Supplying insuffcient lubrication to the linear guides will greatly reduce the service life due to an increase in rolling friction. The lubricant provides the following functions;Reduces the rolling friction between the contact surfaces to avoid abrasion andsurface burning of the linear guides; Generates a lubricant fflm between the rolling surfaces and decreases fatique; Anti-corrosion.
1.Grease Linear guides must be lubricated with the lithium soap based grease before installation. After the linear guides is installed, we recommend that the guides be re-lubricated every 100 km. it is possible to carry out the lubrication through the grease nipple. Generally, grease is applied for speeds that do not exceed 60 m/min faster speeds will require high-viscosity oil as a lubricant.
2.Oil The recommended viscosity of oil is about 30~150cSt. The standard grease nipple may be replaced by an oil piping joint for oil lubrication. Since oil evaporates quicker than grease, the recommended oil feed rate is approximate 0.3cm³/hr.
3. Dust Proof Dustproot: Generally, the standard type is used in a working environment with no special requirement. lf there isa special dustproof requirement, please add the code (ZZ or ZS) after the product model.
Media Contact
Company Name: Zhejiang Pengyin Technology & Development Co., LTD.
Email: Send Email
Phone: +86 19957316660
Address:No.8 Sangdelan Road Wuyuan Street Haiyan County
City: Jiaxing
State: Zhejiang
Country: China
Website: https://www.pyglinear.com/
