduct our business could be impaired significantly.

Our NDGA License Agreement could be terminated.

Under our license agreement with Shriners Hospitals for Children and University of South Florida Research Foundation dated January 29, 2007, it is possible for the licensor to terminate the agreement if we breach the license agreement and all of our cure rights are exhausted. If our license agreement were to be terminated, it would have a negative impact on our business.

We may be subject to damages resulting from claims that we, our employees, or our independent contractors have wrongfully used or disclosed alleged trade secrets of others.

Some of our employees were previously employed at other medical device companies. We may also hire additional employees who are currently employed at other medical device companies, including our competitors. Additionally, consultants or other independent agents with which we may contract may be or have been in a contractual arrangement with one or more of our competitors. Although no claims against us are currently pending, we may be subject to claims that these employees or independent contractors have used or disclosed any party’s trade secrets or other proprietary information. Litigation may be necessary to defend against these claims. Even if we are successful in defending against these claims, litigation could result in substantial costs and be a distraction to management. If we fail to defend such claims, in addition to paying monetary damages, we may lose valuable intellectual property rights or personnel. A loss of key personnel or their work product could hamper or prevent our ability to market existing or new products, which could severely harm our business.

SaluMedica, LLC may license the PVA-based hydrogel, the material used to make SpineMedica’s products and other products we are developing, and its trademark to third parties for use in applications unrelated to the spine, hand, rotator cuff, or surgical sheet applications. This may expose us to adverse publicity if these uses are not proven safe and effective.

Our licenses with SaluMedica, LLC allows us to use technology and/or know-how related to the material used to manufacture our applications related to the spine and other products we are developing in applications related to the hand and rotator cuff and surgical sheet, and allows us to use the Salubria^® biomaterial trademark. SaluMedica, LLC may license the PVA-based hydrogel and rights related to the Salubria^® biomaterial trademark to third parties for applications not related to the spine, hand, rotator cuff, or surgical sheet. If the use of Salubria^® biomaterial or the PVA-based hydrogel by these third parties results in product liability claims or has other adverse effects in patients, surgeons and patients may associate these claims and effects with our products, even if our products are nevertheless proven safe and effective. If Salubria^® biomaterial experiences adverse publicity or is not proven safe and effective in other applications, sales of our products could be harmed.

We depend on key personnel.

We currently have 35 full-time and 2 part-time employees. Our success will depend, in part, upon our ability to attract and retain additional skilled personnel, which will require substantial additional funds. There can be no assurance that we will be able to find and attract additional qualified employees or retain any such personnel. Our inability to hire qualified personnel, the loss of services of our key personnel, or the loss of services of executive officers or key employees that that may be hired in the future may have a material and adverse effect on our business.

In addition, some of our executives and other employees only work for us on a part-time basis, and there is no assurance that they will be able to devote sufficient time to our operations to ensure optimal success.

Our operating results may fluctuate significantly as a result of a variety of factors, many of which are outside of our control.

We are subject to the following factors, among others, that may negatively affect our operating results:

•

the announcement or introduction of new products by our competitors;

•

our ability to upgrade and develop our systems and infrastructure to accommodate growth;

•

our ability to attract and retain key personnel in a timely and cost effective manner;

•

technical difficulties;

•

the amount and timing of operating costs and capital expenditures relating to the expansion of our business, operations and infrastructure;

•

regulation by federal, state or local governments; and

•

general economic conditions as well as economic conditions specific to the healthcare industry.

As a result of our limited operating history, limited resources, and the nature of the markets in which we compete, it is extremely difficult for us to forecast accurately. We have based our current and future expense levels largely on our investment plans and estimates of future events although certain of our expense levels are, to a large extent, fixed. Assuming our products reach the market, we may be unable to adjust spending in a timely manner to compensate for any unexpected revenue shortfall. Accordingly, any significant shortfall in revenues relative to our planned expenditures would have an immediate adverse effect on our business, results of operations and financial condition. Further, as a strategic response to changes in the competitive environment, the Company may from time to time make certain pricing, service or marketing decisions that could have a material and adverse effect on our business, results of operations and financial condition. Due to the foregoing factors, our revenues and operating results are and will remain difficult to forecast.

The failure of government health administrators and private health insurers to reimburse patients for costs of services incorporating our potential products would materially and adversely affect our business.

Our success depends, in part, on the extent to which reimbursement for the costs of products to users will be available from government health administration authorities, private health insurers and other organizations. Significant uncertainty usually exists as to the reimbursement status of newly approved healthcare products. Adequate third party insurance coverage may be unavailable for us, our sublicensees or corporate partners to establish and maintain price levels sufficient for realization of an appropriate return on investment. Government and other third-party payers attempt to contain healthcare costs by limiting both coverage and the level of reimbursement of new products. Therefore, we cannot be certain that our products or the procedures performed with them will be covered or adequately reimbursed and thus we may be unable to sell our products profitably if third-party payors deny coverage or reduce their levels of payment below that which we project, or if our production costs increase at a greater rate than payment levels. If government and other third party payers do not provide adequate coverage and reimbursement for uses of the products incorporating our technology, the market’s acceptance of our products could be adversely affected.

We currently have only one product cleared by the FDA for marketing, and may never develop or launch, any commercialized products.

We currently do not have any commercialized products or any significant source of revenue. We have invested substantially all of our time and resources in developing various products. Commercialization of these products, including NDGA and PVA-based hydrogel products will require additional development, clinical evaluation, regulatory approval, significant marketing efforts and substantial additional investment before they can provide us with any revenue. Despite our efforts, our products may not become commercially successful products for a number of reasons, including:

•

we may not be able to obtain regulatory approvals for our products, or the approved indication may be narrower than we seek;

•

our products may not prove to be safe and effective in clinical trials;

•

physicians may not receive any reimbursement from third party payors, or the level of reimbursement may be insufficient to support widespread adoption of our products;

•

we may experience delays in our development program;

•

any products that are approved may not be accepted in the marketplace by physicians or patients;

•

we may not be able to manufacture any of our products in commercial quantities or at an acceptable cost; and

•

rapid technological change may make our products obsolete.

We face the risk of product liability claims or recalls and may not be able to obtain or maintain adequate product liability insurance.

Our business exposes us to the risk of product liability claims that are inherent in the testing, manufacturing and marketing of medical devices, including those which may arise from the misuse or malfunction of, or design flaws in, our products. We may be subject to such claims if our products cause, or appear to have caused, an injury. Claims may be made by patients, healthcare providers or others selling our products. Defending a lawsuit, regardless of merit, could be costly, divert management attention and result in adverse publicity, which could result in the withdrawal of, or reduced acceptance of, our product in the market.

Although we have product liability insurance that we believe is adequate, this insurance is subject to deductibles and coverage limitations and we may not be able to maintain this insurance. If we are unable to maintain product liability insurance at an acceptable cost or on acceptable terms with adequate coverage or otherwise protect ourselves against potential product liability claims, we could be exposed to significant liabilities, which may harm our business. A product liability claim or other claim with respect to uninsured liabilities or for amounts in excess of insured liabilities could result in significant costs and significant harm to our business.

If we are unable to establish sales, marketing and distribution capabilities or enter into and maintain arrangements with third parties to sell, market and distribute our products, our business may be harmed.

We do not have a sales organization, and have no experience as a company in the marketing and distribution of medical devices. To achieve commercial success for our products, we must sell rights to our product lines at favorable prices, develop a sales and marketing force, or enter into arrangements with others to market and sell our products. In addition to being expensive, developing such a sales force is time consuming, and could delay or limit the success of any product launch. We may not be able to develop this capacity on a timely basis or at all. Qualified direct sales personnel with experience in the medical device market are in high demand, and there is no assurance that we will be able to hire or retain an effective direct sales team. Similarly, qualified independent medical device representatives both within and outside the United States are in high demand, and we may not be able to build an effective network for the distribution of our product through such representatives. We have no assurance that we will be able to enter into contracts with representatives on terms acceptable to us. Furthermore, there is no assurance that we will be able to build an alternate distribution framework should we attempt to do so.

We may also need to contract with third parties in order to market our products. To the extent that we enter into arrangements with third parties to perform marketing and distribution services, our product revenue could be lower and our costs higher than if we directly marketed our products. Furthermore, to the extent that we enter into co-promotion or other marketing and sales arrangements with other companies, any revenue received will depend on the skills and efforts of others, and we do not know whether these efforts will be successful. If we are unable to establish and maintain adequate sales, marketing and distribution capabilities, independently or with others, we will not be able to generate product revenue, and may not become profitable.

To be commercially successful, we must convince surgeons that our products are safe and effective alternatives to existing surgical treatments and that our products should be used in their procedures.

We believe surgeons may not widely adopt our products unless they determine, based on experience, clinical data and published peer reviewed journal articles, that the use of our products in a particular procedure is a favorable alternative to conventional methods. Surgeons may be slow to change their medical treatment practices for the following reasons, among others:

•

their lack of experience with prior procedures in the field using our products;

•

lack of evidence supporting additional patient benefits and our products over conventional methods;

•

perceived liability risks generally associated with the use of new products and procedures;

•

limited availability of reimbursement from third party payors; and

•

the time that must be dedicated to training.

In addition, we believe recommendations for and support of our products by influential surgeons are essential for market acceptance and adoption. If we do not receive this support or if we are unable to demonstrate favorable long-term clinical data, surgeons and hospitals may not use our products which would significantly reduce our ability to achieve expected revenues and would prevent us from becoming profitable.

Any failure in our efforts to train surgeons could significantly reduce the market acceptance of our products.

There will be a learning process involved for surgeons to become proficient in the use of our products. It will be critical to the success of our commercialization efforts to train a sufficient number of surgeons and to provide them with adequate instruction in the use of our products. This training process may take longer than expected and may therefore affect our ability to generate sales. Convincing surgeons to dedicate the time and energy necessary for adequate training is challenging and we may not be successful in these efforts. If surgeons are not properly trained, they may misuse or ineffectively use our products. This may result in unsatisfactory patient outcomes, patient injury, negative publicity, or lawsuits against us, any of which could have an adverse effect on our business.

The FDA and other regulatory agencies actively enforce regulations prohibiting promotion of products for unapproved or off-label uses. Our promotional materials and training methods regarding surgeons must comply with FDA and other applicable laws and regulations regarding promotion for unapproved or off-label uses. If the FDA determines that our training constitutes promotion for unapproved or off-label uses, they could request that we modify our training or subject us to regulatory enforcement actions, including the issuance of a warning letter, injunction, seizure, civil fine and criminal penalty.

We depend on a single or a limited number of third-party suppliers, and the loss of these third-party suppliers or their inability to supply us with adequate raw materials could adversely affect our business.

We rely on a limited number of third-party suppliers for the raw materials required for the production of our implant products. Furthermore, in some cases we rely on a single supplier. Our dependence on a limited number of third-party suppliers or on a single supplier, and the challenges we may face in obtaining adequate supplies of raw materials, involve several risks, including limited control over pricing, availability, quality, and delivery schedules. We cannot be certain that our current suppliers will continue to provide us with the quantities of these raw materials that we require or satisfy our anticipated specifications and quality requirements. Any supply interruption in limited or sole sourced raw materials could materially harm our ability to manufacture our products until a new source of supply, if any, could be identified and qualified. Although we believe there are other suppliers of these raw materials, we may be unable to find a sufficient alternative supply channel in a reasonable time or on commercially reasonable terms. Any performance failure on the part of our suppliers could delay the development and commercialization of our implant products, including limiting supplies necessary for clinical trials and regulatory approvals, or interrupt production of then existing products that are already marketed, which would have a material adverse effect on our business.

We also use collagen, a protein obtained from animal source tissue, as another significant material required to produce our products. We may not be able to obtain adequate supplies of animal source tissue, or to obtain this tissue from animal herds that we believe do not involve pathogen contamination risks, to meet our future needs or on a cost-effective basis. Any significant supply interruption could adversely affect the production of our products and delay our product development or clinical trial programs. These delays would have an adverse effect on our business.

We will need to increase the size of our organization, and we may be unable to manage rapid growth effectively.

Our failure to manage growth effectively could have a material and adverse effect on out business, results of operations and financial condition. We anticipate that a period of significant expansion will be required to address possible other acquisitions of business, products, or rights, and potential internal growth to handle licensing and research activities. This expansion will place a significant strain on management, operational and financial resources. To manage the expected growth of our operations and personnel, we must both improve our existing operational and financial systems, procedures and controls and implement new systems, procedures and controls. We must also expand our finance, administrative, and operations staff. Our current personnel, systems, procedures and controls may not adequately support our future operations. Management may be unable to hire, train, retain, motivate and manage necessary personnel or to identify, manage and exploit existing and potential strategic relationships and market opportunities.

Risks Related to Regulatory Approval of Our Products and Other Government Regulations

Government regulation of our business is extensive and obtaining and maintaining the necessary regulatory approvals is uncertain, expensive and time-consuming.

The process of obtaining regulatory clearances or approvals to market a medical device from the FDA, or similar regulatory authorities outside of the United States is costly and time consuming, and there can be no assurance that such clearances or approvals will be granted on a timely basis, or at all. The FDA’s 510(k) clearance process generally takes 4 to 12 months from submission, depending on whether a Special or traditional 510(k) premarket notification has been submitted, but can take significantly longer. An application for premarket approval, or PMA, must be submitted to the FDA if the device cannot be cleared through the 510(k) clearance process and is not exempt from premarket review by the FDA. The PMA process almost always requires one or more clinical trials and can take one to three years from the date of filing, or longer. In some cases, the FDA has indicated that it will require clinical data as part of the 510(k) process.

There is no certainty that any of our products will be cleared by the FDA by means of either a 510(k) notice or a PMA application. Even if the FDA permits us to use the 510(k) clearance process, we cannot assure you that the FDA will not require either supporting data from laboratory tests or studies that we have not conducted, or substantial supporting clinical data. If we are unable to use the 510(k) clearance process for any of our products, are required to provide clinical data or laboratory data that we do not possess to support our 510(k) premarket notifications for any of these products, or otherwise experience delays in obtaining or fail to obtain regulatory clearances, the commercialization of such product will be delayed or prevented, which will adversely affect our ability to generate revenues. It also may result in the loss of potential competitive advantages that we might otherwise attain by bringing our products to market earlier than our competitors. Any of these contingencies could adversely affect our business.

Even if regulatory clearance is obtained, a marketed product is subject to continual review, and later discovery of previously unidentified problems or failure to comply with the applicable regulatory requirements may result in restrictions on a product’s marketing or withdrawal of the product from the market as well as possible civil or criminal sanctions.

We expect to be required to conduct clinical trials for some of our products. We have no experience conducting clinical trials, they may proceed more slowly than anticipated, and we cannot be certain that our products will be shown to be safe and effective for human use.

In order to commercialize some of our products, we may be required to submit a PMA, which will require us to conduct clinical trials. Even if we seek FDA clearance of one our products through the 510(k) process, the FDA may require us to conduct a clinical trial in support of our 510(k). We will receive approval from the FDA to commercialize products requiring a clinical trial only if we can demonstrate to the satisfaction of the FDA, in well-designed and properly conducted clinical trials, that our product candidates are safe and effective and otherwise meet the appropriate standards required for approval for specified indications. Clinical trials are complex, expensive, time consuming, uncertain and subject to substantial and unanticipated delays. Before we may begin clinical trials that present a significant risk to subjects, we must submit and obtain FDA approval of an investigational device exemption, or IDE, that describes, among other things, the manufacture of, and controls for, the device and a complete investigational plan. Clinical trials may involve a substantial number of patients in a multi-year study. We may encounter problems with our clinical trials and any of those problems could cause us or the FDA to suspend those trials, or delay the analysis of the data derived from them.

A number of events or factors, including any of the following, could delay or prevent the completion of our clinical trials in the future and negatively impact or even foreclose our ability to obtain FDA approval for, and to introduce a particular product:

•

failure to obtain approval from the FDA or any foreign regulatory authority to commence an investigational study;

•

conditions imposed on us by the FDA or any foreign regulatory authority regarding the scope or design of our clinical trials;

•

delays in obtaining or in our maintaining required approvals from institutional review boards or other reviewing entities at clinical sites selected for participation in our clinical trials;

•

insufficient supply of our products or other materials necessary to conduct our clinical trials;

•

difficulties in enrolling patients in our clinical trials;

•

negative or inconclusive results from clinical trials, or results that are inconsistent with earlier results, that necessitate additional clinical studies;

•

serious or unexpected side effects experienced by patients in whom our products are implanted; or

•

failure by any of our third-party contractors or investigators to comply with regulatory requirements or meet other contractual obligations in a timely manner.

Our clinical trials may not begin as planned, may need to be redesigned, and may not be completed on schedule, if at all. Delays in our clinical trials may result in increased development costs for our product candidates, which could cause our stock price to decline and limit our ability to obtain additional financing. In addition, if one or more of our clinical trials are delayed, competitors may be able to bring products to market before we do, and the commercial viability of our product candidates could be significantly reduced.

We have not yet conducted any clinical trials with our products, and any adverse results in our clinical trials could have a material adverse effect on our business.

There may be unexpected findings, particularly those that may only become evident from larger scale clinical trials, as compared with the smaller scale tests we intend to do initially. The occurrence of unexpected findings in connection with our clinical trials or any subsequent clinical trial required by our regulators may prevent or delay obtaining regulatory approval, and may adversely affect coverage or reimbursement determinations. Our regulators may also determine that additional clinical trials are necessary, in which case approval may be delayed for several months or even years while these trials are conducted. The clinical trials may not show that our products based on NDGA, PVA-based hydrogel, or any other products we develop are safe and effective. If we are unable to complete the clinical trials necessary to successfully support our regulatory applications, our ability to commercialize our products, business, financial condition, and results of operations would be materially adversely affected.

Our products contain biologic materials, and so may face additional obstacles to FDA clearance or approval.

To complete successful clinical trials, a product must meet the criteria for clinical approval, or endpoints, established in the clinical study. These endpoints are established in consultation with the FDA, following any applicable clinical trial design guidelines, to establish the safety and effectiveness for approval of devices subject to PMA approval, or to demonstrate the substantial equivalence of devices subject to 510(k) clearance. However, in the case of products which are novel or which target parts of the human body for which there are no FDA approved products, the scientific literature may not be as complete and there may not be established guidelines for the design of studies to demonstrate the effectiveness of such products. As a result, clinical trials considering such products may take longer than average and obtaining approval may be more difficult. Additionally, the endpoints established for such a clinical trial might be inadequate to demonstrate the safety and efficacy or substantial equivalence required for regulatory clearance because they do not adequately measure the clinical benefit of the product being tested. In certain cases additional data collected in the clinical trial or further clinical trials may be required by the FDA. Any delays in regulatory approval will delay commercialization of our products, which may have an adverse effect on our business.

The FDA regulates human therapeutic products in one of three broad categories: drugs, biologics or medical devices. The FDA’s scrutiny of products containing biologic materials may be heightened. Although we anticipate that our products will be regulated in the U.S. as medical devices, we will use biological materials in the production of several devices. FDA may conclude that some of our products are combinations of devices and biologicals, or may conclude that some of our products are biologics rather than devices, potentially requiring a different and more time consuming premarket clearance mechanism. Use of this biological material in our products may result in heightened scrutiny of such product which may result in further delays in, or obstacles to, obtaining FDA clearance or approval.

Subsequent modifications to our products may require new regulatory approvals, or may require us to cease marketing or recall the modified products until approvals are obtained.

Once our products receive FDA approval or clearance, subsequent modification to our products may require new regulatory approvals or clearances, including 510(k) clearances or premarket approvals, or require us to recall or cease marketing the modified devices until these clearances or approvals are obtained. The FDA requires device manufacturers to initially make and document a determination of whether or not a modification requires a new approval, supplement or clearance. A manufacturer may determine that a modification does not require a new clearance or approval. However, the FDA can review a manufacturer’s decision and may disagree. The FDA may also on its own initiative determine that a new clearance or approval is required. We may make modifications that we believe do not or will not require additional clearances or approvals. If the FDA disagrees and requires new clearances or approvals for the modifications, we may be required to recall and to stop marketing our products as modified, which could require us to redesign our products and harm our operating results. In these circumstances, we may be subject to significant enforcement actions.

If a manufacturer determines that a modification to a FDA-cleared device requires premarket clearance, then the manufacturer must file for a new 510(k) clearance or possibly a premarket approval application supplement. Where we determine that modifications to our products require a new 510(k) clearance or premarket approval application, we may not be able to obtain those additional clearances or approvals for the modifications or additional indications in a timely manner, or at all. Obtaining clearances and approvals can be a time consuming process, and delays in obtaining required future clearances or approvals would adversely affect our ability to introduce new or enhanced products in a timely manner, which in turn would harm our future growth.

If we or our suppliers fail to comply with the FDA’s quality system regulations, the manufacture of our products could be delayed.

We and our suppliers are required to comply with the FDA’s quality system regulations, which cover the methods and documentation of the design, testing, production, control, quality assurance, labeling, packaging, storage and shipping of our products. The FDA enforces the quality system regulation through inspections. If we or our supplier fail a quality system regulations inspection or if any corrective action plan is not sufficient, FDA could take enforcement action, including any of the following sanctions and the manufacture of our products could be delayed or terminated:

•

untitled letters, warning letters, fines, injunctions, consent decrees and civil penalties;

•

customer notifications for repair, replacement, refunds;

•

recall, detention or seizure of our products;

•

operating restrictions or partial suspension or total shutdown of production;

•

refusing or delaying our requests for 510(k) clearance or premarket approval of new products or modified products;

•

withdrawing 510(k) clearances on PMA approvals that have already been granted;

•

refusal to grant export approval for our products; or

•

criminal prosecution.

Once our products are commercialized, we and our sales personnel, whether employed by us or by others, must comply with various federal and state anti-kickback, self referral, false claims and similar laws, any breach of which could cause a material adverse effect on our business, financial condition and results of operations.

Once our products are commercialized, our relationships with surgeons, hospitals and the marketers of our products will be subject to scrutiny under various federal anti-kickback, self-referral, false claims and similar laws, often referred to collectively as healthcare fraud and abuse laws. Healthcare fraud and abuse laws are complex, and even minor, inadvertent violations can give rise to claims that the relevant law has been violated. Possible sanctions for violation of these fraud and abuse laws include monetary fines, civil and criminal penalties, exclusion from federal and state healthcare programs, including Medicare, Medicaid, Veterans Administration health programs, workers’ compensation programs and TRICARE (the healthcare system administered by or on behalf of the U.S. Department of Defense for uniformed services beneficiaries, including active duty and their dependents, retirees and their dependents), and forfeiture of amounts collected in violation of such prohibitions. Certain states in which we intend to market our products have similar fraud and abuse laws, imposing substantial penalties for violations. Any government investigation or a finding of a violation of these laws would likely result in a material adverse effect on the market price of our common stock, as well as our business, financial condition and results of operations.

Anti-kickback laws and regulations prohibit any knowing and willful offer, payment, solicitation or receipt of any form of remuneration in return for the referral of an individual or the ordering or recommending of the use of a product or service for which payment may be made by Medicare, Medicaid or other government-sponsored healthcare programs. We have formed Physician Advisory Boards consisting of an aggregate of 35 physicians to assist us with scientific research and development and to help us evaluate technologies. We have also entered into consulting agreements and product development agreements with surgeons, including some who may make referrals to us or order our products after our products are introduced to market. In addition, some of these physicians own our stock, which they purchased in arms’ length transactions on terms identical to those offered to non-surgeons, or received stock options from us as consideration for consulting services performed by them. We also may engage additional physicians on a consulting basis. While these transactions were structured with the intention of complying with all applicable laws, including the federal ban on physician self referrals, commonly known as the “Stark Law,” state anti-referral laws and other applicable anti-kickback laws, it is possible that regulatory or enforcement agencies or courts may in the future view these transactions as prohibited arrangements that must be restructured or for which we would be subject to other significant civil or criminal penalties, or prohibit us from accepting referrals from these surgeons. Because our strategy relies on the involvement of physicians who consult with us on the design of our product candidates, we could be materially impacted if regulatory or enforcement agencies or courts interpret our financial relationships with our physician advisors who refer or order our products to be in violation of applicable laws and determine that we would be unable to achieve compliance with such applicable laws. This could harm our reputation and the reputations of our physician advisors. In addition, the cost of noncompliance with these laws could be substantial since we could be subject to monetary fines and civil or criminal penalties, and we could also be excluded from federally funded healthcare programs, including Medicare and Medicaid, for non-compliance.

The scope and enforcement of all of these laws is uncertain and subject to rapid change, especially in light of the lack of applicable precedent and regulations. There can be no assurance that federal or state regulatory or enforcement authorities will not investigate or challenge our current or future activities under these laws. Any investigation or challenge could have a material adverse effect on our business, financial condition and results of operations. Any state or federal regulatory or enforcement review of us, regardless of the outcome, would be costly and time consuming. Additionally, we cannot predict the impact of any changes in these laws, whether these changes are retroactive or will have effect on a going-forward basis only.

We face significant uncertainty in the industry due to government healthcare reform.

Political, economic and regulatory influences are subjecting the healthcare industry to fundamental changes. Reforms under consideration in the United States include mandated basic healthcare benefits, controls on healthcare spending, increases in insurance premiums and increased out-of-pocket requirements for patients, the creation of large group purchasing organizations that aim to reduce the costs of products that their member hospitals consume, and significant modifications to the healthcare delivery system. We anticipate that the U.S. Congress and state legislatures will continue to review and assess alternative healthcare delivery systems and payment methods. Due to uncertainties regarding the ultimate features of reform initiatives and the timing of their enactment and implementation, we cannot predict which, if any, of such reform proposals will be adopted, when they may be adopted or what impact reform initiatives may have on us.

Risks Related to the Securities Markets and Ownership of Our Common Stock

The concentrated common stock ownership by certain of our executive officers and directors will limit your ability to influence corporate matters.

As of June 9, 2009, our directors and executive officers together beneficially owned approximately 22% of our outstanding capital stock. This group has significant influence over our management and affairs and overall matters requiring shareholder approval, including the election of directors and significant corporate transactions, such as a merger or sale of our company or our assets, for the foreseeable future. This concentrated control will limit the ability of other shareholders to influence corporate matters and, as a result, we may take actions that some of its shareholders do not view as beneficial. In addition, such concentrated control could discourage others from initiating changes of control. As a result, the market price of our shares could be adversely affected.

Our Common Stock is and likely will remain subject to the SEC’s “Penny Stock” rules, which may make its shares more difficult to sell.

Because the price of our Common Stock is currently and may remain less than $5.00 per share, it is expected to be classified as a “penny stock.” The SEC rules regarding penny stocks may have the effect of reducing trading activity in our shares, making it more difficult for investors to sell. Under these rules, broker-dealers who recommend such securities to persons other than institutional accredited investors must:

•

make a special written suitability determination for the purchaser;

•

receive the purchaser’s written agreement to a transaction prior to sale;

•

provide the purchaser with risk disclosure documents which identify certain risks associated with investing in “penny stocks” and which describe the market for these “penny stocks” as well as a purchaser’s legal remedies;

•

obtain a signed and dated acknowledgment from the purchaser demonstrating that the purchaser has received the required risk disclosure document before a transaction in a “penny stock” can be completed; and

•

give bid and offer quotations and broker and salesperson compensation information to the customer orally or in writing before or with the confirmation.

These rules make it more difficult for broker-dealers to effectuate customer transactions and trading activity in our securities and may result in a lower trading volume of our common stock and lower trading prices.

Our Common Stock may be thinly traded.

There is a minimal public market for our Common Stock. We cannot be certain more of a public market for our Common Stock will develop, or if developed, that it will be sustained. Our Common Stock will likely be thinly traded compared to larger more widely known companies. We cannot predict the extent to which an active public market for our Common Stock will develop or be sustained at any time in the future. If we are unable to develop or sustain a market for our Common Stock, investors may be unable to sell the Common Stock they own, and may lose the entire value of their investment.

Securities analysts may elect not to report on our Common Stock or may issue negative reports that adversely affect the stock price.

At this time, no securities analysts provide research coverage of our Common Stock, and securities analysts may elect not to provide such coverage in the future. Rules mandated by the Sarbanes-Oxley Act and a global settlement reached in 2003 among the SEC, other regulatory agencies, and a number of investment banks led to a number of fundamental changes in how analysts are reviewed and compensated. In particular, many investment banking firms are required to contract with independent financial analysts for their stock research. It may remain difficult for a company such as ours, with a smaller market capitalization, to attract independent financial analysts that will cover our Common Stock. If securities analysts do not cover our Common Stock, the lack of research coverage may adversely affect its actual and potential market price. The trading market for our Common Stock may be affected in part by the research and reports that industry or financial analysts publish about its business. If one or more analysts elect to cover us and then downgrade the stock, the stock price would likely decline rapidly. If one or more of these analysts cease coverage of us, we could lose visibility in the market, which in turn could cause its stock price to decline. This could have a negative effect on the market price of our shares.

We are now a development-stage company, making it difficult to comply with SEC requirements and to reliably predict future growth and operating results.

Our new management team is now responsible for its operations and reporting. This requires outside assistance from legal, accounting, investor relations, or other professionals that could be more costly than planned. We may also be required to hire additional staff to comply with additional SEC reporting requirements and compliance under the Sarbanes-Oxley Act of 2002. Our failure to comply with reporting requirements and other provisions of securities laws could negatively affect our stock price and adversely affect our results of operations, cash flow and financial condition.

Operating as a public company also requires us to make forward-looking statements about future operating results and to provide some guidance to the public markets. Our management has limited experience as a management team in a public company and as a result projections may not be made timely or set at expected performance levels and could materially affect the price of our shares. Any failure to meet published forward-looking statements that adversely affect the stock price could result in losses to investors, shareholder lawsuits or other litigation, sanctions or restrictions issued by the SEC or the stock market upon which our stock is traded.

We do not intend to pay cash dividends.

We have never declared or paid cash dividends on our capital stock. We currently expect to use available funds and any future earnings in the development, operation and expansion of our business and do not anticipate paying any cash dividends in the foreseeable future. In addition, the terms of any future debt or credit facility we may obtain may preclude us from paying any dividends. As a result, capital appreciation, if any, of our Common Stock will be an investor’s only source of potential gain from our Common Stock for the foreseeable future.

Shareholders may experience significant dilution if future equity offerings are used to fund operations or acquire complementary businesses.

If future operations or acquisitions are financed through the issuance of equity securities, shareholders could experience significant dilution. In addition, securities issued in connection with future financing activities or potential acquisitions may have rights and preferences senior to the rights and preferences of our Common Stock. The issuance of shares of our Common Stock upon the exercise of options may result in dilution to our shareholders.

We may become involved in securities class action litigation that could divert management’s attention and harm its business.

The stock market in general and the stocks of medical device companies in particular have experienced extreme price and volume fluctuations. These fluctuations have often been unrelated or disproportionate to the operating performance of the companies involved. If these fluctuations occur in the future, the market price of our shares could fall regardless of its operating performance. In the past, following periods of volatility in the market price of a particular company’s securities, securities class action litigation has been brought against that company. If the market price or volume of our shares suffers extreme fluctuations, then we may become involved in this type of litigation which would be expensive and divert management’s attention and resources from managing the business.

Anti-takeover provisions in our organizational documents may discourage or prevent a change of control, even if an acquisition would be beneficial to shareholders, which could affect our share price adversely and prevent attempts by shareholders to replace or remove current management.

Our Articles of Incorporation and Bylaws contain provisions that could delay or prevent a change of control of our company or its Board of Directors that shareholders might consider favorable. Some of these provisions include:

•

authorizing the issuance of preferred stock which can be created and issued by the Board of Directors without prior common stock shareholder approval, with rights senior to those of the common stock;

•

restricting persons who may call shareholder meetings; and

•

allowing the Board to fill vacancies and to fix the number of directors.

Item 1B. Unresolved Staff Comments

None

Item 2. Properties

Our corporate headquarters are located in Destin, Florida, where we lease approximately 1,900 square feet of office space. (see “Certain Relationships and Related Transactions” below). Our MiMedx operations are conducted in a leased facility of approximately 5,000 square feet in Tampa, Florida. This facility consists of laboratory (2,000 feet) and manufacturing (3,000 feet) space. Also in Tampa, Florida we lease approximately 2,000 square feet of office space across the street from our laboratory and manufacturing operations. We lease approximately 12,200 square feet of office, laboratory and manufacturing space in Marietta, Georgia which is where we conduct our SpineMedica operations. Lastly, we lease approximately 225 square feet of office space inside the Andrews Institute in Gulf Breeze, Florida, which is used for clinical development and teaching. We believe these facilities are adequate for our current activities. We do not own any real estate.

Item 3. Legal Proceedings

None

Item 4. Submissions of Matters to a Vote of Security Holders

None

PART II

Item 5.		Market for Registrant’s Common Equity, Related Shareholder Matters and Issuer Purchases of Equity Securities

Our Common Stock was approved for quotation on the OTC Bulletin Board on July 19, 2007. Only a limited number of shares were traded after the approval of the quotation in July 2007. The Common Stock was traded with the trading symbol of “AYXC.”

Our common stock began trading under the symbol “MDXG” on April 2, 2008. The following table sets forth the high and low bid prices on the OTC Bulletin Board for our common stock, based on information provided from OTC Bulletin Board. These quotations reflect inter-dealer prices, without retail mark-up, mark-down, or commission and may not necessarily represent actual transactions.

		High*				Low*
Year Ended March 31, 2009
First Quarter		$	6.35			$	4.05
Second Quarter			5.10				4.50
Third Quarter			4.75				2.60
Fourth Quarter			4.40				0.40
Year Ended March 31, 2008
First Quarter			N/A				N/A
Second Quarter		$	0.96			$	0.96
Third Quarter			0.96				0.96
Fourth Quarter			6.52				0.96

Based upon information supplied from our transfer agent, there were approximately 735 shareholders of record of our Common Stock as of June 9, 2009.

We have not paid any cash dividends on our common stock since our formation and do not intend to do so in the future.

The Company did not repurchase any of its outstanding securities during the years ended March 31, 2009 and 2008.

Item 6. Selected Financial Data

Not applicable.

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

You should read the following discussion and analysis of financial condition and results of operations, together with the financial statements and the related notes appearing at the end of this report. Some of the information contained in this discussion and analysis or set forth elsewhere in this report, including information with respect to our plans and related financing, includes forward-looking statements that involve risks and uncertainties. You should read the “Risk Factors” section of this report for a discussion of important factors that could cause actual results to differ materially from the results described in or implied by the forward-looking statements contained in the following discussion and analysis.

The discussion and analysis of our financial conditions and results of operations are based on the Company’s financial statements, which have been prepared in accordance with U.S. generally accepted accounting principles. The preparation of these financial statements requires making estimates and assumptions that affect the reported amounts of assets and liabilities and the disclosure of contingent assets and liabilities at the date of the financial statements, as well as the reported revenues, if any, and expenses during the reporting periods. On an ongoing basis, we evaluate such estimates and judgments, including those described in greater detail below. We base our estimates on historical experience and on various other factors that we believe are reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.

Overview

The Company is a development-stage company that has two operating subsidiaries: MiMedx and SpineMedica. MiMedx was formed to acquire a license for the use, adaptation and development of certain core technologies developed at the Shriners Hospitals for Children and the University of South Florida. This technology focuses on biomaterials for soft tissue repair, such as tendons, ligaments and cartilage, as well as other biomaterial-based products for numerous other medical applications. In September 2007, MiMedx entered into a consulting agreement with Thomas J. Graham, M.D., a leading hand surgeon, pursuant to which Dr. Graham contributed to, or developed on behalf of, MiMedx certain intellectual property related to implants for use in upper extremities. The business of developing that intellectual property is known as MiMedx’s Level Orthopedics division. In July of 2007, SpineMedica was formed to acquire SpineMedica Corp., which had licensed from SaluMedica, LLC the rights to use a PVA-based hydrogel in spinal applications. MiMedx also has a license from SaluMedica, LLC to use a PVA-based hydrogel in the surgical repair of the rotator cuff and hand (excluding the wrist) and to make surgical sheets. In April 2009, SpineMedica received clearance from the FDA to market our Paradís Vaso Shield™ device, indicated for use as a cover for vessels following anterior vertebral surgery. The proprietary, patented, and biocompatible polyvinyl alcohol polymer (PVA) membrane may reduce the risk of associated injury following anterior vertebral surgeries by providing a vessel cover.

The Company has generated no operating revenue and has a history of losses since its inception in November 2006. The Company incurred a net loss of approximately $11,919,000 in the fiscal year ended March 31, 2009, or approximately $(0.32) per share. Since its inception in November 2006, the Company has incurred a net loss of approximately $29,942,000.

From inception through March 31, 2009, we funded our start-up costs, operating costs and capital expenditures through issuances of stock. We are currently attempting to raise additional funds through our Notes offering and private placements of our common stock to accredited investors but there can be no assurances that funds will be available, or that the price or terms we can obtain will be acceptable. Management has taken steps to address the current liquidity crisis, including the deferral of payments related to our accrued legal and professional fees, the deferral of salaries for certain executives of MiMedx Group, Inc., the deferral of directors fees, and adjusting our critical spend schedule. We currently have no material commitments for capital expenditures.

Over the next twelve months, assuming we are able to address our need for capital, our plan of operation is to further develop and market our core product platforms: NDGA-polymerized collagen for the treatment and repair of soft tissues related to tendons and ligaments and PVA-based implants for the spine and other applications. This effort will include initiating management of our quality system, executing our process for obtaining FDA clearance and other required regulatory approvals, engineering, prototype development, and pre-clinical testing. With respect to NDGA-polymerized collagen, over the course of the next year, the Company intends to perform required biocompatibility and other testing that may be used in future FDA applications as well as continue to conduct testing after further refinement of our tendon and ligament prototypes through collaboration with our Physician Advisory Board. We will continue to explore the best avenues for exploiting our Level Orthopedics assets. With respect to PVA-based implants for spine and other applications, over the course of the next year we will conduct biocompatibility, and other testing on device prototypes focused on treatments for spine disorders and other applications. Furthermore, we may develop PVA-based implants for use in the hand and as a general patch, used in the surgical repair of the spine.

We expect to invest in infrastructure development with respect to manufacturing scale-up and quality system implementation. This will enable us to increase our capacity to manufacture our NDGA-polymerized fibers in quantities and lengths sufficient for large-scale weaving and braiding and other manufacturing systems. We plan to implement infrastructure in multiple stages as development progresses. SpineMedica initially plans to manufacture the Paradís Vaso Shield™ product at their Marietta, GA location and believes it has sufficient capacity to meet projected needs.

We also intend to analyze acquisition and partnership opportunities as they arise. Our focus will likely be in the orthopedics, spine, general surgery, trauma and regenerative segments.

To implement our business plan and generate revenue from other sources, we must develop products and obtain regulatory clearances or approvals for those products in many jurisdictions. Other than the clearance for the Paradís Vaso Shield™, we may not receive any such regulatory clearances or approvals. Due to this and a variety of other factors, many of which are discussed in this report under “Risk Factors,” we may be unable to generate significant revenues or margins, control operating expenses, or achieve or sustain profitability in future years.

Critical Accounting Policies

We believe that of our significant accounting policies, which are described in Note 2 to our financial statements appearing elsewhere in this report, the following accounting policies involve a greater degree of judgment and complexity. Accordingly, these are the policies we believe are the most critical to aid in fully understanding and evaluating our consolidated financial condition and results of operations.

Goodwill and intangible assets:

Intangible assets include licensing rights and are accounted for based on Financial Accounting Standard Statement No. 142 Goodwill and Other Intangible Assets (“FAS 142”). In that regard, goodwill is not amortized but is tested at least annually for impairment, or more frequently if events or changes in circumstances indicate that the asset might be impaired. Intangible assets with finite useful lives are amortized using the straight-line method over a period of ten years, the remaining term of the patents underlying the licensing rights (considered to be the remaining useful life of the license).

Impairment of long-lived assets:

We evaluate the recoverability of our long-lived assets (finite lived intangible asset and property and equipment) whenever adverse events or changes in business climate indicate that the expected undiscounted future cash flows from the related assets may be less than previously anticipated. If the net book value of the related assets exceeds the expected undiscounted future cash flows of the assets, the carrying amount will be reduced to the present value of their expected future cash flows and an impairment loss would be recognized.

Acquired in-process research and development:

In connection with the acquisition of SpineMedica, during the year ended March 31, 2008, we determined that approximately $7.2 million of the fair value of the acquisition price qualifies as in-process research and development, and as such, this amount was expensed as research and development expense on the acquisition date.

Share-based compensation:

We follow the provisions of Statement of Financial Accounting Standards No. 123R — Share-based Payments (“FAS123R”) which requires the use of the fair-value based method to determine compensation for all arrangements under which employees and others receive shares of stock or equity instruments (options and warrants).

Research and development costs:

Research and development costs consist of direct and indirect costs associated with the development of our technologies. These costs are expensed as incurred.

Fair value determination of privately-held securities:

The fair values of the common stock as well as the common stock underlying options and warrants granted as part of asset purchase prices or as compensation prior to the February 8, 2008 Alynx merger were estimated by management with input from an independent valuation specialist.

Determining the fair value of stock requires making complex and subjective judgments. We used the market approach to estimate the value of the enterprise at each date on which securities were issued or granted. The enterprise value was then allocated to preferred and common shares taking into account the enterprise value available to all shareholders and allocating that value among the various classes of stock based on the rights, privileges and preferences of the respective classes. There is inherent uncertainty in these estimates.

Recent Accounting Pronouncements

In April 2008, FASB Staff Position No. 142-3, Determination of the Useful Life of Intangible Assets (“FSP 142-3”) was issued. This standard amends the factors that should be considered in developing renewal or extension assumptions used to determine the useful life of a recognized intangible asset under FASB Statement 142, Goodwill and Other Intangible Assets. FSP 142-3 is effective for financial statements issued for fiscal years beginning after December 15, 2008, and interim periods within those fiscal years. The Company does not believe adoption will have a material impact on its financial statements.

In June 2008, the Emerging Issues Task Force issued EITF Consensus No. 07-05 Determining Whether an Instrument (or Embedded Feature) Is Indexed to an Entity’s Own Stock for periods beginning after December 15, 2008. The objective of this Consensus is to provide guidance for determining whether an equity-linked financial instrument (or embedded feature) is indexed to an entity’s own stock and it applies to any freestanding financial instrument or embedded feature that has all the characteristics of a derivative in Statement of Financial Accounting Standards No. 133 (“SFAS 133”) Accounting for Derivative Financial Instruments and Hedging Activities, for purposes of determining whether the financial instrument or embedded feature qualifies for the first part of the scope exception in paragraph 11(a) of SFAS 133. This Issue also applies to any freestanding financial instrument that is potentially settled in an entity’s own stock, regardless of whether the instrument has all the characteristics of a derivative in SFAS 133, for purposes of determining whether the instrument is within the scope of Issue 00-19 Accounting for Derivative Financial Instruments Indexed to, and Potentially Settled in, a Company’s Own Stock. The Consensus requires the application of a two-step approach that requires us to (1) evaluate the instrument’s contingent exercise provisions and (2) evaluate the instrument’s settlement provisions. Based on applying this approach to the Company’s outstanding financial instruments, the Company has determined that adoption will have no impact on its financial statements.

Results of Operations for the year ended March 31, 2009 compared to the year ended March 31, 2008

Research and Development Expenses

Research and development expenses increased approximately $2,010,000, nearly doubling from the prior year expense, to approximately $4,023,000 for the year ended March 31, 2009, as compared to approximately $2,013,000 for the year ended March 31, 2008, reflecting our focus on further developing our PVA hydrogel and cross-linked collagen products. These costs consist primarily of internal personnel costs, fees paid to external consultants, and supplies and instruments used in our laboratories. As of March 31, 2009, we employed 25 employees devoted to research and development, validation of our manufacturing processes, and the manufacturing of prototype devices. As of March 31, 2008, we had 17 employees devoted to these efforts. We also increased our use of external consultants and their services to assist us with testing and validation of our products. We anticipate our spending in the area of research and development in the foreseeable future to continue at comparable levels as we progress our technologies thru additional testing and validation in order to obtain clearance or approval from the FDA to market our technologies.

Acquired In-Process Research and Development

For the year ended March 31, 2009, we did not acquire any in-process research and development costs, compared to the $7,177,000 recognized in conjunction with our acquisition of SpineMedica during the year ended March 31, 2008. As part of our acquisition of SpineMedica, a total of approximately $7,177,000 was allocated from the purchase price to acquired in-process research and development. The allocation of the purchase costs relates to two products that were still under development and had not yet yielded a completed finished product. This amount was recognized as an expense in the year ended March 31, 2008.

General and Administrative Expenses

General and administrative expenses for the year ended March 31, 2009, decreased approximately $703,000 or 8.1%, to approximately $7,956,000 compared to approximately $8,659,000 for the year ended March 31, 2008. General and administrative expenses consist of personnel costs, professional fees consisting of legal and accounting fees, travel and entertainment, occupancy costs and administrative expenses. During the year ended March 31, 2009, personnel costs increased approximately $775,000 or 25%, to $3,923,000 compared to approximately $3,148,000 for the year ended March 31, 2008. Personnel costs include stock based compensation which increased approximately $611,000 from the year ended March 31, 2008, accounting for most of the increase in personnel costs. As of March 31, 2009, we employed 9 personnel not related to research and development functions as compared to 15 as of March 31, 2008. Professional fees during the year ended March 31, 2009, decreased approximately $2,295,000 or 59%, to $1,600,000 during the year ended March 31, 2009, as compared to approximately $3,895,000 of fees incurred during the year ended March 31, 2008. The decrease in professional fees is primarily attributed to approximately $1,870,000 of professional fees related to merger costs, of which $1,126,000 represented the fair value of common shares issued to certain persons as compensation for finders’ services related to the transaction. Occupancy costs consist primarily of leasing office and lab space in Tampa, Florida, and in Marietta, Georgia. The first lease we entered into was in April 2007. Prior to that, during the fiscal year ended March 31, 2007, we operated out of the offices of our founder, for no consideration.

During the year ended March 31, 2009, we recorded approximately $425,000 in depreciation expense and approximately $667,000 in amortization expense as compared to amounts approximating $191,000 and $309,000, respectively, for the year ended March 31, 2008. We depreciate our assets on a straight-line basis, principally over five to seven years and amortize our intangible assets over a period of ten years, which we believe represents the remaining useful lives of the patents underlying the licensing rights and intellectual property. We do not amortize goodwill but at least annually we test goodwill for impairment and periodically evaluate other intangibles for impairment based on events or changes in circumstances as they occur.

Net Interest Income

We recorded net interest income of approximately $60,000 during the year ended March 31, 2009, compared to approximately $520,000 during the year ended March 31, 2008.

Share-Based Compensation

We follow the provisions of Statement of Financial Accounting Standards No. 123R — Share-based Payments (“FAS123R”) which requires the use of the fair-value based method to determine compensation for all arrangements under which employees and others receive shares of stock or equity instruments (options and warrants). The total share based compensation recognized during the year ended March 31, 2009, approximated $1,419,000 as compared to $808,000 recognized during the year ended March 31, 2008.

Contractual Commitments

The table below sets forth our known contractual obligations as of March 31, 2009:

		Payments due by period
						Less than								4 – 5
Contractual Obligations		Total				1 year				2 – 3 years				years				After 5 years
Consulting Agreements		$	367,000			$	305,000			$	62,000			$	—			$	—
Employment Agreements			1,338,000				888,000				450,000				—				—
Operating Lease Obligations			810,000				279,000				475,000				56,000				—
Total		$	2,515,000			$	1,472,000			$	987,000			$	56,000			$	—

Off-Balance Sheet Arrangements

We have no off-balance sheet arrangements.

Liquidity and Capital Resources

From inception through March 31, 2009, we funded our start-up costs, operating costs and capital expenditures through issuances of stock.

We had approximately $35,000 of cash and cash equivalents on hand as of March 31, 2009. In April 2009, the Company commenced a private placement to sell 3% Convertible Senior Secured Promissory Notes (the “Notes”) to accredited investors. Thru June 10, 2009, the Company has received aggregate proceeds of $3,322,000 under this arrangement and estimates, assuming it receives no additional funds, that it has sufficient funds to operate for the next ninety days or through mid September 2009. In order to fund on-going operating cash requirements beyond that point or to further accelerate and execute its business plan, the Company will need to raise significant additional funds. In view of these matters, the ability of the Company to continue as a going concern is dependent upon the Company’s ability to secure additional financing sufficient to support its research and development activities, approval of developed products for sale by regulatory authorities, including the FDA, and ultimately to generate revenues sufficient to cover all costs. We are currently attempting to raise additional funds through our Notes offering and anticipate future private placements of our common stock to accredited investors but there can be no assurances that funds will be available, or that the price or terms we can obtain will be acceptable. Management has taken steps to address the current liquidity crisis, including the deferral of payments related to our accrued legal and professional fees, the deferral of salaries for certain executives of MiMedx Group, Inc., the deferral of directors fees, and adjusting our critical spend schedule. We currently have no material commitments for capital expenditures. Since inception, the Company has financed its activities principally from the sale of equity securities. While the Company has been successful in the past in obtaining the necessary capital to support its operations, there is no assurance that the Company will be able to obtain additional equity capital or other financing under commercially reasonable terms and conditions, or at all. Furthermore, if the Company issues equity or debt securities to raise additional funds, existing shareholders may experience dilution and the new equity or debt securities it issues may have rights, preferences and privileges senior to those of existing shareholders. In addition, if the Company raises additional funds through collaboration, licensing or other similar arrangements, it may be necessary to relinquish valuable rights to products or proprietary technologies, or grant licenses on terms that are not favorable. If the Company cannot raise funds on acceptable terms, the Company will not be able to continue as a going concern, develop or enhance products, obtain the required regulatory clearances or approvals, execute the Company’s business plan, take advantage of future opportunities, or respond to competitive pressure or unanticipated customer requirements. Any of these events would adversely affect the Company’s ability to achieve the Company’s development and commercialization goals, which could have a material adverse effect on the Company’s business, results of operations and financial condition. The Company’s financial statements do not include any adjustments relating to the recoverability or classification of assets or the amounts of liabilities that might result from the outcome of these uncertainties.

Inflation

We do not believe that the rate of inflation has had a material effect on our operating results. However, inflation could adversely affect our future operating results.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

In the normal course of doing business we are not exposed to the risks associated with foreign currency exchange rates and changes in interest rates. We do not engage in trading market risk sensitive instruments or purchasing hedging instruments or “other than trading” instruments that are likely to expose us to significant market risk, whether interest rate, foreign currency exchange, commodity price or equity price risk.

Our exposure to market risk relates to our cash and investments.

The primary objective of our investment activities is to preserve principal while at the same time maximizing yields without significantly increasing risk. To achieve this objective, we invest our excess cash in debt instruments of the U.S. Government and its agencies, bank obligations, repurchase agreements and high-quality corporate issuers, and, by policy, restrict our exposure to any single corporate issuer by imposing concentration limits. To minimize the exposure due to adverse shifts in interest rates, we maintain investments at an average maturity of generally less than three months.

Item 8. Financial Statements and Supplementary Data

Report of Independent Registered Public Accounting Firm

Board of Directors
MiMedx Group, Inc.

We have audited the accompanying consolidated balance sheets of MiMedx Group, Inc. and subsidiaries as of March 31, 2009 and 2008, and the related consolidated statements of operations, stockholders’ equity and cash flows for the years then ended and the period from inception (November 22, 2006) through March 31, 2009. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with standards of the Public Company Accounting Oversight Board (United States of America). The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purposes of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above, present fairly, in all material respects, the consolidated financial position of MiMedx Group, Inc. and subsidiaries as of March 31, 2009 and 2008 and the consolidated results of their operations and their cash flows for the years then ended and the period from inception (November 22, 2006) through March 31, 2009, in conformity with accounting principles generally accepted in the United States of America.

The accompanying financial statements have been prepared assuming the Company will continue as a going concern. As discussed in Note 3 to the financial statements, the Company has incurred net losses and negative operating cash flows since inception and will require additional financing over a period of years to fund the continued development of products subject to its licensed technologies. The availability of such financing cannot be assured. These conditions raise substantial doubt about the Company’s ability to continue as a going concern. Management’s plans in regard to these matters are described in Note 3. The financial statements do not include any adjustments with respect to the possible future effects on the recoverability and classification of assets or the amounts and classification of liabilities that might result from the outcome of these uncertainties.

		/s/ Cherry, Bekaert & Holland, L.L.P   Cherry, Bekaert & Holland, L.L.P.

Tampa, Florida
June 15, 2009

MIMEDX GROUP, INC. AND SUBSIDIARIES
(A DEVELOPMENT STAGE ENTERPRISE)
CONSOLIDATED BALANCE SHEETS

		March 31,
		2009				2008
ASSETS
Current assets:
Cash and cash equivalents		$	34,828			$	6,749,609
Prepaid expenses and other current assets			82,953				189,253
Total current assets			117,781				6,938,862
Property and equipment, net of accumulated depreciation			1,375,896				1,452,436
Goodwill			857,597				857,597
Intangible assets, net			5,116,337				5,783,153
Deposits			149,202				146,433
Total assets		$	7,616,813			$	15,178,481
LIABILITIES AND STOCKHOLDERS’ EQUITY
Current liabilities:
Accounts payable and accrued expenses		$	1,699,337			$	948,478
Total current liabilities			1,699,337				948,478
Commitments and contingency (Notes 6 and 10)			—				—
Common stock with registration rights, 1,905,000 shares issued and outstanding			3,761,250				—
Stockholders’ equity:
Preferred stock; $.001 par value; 5,000,000 shares authorized and 0 (2009 and 2008) shares issued and outstanding			—				—
Common stock; $.001 par value; 100,000,000 shares authorized and 37,339,628 (2009) and 36,864,534 (2008) shares issued and outstanding			37,340				36,864
Additional paid-in capital			34,230,824				32,226,983
Deficit accumulated during the development stage			(32,111,938	)			(18,033,844	)
Total stockholders’ equity			2,156,226				14,230,003
Total liabilities and stockholders’ equity		$	7,616,813			$	15,178,481

See notes to consolidated financial statements.

MIMEDX GROUP, INC. AND SUBSIDIARIES
(A DEVELOPMENT STAGE ENTERPRISE)
CONSOLIDATED STATEMENTS OF OPERATIONS

										Period from
										Inception
		Year				Year				(November 22, 2006)
		Ended				Ended				through
		March 31, 2009				March 31, 2008				March 31, 2009
Research and development expenses		$	4,022,709			$	2,013,002			$	6,149,608
Acquired in-process research and development (Note 4)			—				7,177,000				7,177,000
General and administrative expenses			7,956,113				8,659,405			$	17,186,144
Loss from operations			(11,978,822	)			(17,849,407	)			(30,512,752	)
Other income (expense):
Interest income			59,551				519,707				613,004
Change in fair value of investment, related party			—				(41,775	)			(41,775	)
Loss before income taxes			(11,919,271	)			(17,371,475	)			(29,941,523	)
Income taxes			—				—				—
Net loss			(11,919,271	)			(17,371,475	)			(29,941,523	)
Accretion of redeemable common stock and common stock with registration rights to fair value			(2,158,823	)			—
Loss attributable to common shareholders		$	(14,078,094	)		$	(17,371,475	)
Net loss per common share
Basic and diluted		$	(0.37	)		$	(0.97	)
Shares used in computing net loss per common share
Basic and diluted			37,735,563				17,909,903

See notes to consolidated financial statements.

MIMEDX GROUP, INC. AND SUBSIDARIES
(A DEVELOPMENT STAGE ENTERPRISE)
CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY
PERIOD FROM INCEPTION (NOVEMBER 22, 2006) THROUGH MARCH 31, 2009

																																														Deficit
		Convertible								Convertible								Convertible																												Accumulated
		Preferred Stock								Preferred Stock								Preferred Stock																Additional				Stock				Note				During the
		Series A								Series B								Series C								Common Stock								Paid-in				Subscriptions				Receivable,				Development
		Shares				Amount				Shares				Amount				Shares				Amount				Shares				Amount				Capital				Receivable				Related party				Stage				Total
Balances, November 22, 2006			—			$	—				—			$	—				—			$	—				—			$	—			$	—			$	—			$	—			$	—			$	—
Issuance of common stock at inception			—				—				—				—				—				—				12,880,000				12,880				—				—				—				(11,592	)			1,288
Employee share-based compensation expense			—				—				—				—				—				—				—				—				13,409				—				—				—				13,409
Other share-based compensation expense			—				—				—				—				—				—				—				—				17,980				—				—				—				17,980
Common stock issued in connection with purchase of license agreement			—				—				—				—				—				—				1,120,000				1,120				894,880				—				—				—				896,000
Issuance of note receivable, related party			—				—				—				—				—				—				—				—				—				—				(2,000,000	)			—				(2,000,000	)
Sale of Series A Preferred stock			11,212,800				14,016,000				—				—				—				—				—				—				(918,806	)			(1,233,750	)			—				—				11,863,444
Accrued interest income			—				—				—				—				—				—				—				—				—				—				(7,644	)			—				(7,644	)
Net loss for the period			—				—				—				—				—				—				—				—				—				—				—				(650,777	)			(650,777	)
Balances, March 31, 2007			11,212,800				14,016,000				—				—				—				—				14,000,000				14,000				7,463				(1,233,750	)			(2,007,644	)			(662,369	)			10,133,700
Employee share-based compensation expense			—				—				—				—				—				—				—				—				649,783				—				—				—				649,783
Other share-based compensation expense			—				—				—				—				—				—				—				—				158,247				—				—				—				158,247
Collection of stock subscription receivable			—				—				—				—				—				—				—				—				—				1,233,750				—				—				1,233,750
Accrued interest income			—				—				—				—				—				—				—				—				—				—				(41,250	)			—				(41,250	)
SpineMedica Corp. acquisition			—				—				5,922,397				7,402,996												2,911,117				2,911				2,316,908				—				2,048,894								11,771,709
Sale of Series C Preferred stock			—				—				—				—				1,285,001				3,855,000				—				—				—				—				—				—				3,855,000
Stock options issued in connection with purchase of intellectual property			—				—				—				—				—				—				—				—				116,000				—				—				—				116,000
Exercise of stock options			—				—				—				—				—				—				1,200				1				2,159				—				—				—				2,160
Alynx Merger — Recapitalization			7,207,398				11,257,996				(5,922,397	)			(7,402,996	)			(1,285,001	)			(3,855,000	)			926,168				926				(926	)			—				—				—				—
Alynx Merger — Transaction Costs (expensed)			—				—				—				—				—				—				205,851				206				1,126,173				—				—				—				1,126,379
Conversion of Preferred stock			(18,420,198	)			(25,273,996	)			—								—								18,420,198				18,420				25,255,576				—				—				—				—
Common stock issued in connection with purchase of license agreement			—				—				—				—				—				—				400,000				400				2,595,600				—				—				—				2,596,000
Net loss for the period			—				—				—				—				—				—				—				—				—				—				—				(17,371,475	)			(17,371,475	)
Balances, March 31, 2008			—				—				—				—				—				—				36,864,534				36,864				32,226,983				—				—				(18,033,844	)			14,230,003
Employee share-based compensation expense			—				—				—				—				—				—				—				—				945,062				—				—				—				945,062
Other share-based compensation expense			—				—				—				—				—				—				—				—				130,076				—				—				—				130,076
Cashless exercise of stock warrants			—				—				—				—				—				—				417,594				418				(418	)			—				—				—
Sale of warrants in connection with private placement of redeemable commoon stock			—				—				—				—				—				—				—				—				595,073				—				—				—				595,073
Exercise of stock options			—				—				—				—				—				—				57,500				58				(52	)			—				—				—				6
Accretion of redeemable common stock and common stock with registration rights to fair value			—				—				—				—				—				—				—				—				—				—				—				(2,158,823	)			(2,158,823	)
Warrants issued in connection with the amendment of private placement of common stock			—				—				—				—				—				—				—				—				334,100				—				—				—				334,100
Net loss for the period			—				—				—				—				—				—				—				—				—				—				—				(11,919,271	)			(11,919,271	)
Balances, March 31, 2009			—			$	—				—			$	—				—			$	—				37,339,628			$	37,340			$	34,230,824			$	—			$	—			$	(32,111,938	)		$	2,156,226

See notes to consolidated financial statements.

MIMEDX GROUP, INC. AND SUBSIDIARIES
(A DEVELOPMENT STAGE ENTERPRISE)
CONSOLIDATED STATEMENTS OF CASH FLOWS

										Period from
										Inception
		Year				Year				(November 22, 2006)
		Ended				Ended				through
		March 31, 2009				March 31, 2008				March 31, 2009
Cash flows from operating activities:
Net loss		$	(11,919,271	)		$	(17,371,475	)		$	(29,941,523	)
Adjustments to reconcile net loss to net cash flows from operating activities, net of effects of acquisition:
Loss on sale of equipment			5,440				—				5,440
Acquired in-process research and development			—				7,177,000				7,177,000
Depreciation			425,013				191,348				617,168
Amortization of intangible assets			666,816				308,914				990,663
Employee share-based compensation expense			945,062				649,783				1,608,254
Other share-based compensation expense			464,176				158,247				640,403
Issuance of common stock for transaction fees			—				1,126,379				1,126,379
Accrued interest on notes receivable, related party			—				(41,250	)			(48,894	)
Change in fair value of investment, related party			—				41,775				41,775
Increase (decrease) in cash resulting from changes in:
Prepaid expenses and other current assets			106,300				(169,244	)			(63,875	)
Accounts payable and accrued expenses			750,859				(164,601	)			801,223
Deferred interest income			—				(43,200	)			(43,200	)
Net cash flows from operating activities			(8,555,605	)			(8,136,324	)			(17,089,187	)
Cash flows from investing activities:
Payments for purchase of equipment			(360,493	)			(1,172,730	)			(1,541,295	)
Proceeds from sale of equipment			6,580				—				6,580
Cash paid for intangible asset			—				—				(100,000	)
Cash paid for security deposits			(2,769	)			6,569				(115,400	)
Cash received in acquisition of SpineMedica Corp.			—				1,957,405				1,957,405
Cash paid for acquisition costs of SpineMedica Corp.			—				(227,901	)			(227,901	)
Payments from (advances to) related party			—				30,125				(2,008,522	)
Net cash flows from investing activities			(356,682	)			593,468				(2,029,133	)
Cash flows from financing activities:
Repayments of related party borrowing			—				(500,000	)			—
Proceeds from Series A preferred stock			—				1,233,750				14,016,000
Proceeds from Series C preferred stock			—				3,855,000				3,855,000
Proceeds from sale of common stock and warrants and common stock with registration rights			2,197,500								2,198,788
Proceeds from exercise of stock options			6				2,160				2,166
Offering costs paid in connection with Series A preferred stock offering			—				(755,152	)			(918,806	)
Net cash flows from financing activities			2,197,506				3,835,758				19,153,148
Net change in cash and cash equivalents			(6,714,781	)			(3,707,098	)			34,828
Cash, beginning of period			6,749,609				10,456,707				—
Cash, end of period		$	34,828			$	6,749,609			$	34,828
SUPPLEMENTAL DISCLOSURE OF CASH FLOW INFORMATION
Cash paid for:
Interest		$	—			$	—			$	—
Income taxes		$	—			$	—			$	—

See notes to consolidated financial statements.

MIMEDX GROUP, INC. AND SUBSIDIARIES
(A DEVELOPMENT STAGE ENTERPRISE)
STATEMENTS OF CASH FLOWS (CONTINUED)

SUPPLEMENTAL SCHEDULE OF NON-CASH INVESTING
AND FINANCING ACTIVITIES

During the year ended March 31, 2008, the Company acquired 100% of the capital stock of SpineMedica Corp. for shares of common and preferred stock (Note 4).

During the year ended March 31, 2008, the Company issued 400,000 shares of common stock valued at $2,596,000, in connection with the purchase of an intangible asset.

During the year ended March 31, 2008, the Company issued stock options to acquire 200,000 shares of common stock valued at $116,000, in connection with the purchase of an intangible asset.

During the year ended March 31, 2008, the Company issued 205,851 shares of common stock valued at $1,126,379, in connection with transaction costs related to the Alynx merger.

During the year ended March 31, 2009, common stock and common stock with registration rights (classified outside of stockholders’ equity) was accreted to fair value by $2,158,823 through a charge to accumulated deficit.

See notes to consolidated financial statements.

MIMEDX GROUP, INC.
(A DEVELOPMENT STAGE ENTERPRISE)
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
YEAR ENDED MARCH 31, 2009 AND 2008 AND THE PERIOD FROM INCEPTION (NOVEMBER 22, 2006)
THROUGH MARCH 31, 2009

1.

Formation and nature of business:

Nature of business:

MiMedx, Inc. (“MiMedx”) was incorporated in Florida in 2006. MiMedx entered into an Agreement and Plan of Merger (“Merger Agreement”) with a publicly-traded Nevada Corporation, Alynx, Co. (“Alynx”), a public shell company, on February 8, 2008. As a result of this transaction, MiMedx shareholders owned approximately 97% of the outstanding shares, thus giving MiMedx substantial control.

Under U.S. generally accepted accounting principles (“GAAP”), MiMedx was deemed to be the accounting acquirer since the shareholders of MiMedx own a substantial majority of the issued and outstanding shares, and thus this reverse merger was accounted for as a capital transaction.

On March 31, 2008, MiMedx Group, Inc., a Florida Corporation, and Alynx merged. As a result of this transaction, MiMedx Group, Inc. became the surviving corporation. The “Company” refers to MiMedx Group, Inc., a development stage company, as well as its two operating subsidiaries: MiMedx and SpineMedica, LLC.

MiMedx acquired a license for the use, adoption and development of certain core technologies developed at the Shriners Hospital for Children and the University of South Florida Research Foundation. This technology focuses on biomaterials for soft tissue repair, such as tendons, ligaments and cartilage, as well as other biomaterial-based products for numerous other medical applications. The development of the licensed technologies requires continued research and development and, ultimately, the approval of the U.S. Food and Drug Administration (“FDA”) and/or foreign regulatory authorities in order for the Company to be able to generate revenues from the sale of its products. This process is expected to take at least one to two years, and there can be no assurance that the Company will be successful in its efforts to commercialize the licensed technology.

On July 23, 2007, MiMedx acquired SpineMedica Corp. through its wholly-owned subsidiary, SpineMedica, LLC (“SpineMedica”) (Note 4). SpineMedica Corp. was incorporated in the State of Florida on June 9, 2005 and its successor SpineMedica, LLC was incorporated in the State of Florida on June 27, 2007. SpineMedica has licensed the right to use Salubria^®, or similar poly-vinyl alcohol (“PVA”) -based biomaterials for certain applications within the body. SpineMedica also owns certain assets (equipment) for the production of products based on a PVA-based hydrogel, which is a water-based biomaterial that can be manufactured with a wide range of mechanical properties, including those that appear to closely mimic the mechanical and physical properties of natural, healthy human tissue. In the United States, the FDA has cleared the material for use as a cover for vessels following anterior vertebral surgery as well as for use next to nerves and in the European Union and Canada it has been cleared for use next to nerves and to replace worn-out and lesioned cartilage in the knee. The Company is exploring numerous applications using the licensed technologies and future developed products may require continued research and development and, ultimately, the clearance or approval of the FDA and/or foreign regulatory authorities in order for the Company to be able to generate revenues from the sale of developed products. This process can take from six months up to five years depending on the type of product and regulatory pathway, and there can be no assurance that SpineMedica will be successful in its efforts to commercialize products using the licensed technology. SpineMedica is also pursuing clearance by foreign regulatory authorities to commercialize its first product outside the United States. This process also depends on the type of product and is expected to take six months for less regulated products and approximately two years for more regulated products.

Future products developed by SpineMedica may fall within less regulated classifications, allowing for earlier commercialization in the United States.

The Company currently operates in one business segment, musculoskeletal products, which will include the design, manufacture and marketing of products for three major market categories: Orthopedic- Sports Medicine, with soft-tissue reconstructive products aimed at repairing tendons and ligaments, Orthopedics-Spine, including products such as our Paradis Vaso Shield^®, which is indicated for use as a cover for vessels following anterior vertebral surgery, and Orthopedic-Extremities, with implants for fracture fixation in the upper extremities (hand, wrist, elbow and shoulder).

The Company is a development stage enterprise and will remain as such until significant revenues are generated, if ever.

2.

Significant accounting policies:

Use of estimates:

The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

Principles of consolidation:

The financial statements include the accounts of MiMedx Group, Inc. and its wholly-owned subsidiaries MiMedx and, SpineMedica. All significant inter-company balances and transactions have been eliminated.

Concentration of credit risk:

Cash and cash equivalents are maintained with major financial institutions in the United States. In October and November, 2008, the Federal Deposit Insurance Corporation (“FDIC”) temporarily increased coverage to $250,000 for substantially all depository accounts and temporarily provides unlimited coverage for certain qualifying and participating non-interest bearing transaction accounts. The increased coverage is scheduled to expire on December 31, 2013, at which time it is anticipated that amount insured by the FDIC will return to $100,000. As of March 31, 2009 the Company had no cash balances which exceeded these insured limits.

Cash and cash equivalents:

Cash and cash equivalents include all highly liquid investments with an original maturity of three months or less.

Goodwill and intangible assets:

Goodwill is not amortized but is tested at least annually for impairment, or more frequently if events or changes in circumstances indicate that the asset might be impaired. Intangible assets with finite useful lives are amortized using the straight-line method over a period of 10 years, the remaining term of the patents underlying the licensing rights and intellectual property (considered to be the remaining useful life of the assets).

Property and equipment:

Property and equipment are recorded at cost and depreciated on a straight-line basis over their estimated useful lives, principally five to seven years. Leasehold improvements are depreciated on a straight-line basis over the lesser of the estimated useful lives or the life of the lease.

Impairment of long-lived assets:

The Company evaluates the recoverability of its long-lived assets (finite lived intangible assets and property and equipment) whenever adverse events or changes in business climate indicate that the expected undiscounted future cash flows from the related assets may be less than previously anticipated. If the net book value of the related assets exceeds the expected undiscounted future cash flows of the assets, the carrying amount would be reduced to the present value of their expected future cash flows and an impairment loss would be recognized. There have been no impairment losses in the periods presented.

Research and development costs:

Research and development costs consist of direct and indirect costs associated with the development of the Company’s technologies. These costs are expensed as incurred.

Acquired in-process research and development:

In connection with the acquisition of SpineMedica, the Company determined that approximately $7.2 million of the fair value of the acquisition price qualified as in-process research and development, and as such, this amount was expensed as research and development expense on the acquisition date (see Note 4).

Income taxes:

Deferred tax assets and liabilities are recognized for the estimated future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective income tax bases. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in the period that included the enactment date. Valuation allowances are recorded for deferred tax assets when the recoverability of such assets is not deemed more likely than not.

Share-based compensation:

The Company follows the provisions of Statement of Financial Accounting Standards No. 123R — Share-based Payments (“SFAS123R”) which requires the use of the fair-value based method to determine compensation for all arrangements under which employees and others receive shares of stock or equity instruments (options and warrants).

Fair value of financial instruments:

The carrying value of accounts payable and accrued expenses approximate their fair value due to the short-term nature of these liabilities.

Fair value determination of privately-held securities:

Prior to February 8, 2008, the fair values of the common stock as well as the common stock underlying options and warrants granted as part of asset purchase prices or as compensation were estimated by management with input from an unrelated valuation specialist. Determining the fair value of stock requires making complex and subjective judgments. The Company used the market approach to estimate the value of the enterprise at each date on which securities were issued or granted. The enterprise value was then allocated to preferred and common shares taking into account the enterprise value available to all stockholders and allocating that value among the various classes of stock based on the rights, privileges and preferences of the respective classes. There is inherent uncertainty in these estimates.

Net loss per share / Reverse stock split

Basic net loss per common share is computed using the weighted-average number of common shares outstanding during the period. Diluted net loss per common share is typically computed using the weighted-average number of common and dilutive common equivalent shares from stock options, warrants and convertible preferred stock using the treasury stock method.

For all periods presented, diluted net loss per share is the same as basic net loss per share, as the inclusion of equivalent shares from outstanding common stock options, warrants and convertible preferred stock would be anti-dilutive. All share and per share amounts for all periods presented have been adjusted to give effect to the reverse stock split discussed in Note 8.

The following table sets forth the computation of basic and diluted net loss per share for the years ended March 31, 2009 and 2008:

		2009				2008
Net loss		$	(11,919,271	)		$	(17,371,475	)
Accretion of redeemable common stock and common stock with registration rights to fair value			(2,158,823	)			—
Loss attributable to common shareholders		$	(14,078,094	)		$	(17,371,475	)
Denominator for basic earnings per share-weighted average shares			37,735,563				17,909,903
Effect of dilutive securities: Stock options and warrants outstanding (a)			—				—
Denominator for diluted earnings per share—weighted average shares adjusted for dilutive securities			37,735,563				17,909,903
Loss per common share attributable to common shareholders—basic and diluted		$	(0.37	)		$	(0.97	)

		2009				2008
Stock options			4,301,250				4,446,250
Warrants			1,160,251				709,331

Recently issued accounting pronouncements:

In April 2008, FASB Staff Position No. 142-3, Determination of the Useful Life of Intangible Assets (“FSP 142-3”) was issued. This standard amends the factors that should be considered in developing renewal or extension assumptions used to determine the useful life of a recognized intangible asset under FASB Statement 142, Goodwill and Other Intangible Assets. FSP 142-3 is effective for financial statements issued for fiscal years beginning after December 15, 2008, and interim periods within those fiscal years. The Company does not believe adoption will have a material impact on its financial statements.

In June 2008, the Emerging Issues Task Force issued EITF Consensus No. 07-05 Determining Whether an Instrument (or Embedded Feature) Is Indexed to an Entity’s Own Stock for periods beginning after December 15, 2008. The objective of this Consensus is to provide guidance for determining whether an equity-linked financial instrument (or embedded feature) is indexed to an entity’s own stock and it applies to any freestanding financial instrument or embedded feature that has all the characteristics of a derivative in Statement of Financial Accounting Standards No. 133 (“SFAS 133”) Accounting for Derivative Financial Instruments and Hedging Activities, for purposes of determining whether the financial instrument or embedded feature qualifies for the first part of the scope exception in paragraph 11(a) of SFAS 133. This Issue also applies to any freestanding financial instrument that is potentially settled in an entity’s own stock, regardless of whether the instrument has all the characteristics of a derivative in SFAS 133, for purposes of determining whether the instrument is within the scope of Issue 00-19 Accounting for Derivative Financial Instruments Indexed to, and Potentially Settled in, a Company’s Own Stock. The Consensus requires the application of a two-step approach that requires us to (1) evaluate the instrument’s contingent exercise provisions and (2) evaluate the instrument’s settlement provisions. Based on applying this approach to the Company’s outstanding financial instruments, the Company has determined that adoption will have no impact on its financial statements.

3.

Liquidity and management’s plans:

The accompanying financial statements have been prepared assuming the Company will continue as a going concern. For the period from inception (November 22, 2006) through March 31, 2009 the Company experienced net losses of $29,941,523 and cash used in operations of $17,089,187. As of March 31, 2009, the Company has not emerged from the development stage and had approximately $35,000 of cash and cash equivalents. In April 2009, the Company commenced a private placement to sell 3% Convertible Senior Secured Promissory Notes (the “Notes”) to accredited investors (see note 12 for further information). Thru June 10, 2009, the Company has received aggregate proceeds of $3,322,000 under this arrangement and, assuming it receives no additional funds, estimates that it has sufficient funds to operate for the next ninety days, or through mid-September 2009. In order to fund on-going operating cash requirements beyond that point or to further accelerate and execute its business plan, the Company will need to raise significant additional funds. In view of these matters, the ability of the Company to continue as a going concern is dependent upon the Company’s ability to secure additional financing sufficient to support its research and development activities, approval of developed products for sale by regulatory authorities, including the FDA, and ultimately to generate revenues sufficient to cover all costs. Since inception, the Company has financed its activities principally from the sale of equity securities. While the Company has been successful in the past in obtaining the necessary capital to support its operations, there is no assurance that the Company will be able to obtain additional equity capital or other financing under commercially reasonable terms and conditions, or at all. Furthermore, if the Company issues equity or debt securities to raise additional funds, existing shareholders may experience dilution and the new equity or debt securities it issues may have rights, preferences and privileges senior to those of existing shareholders. In addition, if the Company raises additional funds through collaboration, licensing or other similar arrangements, it may be necessary to relinquish valuable rights to products or proprietary technologies, or grant licenses on terms that are not favorable. If the Company cannot raise funds on acceptable terms, the Company will not be able to continue as a going concern, develop or enhance products, obtain the required regulatory clearances or approvals, execute the Company’s business plan, take advantage of future opportunities, or respond to competitive pressure or unanticipated customer requirements. Any of these events would adversely affect the Company’s ability to achieve the Company’s development and commercialization goals, which could have a material adverse effect on the Company’s business, results of operations and financial condition. The Company’s financial statements do not include any adjustments relating to the recoverability or classification of assets or the amounts of liabilities that might result from the outcome of these uncertainties.

4.

SpineMedica Corp. acquisition:

On July 23, 2007, MiMedx purchased 100% of the capital stock of SpineMedica Corp. through a newly formed subsidiary, SpineMedica, LLC. SpineMedica’s results of operations and cash flows are included in the accompanying March 31, 2008 financial statements from July 23, 2007 through March 31, 2008.

The acquisition was accounted for as a purchase and was accomplished through the issuance of 2,911,117 Common Shares of MiMedx (for the acquisition of the SpineMedica Corp.’s Common Shares) and the issuance of 5,922,397 Series B Convertible Preferred Shares of MiMedx and 5,922,398 Common Stock Warrants (for the acquisition of SpineMedica Corp. Preferred Stock).

The Series B preferred stockholders had voting rights identical to those of common stockholders, were entitled to dividends only when, or if, declared by the Board of Directors and had preference over the common stockholders in the event of the Company’s liquidation.

The Series B Preferred Stock was convertible into Common Stock of MiMedx at the option of the holder at any time on a one share for one share basis, subject to adjustment for stock splits, stock dividends, recapitalizations and the like. All preferred stock automatically was to convert to common stock upon the Company becoming a publicly traded company, an upstream merger or consolidation, a sale of substantially all the Company’s assets or the consent of holders of the majority of the then outstanding shares of Series B Preferred Stock. As a result of the Alynx merger transaction, discussed in Note 8, all Series B Preferred Stock was exchanged for New Series A Preferred Stock.

The Common Stock Warrants were exercisable at $.01 per share from January 2009 through January 2010 and were automatically cancelled under any of the following conditions:

•

Preferred Stock sales for at least $3.00 per share.

•

Sale of a controlling interest in the Company of at least $3.00 per share.

•

Issuance of securities by the Company with $2,000,000 minimum proceeds at a minimum price of $3.00 per share.

•

Trading of the Series B Preferred Stock on a national or regional exchange, quotation system, or the OTCBB at a closing price of at least $3.00 per share for 15 out of 20 days on a rolling basis.

These Common Stock Warrants were cancelled on September 30, 2007 as the result of the Series C Convertible Preferred Stock sale (Note 8).

In addition, the Company assumed 1,333,750 common stock options and 175,251 common stock warrants to the holders of an equal number of SpineMedica Corp. options and warrants in connection with the acquisition. Terms of those options and warrants are summarized as follows:

Stock options:
Exercise price		$1.80
Range of expiration dates		April 2011 – April 2017
Warrants:
Exercise price		$1.80
Expiration date		October 2010

Finally, the Company’s note receivable, related party, deferred interest income related thereto and common stock warrant in SpineMedica (recorded as investment, related party) were cancelled pursuant to this transaction.

The SpineMedica acquisition was accounted for as a purchase and is summarized as follows (in thousands $):

Purchase price components:
Common stock issued		$	2,300
Preferred stock issued			7,403
Common stock warrants issued			20
Expenses incurred on acquisition			238
Cancellation of note receivable from and warrants in SpineMedica			2,049
Total consideration		$	12,010
Allocation of purchase price:
Cash (acquired at closing)		$	1,957
Prepaid expenses and other current assets			19
Property and equipment			464
Intangible assets (licenses — 10 year amortization period)			2,399
Deposits			34
Current liabilities			(898	)
Net assets received			3,975
Goodwill			858
In-process research and development (1)			7,177
		$	12,010

Significant assumptions used in connection with the determination of the value of the IPR&D were as follows:

•

Material cash inflows from the products were anticipated to commence in the near future.

•

Material anticipated changes from historical pricing and margins were not considered as there was no history for the products. There were projected increases in expenditures associated with the products development over the historical levels in order to advance the products through any regulatory agencies.

•

The risk adjusted discount rate applied to the estimated future cash flows was 43%.

The following pro-forma information presents a summary of the Company’s consolidated results of operations as if the SpineMedica acquisition had occurred at inception (November 22, 2006):

						Period from
						Inception
		Year				(November 22, 2006)
		Ended				through
		March 31, 2008				March 31, 2009
Loss from operations		$	(12,482,000	)		$	(33,360,000	)
Net loss		$	(12,073,000	)		$	(32,860,000	)

5.

Property and equipment:

Property and equipment consist of the following at March 31,:

		2009				2008
Leasehold improvements		$	793,899			$	746,382
Furniture and equipment			1,192,533				897,642
			1,986,432				1,644,024
Less accumulated depreciation			(610,536	)			(191,588	)
		$	1,375,896			$	1,452,436

6.

Intangible assets and royalty agreement: